VapoLS with Prometeia compressor: the best of both worlds

[Pedro Rocha]

Here is a mod in my Vapo LS done by Ricky

With this I can get the very good mounting system and electronics of VapoLS with the silence and effectiveness of the Prometeia..

Here is 1 photo


Besides Danfoss NL11F compressor Ricky put a new coil before the condensator...with very good results, that really exced my expectation

Evap Temp :

A gain of more than -10ºC ..impressive

No Bios :


In Windows :

A gain of more than-8ºC !!

Was calibrate with Ricky touch ..he is really perfectionist

Besides the cooling gains ..the compressor is almost noiseless
..what a diference from irritating fridge noise of the VapoLS standard compressor..

With 1.7V on the hot FX-55 013m at around 3.3, the fans at minimum speed (1200rpm) ..no noise at all ..here is the temps after one superpi 16mb ..



The best of booth worlds . my 24/7 system

Thank you Ricky .. for another great work

[...:::MadDog:::]

very nice , love your temps
It's a fusion of two great collers , vapo and prometeia...
Please show us some pics under load.

ps, your chipset isn't to hot ?

Hug'z from Portugal

[eliminate]

wow, that thing is awesome. Was it hard for Ricky to put that Prommy compressor in the Vapo?

[|RickY|]

no, just a litle hard to get the compressor inside the vapo box, it's needed to cut a litle the box hehehe, promy compressor e a litle bigger, love this cooler

load -58 on lcd, with a hot fx55 @1.7v 3.xxghz, perfect

[afireinside]

Nice work ricky!

Why are you getting lower temps than I did with DI? I must have used REALLY crappy springs...

[Vapor]

Really nice 24/7 cooling idea

[|RickY|]

note that the -62 on evap was with an fx55 @ 1.7v idle on windows with vapo heaters on we get -64 with fx55 @ 1.55v idle on windows with heaters on, we didn't test with vapo not mounted on cpu and undercharged, but i think lcd @ -70 possible, lcn, not reall temps, dont know the error of lcd

[C-BuZz]

props for an awesome job

C-BuZz

[Ssilencer]

Awesome job guys!
What gas are you using?
Ricky, Pedro, you know idle temps means nothing, show us some pics at load, running prime or cpuburn.

[piotres]

Please check unloaded with CHY502 on evap and compare it to readings from vapo's LCD ..we will know the truth .

How pressures it's working loaded ?

Peter

[|RickY|]

didn't measuse hi side, we didnt test it with a real termometer becouse we didn't even get the evap out of cpu

[TTmodder]

nice idea let's hope asetek see this and change their compressors to nl11f

[piotres]

Ricky : how about low side pressure ? What gas you have used ?

[pazza316]

What gas mixturee did you use for this and what charge?

[MeltedDuron]

looking good... i gota get me an LS

[Athens[2004]]

Nice Vapols@moded Here .

i ve got similar temps on my single [3/8 aspera 507&a few 410 (the new model nek2134 , that is quite alot ]

[Master_G]

Sweet mod with sweet results, lower temps and a quieter computer, who could want more?

G

[SustaiN]

Nice mod Ricky and REALLY impressive results!

[LittleDevil]

Can someone tell me how big is vapochill ls case? (height, width, lenght)...

tnx

[CrashOv3r1De]

Very nice Pedro, I am getting the same mod done but it is going to be a bit different.

I am also getting the NF-7 compressor. However I am also getting a chilly1 block and his mounting system (i can also use the LS mount if I like).

Chill control will be taken out and replaced with the newest version of the G-froster which has its own windows software and all. The CC v2 isnt a very good chill control and many of them have just died. Also it is not 100% mb compatible. It did not work on my eXpert for instance and im sure there are or will be a few other mbs.

I am really glad that you posted this review, gives me insight into what i am getting. Glad that it is real quiet and the temp drop is awesome too. My temps should be the same I guess but more stable and it will be able to hold load a bit better due to the c1 block.

LittleDevil www.asetek.com and click on cpu cooling/vapochill ls something like that its all there.

[Pedro Rocha]

Thanks

Where can I get that G-froster??

[Marvin]

pm chilly or Ssilencer.