Quote Originally Posted by Shoggy View Post
@zoomee: a first version of the aquasuite 2012 should be available this Friday.

@Phatboy69: your poweradjust should be available as 5th fan channel. You will not read the word poweradjust anywhere because it fully integrates to the aquaero as another fan channel. When a poweradjust is connected via aquabus (high speed port) it will appear automatically in the menu structure. There is no need to setup anything to get it working with the aquaero.
Is there anything connected to the PA2 and running? Otherwise you will not see any data in the aquaero.
Thanks Shoggy, i got the first 3 PA2's working and I can now see this is going to take a while to setup, test and install!

I know this isnt the place to report bugs but FYI.

A slight anomaly I noticed is the PA2's have trouble reporting the correct RPM signal. The AE5 fan controller with exact same programmed settings manages to display correct RPM though.

The PA2 reports 2500-2800RPM on the AE5 display page when set at 30% power when it is actually about 500rpm. It is tracking the controller power/temp curve I set for it though, but just isnt measuring and reporting the RPM pulses properly. Sometimes it will jump around a bit and very occasionally show the correct speed but it usually just displays 2800rpm. I guess the Aquabus might be susceptible to noise introduced to the bus, probably from the Fans LEDs?? At least the actual RPMs are consistent with the programmed curve.

I can replicate this on all PA2s with identical settings.