hi guys

here's a video i made to show droop is ok on this P67A-UD3R

in testing up to 1.55v with wprime ive seen droop go down by up to 0.024v which is pretty good, lower volts say 1.4 it would only droop 0.01v which is great. I didnt see any crazy droop some others mentioned. Im thinking the droop may not be enabled in some of the setups mentioned they droop more (possibly bios not enabling it properly)

for superpi there is no droop at all you get exactly what you set in bios

http://www.youtube.com/watch?v=a9Ziq8ESPfQ&hd=1

the board overclocks pretty nice, its responsive, seems to clock ram nice (havent done much testing with this CPU in terms of ram clocks in the past to compare). I can boot into windows with these settings 1123Mhz ram, not too bad . I have to put a CPU i know does certain speeds and timings and then see how hypers go on it. I did a quick test on this board with hypers and had to use 2T with this chip so not sure if its the CPU or bios.




What i need you guys to do please is provide full system spec including bios version on main and backup bios (if not sure copy main to backup bios to latest one you can find) and retest. can you also report bios set (maybe include ET6 voltage tab) and idle and load voltage during wprime for example please.

i suggest doing similar tests as per my video and reporting in this thread so i can show actual tests being done with droop delta with different boards that may still have issues.