Tri_block-mb

[JASSAF]

very nice job, the gold is nicely done.I assume this is your smaller rotating saw you can have, if so, thats a shame, your block could be even better with more smaller channels.

NB Block



the channels of the NB have to be less restrictive and the SB are going to be even lesser restrictive; the reason, the CPU block´s its very restrictive(microchannels roughly 1.8mm deep and 70 fins of 0.2mm (0.008") ,water channels of 0.25mm) and is similar to the Prototype CPU LGA 775-1366 ( http://www.xtremesystems.org/forums/...d.php?t=243003)

CPU Block




.