Prototype CPU LGA 775-1366

[JASSAF]

Prototype CPU LGA 775-1366

Copper Round (Diameter: 2.5 "x thickness 4.5 mm) with 42 microchannels of 0.33 mm thickness and 1.55 height ....the microchannels of the center (#18): 2,2 mm height





I need to make the collector channel in the Lathe and the "jet" plate . I´ll send more pictures of then outcome soon


.

[Wezly]

oooooooh

sub'd

[irenedakota]

Mr. Morello: I believe the correct answer to that question (Why do xyz when you can get abc) is simply 'Because I can'.

[leo_bsb]

Don't forget he is Colombia.
Imported goods are heavily taxed in South America, at least in Brazil.

[gmat]

And it's so rewarding and feeling good to make our own stuff. That custom block is awesome work so far Enjoy.

[JASSAF]

The channel configuration as shown is very efficient at dissipating heat, while keeping hydraulic losses minimized. This was proven by some CFD modeling I've done and verified with current designs on the market.

Having prototyped and installed my own custom block and have been using for a year now..... Pics are in my signature. I've gotta ask, why make your own, when you could buy a heat killer with the same design?

The work looks like good work and thanks for the pics!

the microchannel looks like the ones used by HK - EK Supr o XSPC, the efective disipation area of my block is smaller than, but i hope to compensate it with the design of the microchannel, the way the water enters the block and with the "jet plate" desing.

Why i dont wanna buy a comercial block? I am not paying $100 for an HK, becouse i can make another one that fits my taste its similar and its way cheaper.

When i am done crafting radiator (3x120) i will only have the Pump as an imported component.

Mr. Morello: I believe the correct answer to that question (Why do xyz when you can get abc) is simply 'Because I can'.

Don't forget he is Colombia.
Imported goods are heavily taxed in South America, at least in Brazil.

The idea is to market my products ... I hope

[JASSAF]

A small update in the prototype

collector channel almost finished (I have to increase its depth 0.8mm)




Area of microchannels 10.5cm2 .... effective heat exchange: 21cms2



a close up the microchannel

[skinnee]

Well done!!! I always like seeing the custom work, I know how much time and effort goes into the projects. Add that to the enjoyment you get on that first mount and successful bleed/fill.

Again, well done Jassaf!

[Wezly]

I want one....
It looks perfect.

[JASSAF]

Well done!!! I always like seeing the custom work, I know how much time and effort goes into the projects. Add that to the enjoyment you get on that first mount and successful bleed/fill.

Again, well done Jassaf!

in the Next few days i'll send you a PM

I want one....
It looks perfect.

how many you want



i am almost done









.

[voklskier4452]

excellent looking block, cant wait to see how it does

[ggdh]

Hi Jassaf, it seems that you have a leak from a right barb

[Waterlogged]

Hi Jassaf, it seems that you have a leak from a right barb

[Alexandr0s]

Thar she blows!

[e-Killer]

hehehe nice work jassaf hope buy some of ur products soon. i nneed too cool my 2 5850

[strike]

very nice

[kInOzAwA]

look forward for this great project

[eth0s]

When i am done crafting radiator (3x120) i will only have the Pump as an imported component.

Awesome job on that block man!

I'd also like to see pics of the home spun radiator, please.

[JASSAF]

I'm done, now polishing and electroplating.



: "jet" plate output: 100 mm2





.

[Utnorris]

Awesome job!!! Any plans on nickel plating them? I bet it would look even better nickel plated, not that it doesn't look great now.

[Bitemarks666]

very nice block, have you tested it yet, how does it perform?

[skinnee]

Well done JASSAF!!

[mlwood37]

very nice.

[bentleya]

Well done, and great job, JASSAF

[Boulard83]

THis is one of the best Costum Block ive seen so far. Great job.