Originally Posted by
Gameman
found some Prime-stability at 4.2 ghz, but I had to really jack up the northbridge - jesus
edit:
managed to get the vcore down along with the northbridge a bit and still have some stability - but there doesn't seem to be any way around that vtt issue...
oh well...I guess this is what it takes...
I have mine stable at these settings.
Code:
******************************
MB Intelligent Tweaker(M.I.T.)
******************************
Robust Graphics Booster ..............: [Turbo]
CPU Clock Ratio ......................: [8X]
x Fine CPU Clock Ratio................: +0.5
>>>>> Standard Clock Control
CPU Host Clock Control................: [Enabled]
x CPU Host Frequency(Mhz).............: [495]
PCI Express Frequency(Mhz)............: [100]
C.I.A.2...............................: [Disabled]
>>>>> Advanced Clock Control..........:
CPU Clock Drive.......................: [1000mV]
PCI Express Clock Drive...............: [800mV]
CPU Clock Skew........................: [ 0ps]
MCH Clock Skew........................: [ 50ps]
******** DRAM Performance Control ********
Performance Enhance...................: [Turbo]
MCH Frequency................: 333
System Memory Multiplier (SPD)........: [2.40B]
Memory Frequency(Mhz).................: 1188
DRAM Timing Selectable (SPD)..........: [Manual]
>>>>> Standard Timing Control
x CAS Latency Time................5...: [ 5]
x tRCD ...........................5...: [ 5]
x tRP.............................5...: [ 5]
x tRAS...........................18...: [18]
>>>>> Advanced Timing Control.........: [Press Enter]
(All Auto here)
>>>>> Channel A Timing Settings.......: [Press Enter]
x Static tRead Value............. (8)
(All Auto in Between)
x DDR Write Training..................: Disabled
>>>>> Channel A Driving Settings......: [Press Enter]
x Driving Strength Profile............: [1200MHz]
(All Auto in Between)
>>>>> Channel B Timing Settings.......: [Press Enter]
x Static tRead Value............. (8)
(All Auto in Between)
x DDR Write Training..................: Disabled
>>>>> Channel B Driving Settings......: [Press Enter]
x Driving Strength Profile............: [1200MHz]
(All Auto in Between)
****** Motherboard Voltage Control ******
-----------------------------------------------
>>> CPU
Load-Line Calibration.................: [Enabled]
CPU Vcore.....................: [1.37500V] Actual Idle [1.344] Actual Load [1.328]
CPU Termination........1.200V.........: [1.420V]
CPU PLL................1.500V.........: [1.570V]
CPU Reference..........0.760V.........: [.939]
>>> MCH/ICH
MCH Core...............1.100V.........: [1.52V]
MCH Reference..........0.760V.........: [.899]
MCH/DRAM Reference.....0.900V.........: [.970]
ICH I/O................1.500V.........: [1.500V]
ICH Core...............1.100V.........: [1.200V]
>>> DRAM
DRAM Voltage...........1.800V.........: [2.00V]
DRAM Termination.......0.900V.........: [.850]
Channel A Reference....0.900V.........: [Auto]
Channel B Reference....0.900V.........: [Auto]
(All CPU Features Turned Off)
Reply With Quote
Bookmarks