"ASUS P5Q Deluxe discussion".

[megatron]

Bios 2201

ASUS P5Q DLX Template :

JumperFree Configuration Settings
AI Overclock tuner: Manual
CPU Ratio Setting: Auto (8.5)
FSB Strap to North Bridge: 333
FSB Frequency: 450
PCI-E Frequency: 101
DRAM Frequency: 5:6 [DDR2-1081Mhz]
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: Auto

1st Information :

CAS# Latency: 5
DRAM RAS# to CAS# Delay: 5
DRAM RAS# Precharge: 5
DRAM RAS# Activate to Precharge: 18
RAS# to RAS# Delay : 3
Row Refresh Cycle Time: 42
Write Recovery Time: 6
Read to Precharge Time: 3

2nd Information :

READ to WRITE Delay (S/D): 7
Write to Read Delay (S): 3
WRITE to READ Delay (D): 5
READ to READ Delay (S): 4
READ to READ Delay (D): 5
WRITE to WRITE Delay (S): 4
WRITE to WRITE Delay (D): 7

3rd Information :

WRITE to PRE Delay: 14
READ to PRE Delay: 5
PRE to PRE Delay: 1
ALL PRE to ACT Delay: 5
ALL PRE to REF Delay: 5
DRAM Static Read Control: Disabled
DRAM Read Training: Disabled
MEM. OC Charger: Enabled
AI Clock Twister: Lighter
AI Transaction Booster: Manual
Common Performance Level [10]
Pull-In of CHA PH1: DISABLED
Pull-In of CHA PH2: DISABLED
Pull-In of CHA PH3: DISABLED
Pull-In of CHA PH4: DISABLED
Pull-In of CHB PH1: DISABLED
Pull-In of CHB PH2: DISABLED
Pull-In of CHB PH3: DISABLED
Pull-In of CHB PH4: DISABLED

CPU Voltage: 1.36250
CPU GTL Voltage Reference (0/2): 0.640 (helped lowering vcore a bit, 0.615 was the wrong side of default to go, and auto 0.630 was unstable after I dropped vcore a bit)
CPU GTL Voltage Reference (1/3): AUTO [0.630]
CPU PLL Voltage: 1.52 (+0.02 over default)
FSB Termination Voltage: 1.22 (+0.02 over default)
DRAM Voltage: 2.08v (Using the old crucial ram like crucial anniversary so I'm not held back by Corsair xms6400c5 2x2Gb)
NB Voltage: 1.36 (I have not tried to go lower, 4 dimms though)
NB GTL Reference: AUTO
SBridge Voltage: 1.2 (+0.1 just to be sure)
PCIE SATA Voltage: 1.5 or minimum (had xonar errors when on 1.6 once)

Load Line Calibration: Disabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew : Auto
NB Clock Skew : Auto
CPU Margin Enhancment: Optimized

Advance CPU Settings
CPU Ratio Setting: Auto
CPU VID: Default
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Intel® Virtualization Tech: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled