DFI UT X58-T3EH8 continued - Part 2

[sjakie666]

i didn't use a dmm but it was the same psu on the boards.

no cable,no audio module: 12.16v idle 12.096v load 1.28v vvt(idle) 1.68v vdimm(idle)
no cable,with audio module: same

1 cable(near NB), no audio module: 12.16v idle 12.16v load 1.296v vvt(idle) 1.696v vdimm(idle)
1 cable(near NB), with audio module: 12.16v idle 12.16v load 1.296v vvt(idle) 1.696v vdimm(idle)

2 cables, no audio module: 12.224v idle 12.16v load 1.296v vvt(idle) 1.696v vdimm(idle)
2 cables, with audio module: 12.16v idle 12.16v load 1.296v vvt(idle) 1.68v vdimm(idle)

Under load vvt and vdimm will be the same on all option(1.312v vvt, 1.68v vdimm)

this board is the best i've had.(1xrev.A58, 2xrev.A56 and now rev. AB1)

can't use a dmm. maybe someone else could?