Aquaero with the new Powerbooster able to control DDC pumps!

[Brodholm]

Hello folks. I just saw this on the aqua-computer site. Its a extra cooling "bracket" or what I should call it that makes it possible for extra wattage on all channels. And If I understand correctly, you will be able to control ddc pumps right from the Aquaero itself.

But there options as I can see 3 kits. One when you can do it yourself and you loose the warranty (10€). And one that you can send your aquaero to them and they do it and you keep the warranty (20€). And if you order a new one and want one installed it costs you about 15€ and you don't void warranty.
Anyway, here it is[/B]


This gives the aquaero with booster the following specs:
Channel #1: 25W.
Channel #2-4: 15W each.
Total wattage drawn should not exceed 45W.

A Aquaero without this have these specs:
Channel #1-4: 10W each.
Total wattage drawn should not exceed 30W.

Anyway this should solve many peoples trouble finding when trying to find a good and fail-safe controller to control pumps with.

Anyway here is the full text translated with google:

By aquaero power booster, the maximum output of the four fan channels from 10W to 15W higher. The max. Overall performance of the aquaero with the power booster from 30W to 45W increased.

The aquaero power booster consists of a stainless steel bezel engraved with a generously sized aluminum heatsink on a Wärmleitpad bind to the voltage and for a significantly improved heat dissipation makes. The engraving on the bracket makes it easy to connect an accessory, as all connections are clearly marked.

Performance Enhancement of Channel 1:
An additional modification to the motherboard can also aquaero for channel 1, an output power of 25W to be achieved and is used to control the pumps Laing DDC-1T and DDC-1T Plus Series provides. A Laing pump can best be regulated, as it is a perfect speed control by entering the Wunschrehzahl possible. Should the pump stop, it will automatically power to re-start the pump increases, and then approached the desired speed. In addition, the pump at the start of the first full aquaeros started and then shut down. Since the pump is used for the fan output over temperature sensors can be controlled, it is the pumping well in a temperature dependence (eg water) govern.
A description of the modifications necessary to get the support request. Please note that when you perform the modification of the guarantee lose. If you want to keep these, so please order the power booster as a subsequent upgrade in which the modification in our house is being carried out and the guarantee is preserved.

The power booster is a Wärmeleitpad and the necessary mounting accessories delivered.
The aquaero is not included.

Note:
The power booster can only aquaeros series of 4:00 may be used.