Quote Originally Posted by Ghostleader View Post
Well here we go again, Q9650@500 4,0GHz and 4x2 OCZ Reaper PC8500@1000 555 15 tRD10.

Itīs stable with 30 loop LinX (~3,5hrs, max problem size and max memory use), 10hrs with four instances of P95 blend, Is it stable or what.

Pretty nice 24/7 setup I most say.



Code:
Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto 
CPU Clock Ratio .......................: 8
CPU Frequency .........................: 4.0GHz (500X8)

Clock Chip Control 

Standard Clock Control

CPU Host Clock Control.................: [Enabled] 
CPU Host Frequency (Mhz) ..............: 500 
PCI Express Frequency (Mhz) ...........: 100 
C.I.A.2 ...............................: [Disabled] 

Advanced Clock Control

CPU Clock Drive........................: Default
PCI Express Clock Drive................: Default
CPU Clock Skew (ps)....................: 0ps 
MCH Clock Skew (ps)....................: 50ps 

DRAM Performance Control

Performance Enhance....................: Turbo
Extreme Memory Profile (X.M.P.)........: Disabled 
(G)MCH Frequency Latch.................: 400MHz 
System Memory Multiplier ..............: 2.00D 
Memory Frequency (Mhz) ................: 1000MHz

Standard Timing Control

CAS Latency Time.......................: 5 
tRCD ..................................: 5 
tRP'...................................: 5 
tRAS...................................: 15 

Advanced Timing Control

Everything In Advanced Timing Control on auto.  

Motherboard Voltage Control

CPU

Load-Line Calibration..................: [Enabled] 
CPU Vcore..............................: 1.3875
CPU Termination........................: 1.30
CPU PLL................................: 1.57
CPU Reference..........................: 0.760 (ET6) 

MCH/ICH

MCH Core...............................: 1.34
Reference..............................: 0.840 (ET6) one step up or down, LinX error within 5min
MCH/DRAM Ref...........................: Normal
ICH I/O................................: Normal
ICH Core...............................: Normal 

DRAM
DRAM Voltage...........................: 2.10
DRAM Termination ......................: Normal 
Channel A Reference....................: Normal
Channel B Reference ...................: Normal
its not happening m8 blend fails after a few min and when i set mch ref to .840 it bsods and says video memeory error i am small ffts stable just not blend