Asus M3A79-T Deluxe

[MadDias]

Hey mad I just wanted to confirm how you did this.........Gotvoltage says to leave the ht and NB at stock then overclock using just the multi and stock voltage......once you hit your wall at stock voltage you raise the cpu nb voltage to see if it will stabalize......if it does you continue to move forward on the cpu speed until you need cpu voltage again lets say 1.4 or 1.45v till you hit the next wall then raise the cpu nb voltage again to see if it assists.

At least this is what I understood from his post.

that´s what i did. and the wall where i first had to up cpu vid was at 200x16.5.
erverytime i upped the multi again i also had to add cpu vid.
it´s not the first time for me