Quote Originally Posted by The-Fox View Post
So If I want to go over the 4Ghz "limit" I need to increase my DRAM voltage above 1.65 ?
And if I want to go above 1.65v I need to keep my QPI/VTT voltage at least 0.5v lower than Vdimm ?
Its getting a bit confusing i might say, what else is that it has no logical explanation to all that

BTW, I had no problems running my QPI/Dram Core (Asus Terminology) at Voltages up to 1.65v on P6T Deluxe.
Just haven't tried higher than that as it seems to have no effect above 1.6v and above 1.65v is too much voltage IMO.
I am watercooling my chip pretty good, so far My max temps are about 60-65c on the hottest core, so extreme high temps are not an issues for me.
My full spec is at my sig below.
You you got that right, if you increase the vdimm you have to watch that your qpi vlotage is not lower then 0.5V then your vdimm voltage.

There are people that run Qpi voltage 1,4V+ so i dont think its gona be a big problem. But you dont really need uncore clock that high, cause the gained performance is only benchable but thats all. You wont notice any difference while working.