Phenom 9950 Overclocking

[gOtVoltage]

well Im doing

bus speed 264mhz x12.5 =3.3ghz
NB 264x9= 2376
HT same as above
memory frequency 1/2 528mhz



cant find ay of these settings in my bios

Hmm ill see if i can find the info for your Mobo about the PCI-E lane Watts..This helps alot especially if you are Overclocking the Vid too. Also Raising the NBchipset to 1.32 will help stabilize the CPU and NB when clocked High..(This helps ram and Chipset ) This is not the NB on CPU.

On My ASUS 79-Te CORE-Pci-E volts setting to raise my NBChipset.

If i do not set CORE-PCI-e to 1.3 -1.32v i can not run High NB Above 3.4ghz.

Regardless of CPU/NBvid and CPU/NB volts.

From reading your Bios settings from DKA 790gx you dont have the PCI-E lane watts or it wasnt put in the Manual

Also it shows a NB voltage setting ..
This i believe is your Chipset..

To find out Raise it to 1.32v and then go into AOD and see if the NB voltage reads 1.32v.. It it does your set. Then try to Oc more. Should make a diferrance . That means that NB setting is the chipset volts.

It will show ,,

CPUvid/NBvid/memoryvolts/HTvoltage/(NBvoltage -its this one)HTvoltage in performane menu.

. You should keep that @ 1.3-1.32v.. It will help.