With a case width of 20", there's enough room to mount an inverted
motherboard on the right hand side and still have enough room to tuck
cables in between them.




I seen this Aquacomputer Aquatube for a tube reservior and really liked it.
It's kinda Nautical which correlate's to water cooling.
But I couldn't find it here in the great white north as they say.



So I got a Micro-Res, and designed my own mount for it.
Hope you like it.





Used the same 6 hole pattern as the Aquatube and drilled a 2 1/4" hole for the round window using a holesaw.



Now for a lot of filing work as you can see.



Here's a test fit, think it will work OK.



Made a top and bottom plate that attaches using cap screws which will be hidden from the front.
It will have to be mounted from behind, but I can live with that.

Couple of pic's showing the reservior attached.





I used a 4mm piece of acrylic, secured that with 6 screws to the face plate.
So I now have to attach the 4mm acrylic to the micro-res and i couldn't use any kind of fastener I could think of, so i used 4 small triangular pieces of double-sided mounting tape made by 3M.

You can barely see the triangular pieces in the lower left and right side.



That's all for now, will post an update tomorrow.

zuess