[18th Anniversary] Asus Black Pearl - P5k-Premium Testing Report

[sesdave]

Keeping all these constant i had tried reducing the CPU voltage from 1.45v to 1.4375, and it seems this is the right voltage at which the system is stable. However I was wondering if i should try reducing any of the above voltage. And what should i ideally set "DRAM Static Read Control" to?

I am using the stock CPU fan, and my CPU is in the range of 50 - 65 c temperature and during high stress @ 65 - 73 c.

Thank you,
Rajeeb

!.4375 seems very high for running 3.2. You should be able to run 3.0-3.2 on 1.35v or less- what batch and VID is your CPU. You dont want temps like that - reduce vcore . I would recommend another HSF like mine or better - the stock fan is limited if you are overclocking. Also get some decent thermal paste like MX-2. Ideally DRAM static should =enabled for performance but you are probably best to leave disabled until you stabalise the overclock. Check my previous post for link explaining all the BIOS settings.