Hi KTE

The reason of high voltages, have to do with the reboot problems reported, this board boots fine with less voltages but if after program install it ask for reboot, the board refuse to boot and after a reset shows overclocking failure.
After playing around with all settings the ones I used was the best ones for that problem, anyway that was the last run on that board, I send it back to shop bcz I had order the Wifi/Ap version and they had send the normal Deluxe, I had to wait till now bcz shop closed for holidays, got my cash back and I will order another board, ATM and after the ASUS experience (OC/BIOS/LAYOUT) don't know witch one to order, but must be with eeprom removable since I like to mess with bios, and with the MSI I can't (I have an Serial cable 2 SPI chip but no program I know recognize it). That was the reason I bough ASUS, to be able to recover from a bad flash/bios.

About ASUS layout you can't use 4 dual slot graphic cards, like the 2 I got (with MSI it's possible) SATA ports are well placed and horizontal connection is cool, if MSI had those it will be "almost" perfect.

On the MSI side I can't use the Power/Reset buttons bcz 2nd card are on top.

ATM I'm using the MSI still have 1.31 bios, just plugged CPU and all the staff, 2800Mhz without enter in CMOS setup, need to check the settings I left couple weeks ago

BTW you deserve that free parts you are receiving, you are doing an real good job, and I'm sure like me others are buying RD790 systems relying on your expertise, including tictac, polygon and others.

I'm grateful to all of you guys, keep it up