-
So I passed the memtest 760 percent coverage @ 1.55nb, 1.35cpu, 1.48fsbvtt, ddr2 @ 2.28v.. but try doing the blend test and am failing within 15 minutes now?
What is the problem? I am trying to mess with settings... it passed the blend test before with 1.47nb, 1.42fsbvtt, 1.35cpu ddr@2.28v but I needed to up the volts to pass the prime blend/geoforms at the same time because it would crash my cpu.
Also, I was wondering why a lot of people here with q6600 oc to 3.6ghz use much lower voltage than the anandtech review of the maximus. They recommended 1.61-1.7nb for anything past 440fsb, and 1.5-1.6fsbvtt for anything past 440fsb. Did they get it totally wrong or does the newer bios play a role? I can't seem to get my cpu stable enough to pass all tests. Always seems to pass 2 out of 3. (OCCT, Prime, Memtest)
Another thing, should I enable or disable CPU TM Function and Vanderpool Tech. in bios?
Last edited by masterkaj; 01-05-2008 at 08:52 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote
Bookmarks