Sneil SLI-CF Cascade (56k)

[Sneil]

Well Ive mainly kept my builds to EOCF and a few other forums, lurking and posting here every so often. However, I see there are not many Canadian builders around so I've decided to make my presence here known a little better and show my builds and converse here with the larger Phase community we have here. Anyway I'll start with my Cascade build, still currently in the works but close to completion. This one is going to be a personal unit for myself for some major 3D benching and gaming sessions with the cpu under a regular SS(1hp rotary). I made the case myself out of MDF particle board and used 2 layers primer, 3 layers paint and 3 layers clear coat for the paint job.

So here are the specs:

1 Stage:
Compressor: ROTARY Matsu$hita 2P19C3R126A- 18.1cc (12,680 BTU)
HX: 20 plate
TXV: Danfoss/00 orfice
Reciever: Danfoss
condenser: 4X 6x6 row cubes (made by Drewmiester)
refrigerant: R507
safety: Adjustable hp cut-off, low and high side mounted gauges

2nd Stage:
Compressor: ROTARY Matsu$hita 2P19C126A- 18.1cc (12,680 BTU)
Evaporators: 2 X Kayl evaps rev 2
Desuperheater: chilly1 blue ss condenser
Cap tubing: 2X .031 ~8ft (still undecided)
sight glass: Danfoss
refrigerant: R1150 Ethylene
oilseparator: HENRY S-5180 Helical
safety: Adjustable hp cut-off, hp relief valve, low and high side mounted gauges

Cascade Controller by Ssilencer and Golden Eagle
Big thanks to Drewmiester for the condenser and all the help he's provided these past years!