Quote Originally Posted by lazy View Post
Yes i did enable this feature in the bios.
Just starting to run Orthos right now running at 445*9 right now
Vcore = 1.456 / FSB VVT = 1.45 / NB = 1.47 (Smart Guardian/CPU-Z reading)

Initially once the computer was booted into windows, CPU-Z reported Vcore @ 1.476 but once on load it dropped down to 1.456
Additionally FSB VVT was set to 1.46 but drops to 1.45 and NB set to 1.5 drops to 1.47 on smart guardian.

Once again these are readings from a windows program so i can not say it is 100% correct

It will probably take some time to get this set-up stable so i might just skip this stage for now and try for max fsb on air


Added my sta for it
Could u please disable the vcore control feathure and try again if u see vdroop from idle to load, as on the p35 T2R, disable this feathure will, give u actually 0 vdrop and vdroop, according to some P35 T2R owners. Thanks