** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[NoGuru]

Wow some nice runs guys. Congrats on the 5 GHz Serg!

[andressergio]

Wow some nice runs guys. Congrats on the 5 GHz Serg!

thanks my friend

[Hondacity]

hi

what is the clockgenerator for ep45t-usb3p?

thanks

[NoGuru]

hi

what is the clockgenerator for ep45t-usb3p?

thanks

Well EasyTune6 would be a better choice.

[Hoss331]

hi

what is the clockgenerator for ep45t-usb3p?

thanks

Have you tried the one for the ud3? ICS9LPRS914EKL

[andressergio]

hi

what is the clockgenerator for ep45t-usb3p?

thanks

ICS9LPRS914EKL working for me

[Hondacity]

thanks hoss & andre ..i'll try that

andre you have the board.....please check thanks

[In-Fluence]

Serg's right - think either the chip or the option on setfsb ends in 'EKLF'.

I managed a 10min22.2 sec PI32 run at 4.86GHz/1440 6-7-6-18 PL8 earlier today, was hoping for a little better, particularly as I managed the lat run at 4.91GHz on the UD3P. When it cools, I'll have another go, perhaps at different ram ratios like some of you.

Serg, that's gonna be a sweet 24/7 system, nice work

Those Gskill ecos aren't bad at all, I'm priming away nicely at 1920MHz 7-9-7-24, but they do run warm at 1.58v. How much voltage are you giving yours?

Could you post your 4.75GHz settings please mate?

[andressergio]

thanks hoss & andre ..i'll try that

andre you have the board.....please check thanks

Honda i use the one i posted

[andressergio]

Serg's right - think either the chip or the option on setfsb ends in 'EKLF'.

I managed a 10min22.2 sec PI32 run at 4.86GHz/1440 6-7-6-18 PL8 earlier today, was hoping for a little better, particularly as I managed the lat run at 4.91GHz on the UD3P. When it cools, I'll have another go, perhaps at different ram ratios like some of you.

Serg, that's gonna be a sweet 24/7 system, nice work

Those Gskill ecos aren't bad at all, I'm priming away nicely at 1920MHz 7-9-7-24, but they do run warm at 1.58v. How much voltage are you giving yours?

Could you post your 4.75GHz settings please mate?

hey influence how are you mate ?

thanks !

I sold the ecos got the PIS 2000CL6 and waiting for 2200 CL8 hypers, just searching the best RAM for me setup

On the UD3P i couldnt do 4750 the way im doing now mem was a limiting factor for a stable system, yes till 5ghz+ for bench, now im searching the best combo, still tweaking it. Remember i have the X3380 im working on 9,5 multi

For Mem im searching the best combination as i need a lot of MCH if i tight timmings at that speed, 1,56MCH for ex, this is my first template im working on it

******Motherboard Intelligent Tweaker (M.I.T.)******
 
Robust Graphics Booster.........................[ Turbo    ]
CPU Clock Ratio.................................[ 9        ]
Fine CPU Clock Ratio............................[ + 0.5    ]
CPU Frequency 4.5GHz............................[ 500 x 9.5]
 
******Clock Chip Control******
 
CPU Host Clock Control..........................[ Enabled  ]
CPU Host Frequency (Mhz)........................[ 500      ]
PCI Express Frequency (Mhz).....................[ 101      ]
C.I.A 2.........................................[ Disabled ]
 
******Advanced Clock Control******
 
CPU Clock Drive.................................[ 900mv   ]
PCI Express Clock Drive.........................[ 900mv   ]
CPU Clock Skew..................................[ 0ps     ]
MCH Clock Skew..................................[ 50ps    ]
 
******DRAM Performance Control******
 
Performance Enhance.............................[ Standard ]
Extreme Memory Profile (X.M.P)..................[ Diaabled ]
(G) MCH Frequency Latch.........................[ 333      ]
System Memory Multipler.........................[ 3.20B    ]
Memory Frequency 1066...........................[ 1600     ]
DRAM Timing Selectable..........................[ Manual   ]
 
CAS Latency Time................................[ 7       ]
tRCD............................................[ 8       ]
tRP.............................................[ 7       ]
tRAS............................................[ 24      ]
 
******Advanced Timing Control******
 
tRRD[4].........................................[ 4       ]
tWTR[5].........................................[ 5       ]
tWR[10].........................................[ 10      ]
tRFC[74] .......................................[ 88      ] 
tRTP[5].........................................[ 5       ]
Command Rate (cmd)[0]...........................[ Auto    ]
 
******Channel A Timing Settings******     
 
Static tRead Value        [ 11] ................[ 8       ]
tRD Phase0 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto    ]
 
tRD 2rd (Differnt Rank)   [ 8 ] ................[ 8       ]
tWR 2wr (Differnt Rank)   [ 8 ] ................[ 8       ]
tWR 2rd (Differnt Rank)   [ 7 ] ................[ 7       ]
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ 9       ]
 
Dimm 1 Clock Skew Control.......................[ Auto    ]
Dimm 2 Clock Skew Control.......................[ Auto    ]
DDR Write Training..............................[ Auto    ]
 
******Channel A Driving Settings****** 
 
Drive Strength Profile..........................[ Auto    ]
Data Driving Pull Up Level......................[ Auto    ]
cmd Driving Pull Up Level.......................[ Auto    ]
ctrl Driving Pull Up Level......................[ Auto    ]
clk Driving Pull Up Level.......................[ Auto    ]
 
Data Driving Pull Down Level....................[ Auto    ]
cmd Driving Pull Down Level.....................[ Auto    ]
ctrl Driving Pull Down Level....................[ Auto    ]
clk Driving Pull Down Level.....................[ Auto    ]
 
******Channel B Timing Settings******     
 
Static tRead Value        [ 11] ................[ 8       ]
tRD Phase0 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto    ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto    ]
 
tRD 2rd (Differnt Rank)   [ 8 ] ................[ 8       ]
tWR 2wr (Differnt Rank)   [ 8 ] ................[ 8       ]
tWR 2rd (Differnt Rank)   [ 7 ] ................[ 7       ]
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ 9       ]
 
Dimm 1 Clock Skew Control.......................[ Auto    ]
Dimm 2 Clock Skew Control.......................[ Auto    ]
DDR Write Training..............................[ Auto    ]
 
******Channel B Driving Settings****** 
 
Drive Strength Profile..........................[ Auto    ]
Data Driving Pull Up Level......................[ Auto    ]
cmd Driving Pull Up Level.......................[ Auto    ]
ctrl Driving Pull Up Level......................[ Auto    ]
clk Driving Pull Up Level.......................[ Auto    ]
 
Data Driving Pull Down Level....................[ Auto    ]
cmd Driving Pull Down Level.....................[ Auto    ]
ctrl Driving Pull Down Level....................[ Auto    ]
clk Driving Pull Down Level.....................[ Auto    ]
 
******Motherboard Voltage Control******
 
Load-Line Calibration...........................[ Enabled ]
CPU Vcore         [ 1.2     ]...................[ 1.50    ]
CPU Termination   [ 1.20    ]...................[ 1.42    ]
CPU PLL           [ 1.50    ]...................[ 1.570   ]
CPU Reference     [ 0.760   ]...................[ 0.924   ] 
 
MCH Core          [ 1.100   ]...................[ 1.52    ] 
MCH Reference     [ 0.760   ]...................[ 0.939   ]
MCH/DRAM Refernce [ 0.900   ]...................[ Auto    ]
ICH I/O           [ 1.500   ]...................[ 1.500   ]
ICH Core          [ 1.100   ]...................[ 1.200   ] 
 
DRAM Voltage      [ 1.500   ]...................[ 1.72    ] 
DRAM Termination  [ 0.900   ]...................[ Auto    ]
Channel A Ref     [ 0.900   ]...................[ Auto    ]
Channel B Ref     [ 0.900   ]...................[ Auto    ]

******Advanced BIOS Features******
 
Limit CPUID Max to 3............................[ Disabled ]
No-Execute memory Protect.......................[ Disabled ]
CPU Enhance Halt (CIE)..........................[ Disabled ]
C2/C2E State Support............................[ Disabled ]
C4/C4E State Support............................[ Disabled ]
CPU Thermal Monitor.............................[ Disabled ]
CPU EIST Function...............................[ Disabled ]
Virtualization Technology.......................[ Disabled ]

Cheers
Sergio

[Hondacity]

i used the clockgen you mentioned..its not letting me "set" fsb

weird

[andressergio]

i used the clockgen you mentioned..its not letting me "set" fsb

weird

working perfect for me

i used to move from 500 to 505 to show you

[Hondacity]

ok i check the clockgen just below the vregs for the northbridge..it is ICS9LPRS914EKL

i'll try again..

thanks

[Persnikitty]

Thanks to all of you for the wonderful information, tips and templates, especially Bluestang for his XP ACHI fix. I kinda muffed it the first time, wiped out ntldr and got bad_pool screens in when attempting reformat or recovery. It was a good thing I still had a Win7 RC dvd, since that allowed me to format C painlessly. After the reinstall and final windows update, I made very certain to use Xpress Recovery2 for a primary backup, which has already proven handy.

I got this board after a little over a year of using the slow upgrade path with an Asrock 4CoreDual-Sata2 (Via 880). Once I replaced my 7600GT AGP with a GTS250, all that was left was to change the motherboard (gotta love those quirky Asrock upgrade boards). Got the UD3L last Tuesday (after spending the weekend prior reading every single thread and taking notes) and promptly hit the 370 wall. With some tinkering, and much pouring over five different templates, I was able to sit comfortably at 400.

Below are my settings should they prove useful.

    Motherboard: Model: EP45-UD3L Rev#: 1.1 Bios Version: F9
    Cpu: E7400 R0 266 x 10.5 0.85v-1.3625v
    Ram: Gskill, F2-6400CL5D-4GBPQ, http://www.gskill.com/products.php?index=46
    Power Supply Unit: PCPower, Silencer 500W, Single Rail @ 35A, 80+Bronze
    XP SP3

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [9]
    Fine CPU Clock Ratio ----------------- : [0.5]
    CPU Frequency ---------------------: 3.80GHz (400 x 9.5)

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [400]
    PCI Express Frequency (Mhz) ---------- : [100]

    C.I.A.2 ------------------------------ : [Disabled]

    Advanced Clock Control
    CPU Clock Drive ---------------------- : [900]
    PCI Express Clock Drive -------------- : [900]
    CPU Clock Skew (ps) ------------------ : [100]
    MCH Clock Skew (ps) ------------------ : [50]

    DRAM Performance Control
    Performance Enhance ------------------- : [Standard]
    (G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [2.00B]
    Memory Frequency (Mhz) ---------------- : [800]
    DRAM Timing Selectable ---------------- : [Manual]

    Standard Timing Control
    CAS Latency Time -------- 5 ---------- : [5]
    tRCD ------------------- 5 ---------- : [5]
    tRP --------------------- 5 ---------- : [5]
    tRAS ------------------- 15 ---------- : [15]

    Advanced Timing Control
    tRRD ------------------- 3 ---------- : [3] If these are left on auto, I have memory-related bsods.
    tWTR ------------------- 3 ---------- : [3]
    tWR --------------------- 6 ---------- : [6]
    tRFC ------------------- 52 ---------- : [52]
    tRTP ------------------- 3 ---------- : [3]
    Command Rate (CMD) -------------------- : [Auto]

    Channel A
    Static tRead Value --------------------- : [10] 9 causes issues
    tRD Phase0 Adjustment ------------------ : [Auto]
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps

    Channel B
    Static tRead Value --------------------- : [10] 9 causes issues
    tRD Phase0 Adjustment ------------------ : [Auto]
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps

    Motherboard Voltage Control
    CPU
    Voltage Types------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Enabled]
    CPU Vcore --------------- 1.2875 ---- : [1.3625]
    CPU Termination --------- 1.200V ----- : [1.24]
    CPU PLL ----------------- 1.550V ----- : [1.55]
    CPU Reference ----------- 0.805V ----- : [0.787] 0.76 ET6

    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.32]
    MCH Reference ----------- 0.760V ------- : [0.785] 0.76 ET6
    ICH I/O ----------------- 1.55V ------- : [1.55]
    ICH Core ---------------- 1.10V ------- : [1.10]

    DRAM
    DRAM Voltage ------------ 1.80V ------- : [1.80]

I was able to reach 480 (485 made for a CMOS reset), but the 1:1 memory proved to be mightily unstable, though I'm surprised I even reached that far. 444/888 was do-able, though I kept failing Priority 10 Orthos Blend; just couldn't seem to nail down the proper timings, thanks in large part to the limited divider options for my ram. For the cpu, 3.8 seems to be the top end for me, as anything higher needs a large vcore jump, a bit more than I'm comfortable with on air. After I make another backup, now that all my core programs are installed, I'll probably give it another go.

@sergio: Congrats on the healthy birth. I can already tell he's gonna be one handsome devil.

[systemviper]

you know it's strange, but my board hates any skews or any pcie express clocks above 100.... when i try to add those to get higher, it won;'t boot

[Persnikitty]

Ah. With skews at stock, I was having issues passing Orthos FFT-8 Pri:10, using VR-Zone's stability guide until I tweaked those a bit when above 460. It was either that or tinker with higher voltage settings. I got the notion from several of the templates I pulled for study.

[Dark-Energy]

Skews were a lifesaver for me in getting my Q9550 to stop freezing up everytime.

I think they are at 150/200 right now, haven't had any problems since.

[systemviper]

Well I broke down and made a new benching drive for my UD3P
Using BenchZoners ISO's. I used the XP load and just got it running.

thanks BZ!

got to love installing a OS @ -40c

So here is one of my first run=s

Sergio this budz for you

[bluestang]

Some things are just not fair!

[In-Fluence]

Niiice

[Persnikitty]

Just wow! SV, that is really cool. I'm continually amazed at this board family, and y'all's skill at bringing out the most of every component.

[zsamz_]

Well I broke down and made a new benching drive for my UD3P
Using BenchZoners ISO's. I used the XP load and just got it running.

thanks BZ!

got to love installing a OS @ -40c

So here is one of my first run=s

Sergio this budz for you

thats it
man them gigabut boards suk
push harder

[Hoss331]

Well I broke down and made a new benching drive for my UD3P
Using BenchZoners ISO's. I used the XP load and just got it running.

thanks BZ!

got to love installing a OS @ -40c

So here is one of my first run=s

Sergio this budz for you

Getting better ever time, keep it up.

[andressergio]

Well I broke down and made a new benching drive for my UD3P
Using BenchZoners ISO's. I used the XP load and just got it running.

thanks BZ!

got to love installing a OS @ -40c

So here is one of my first run=s

Sergio this budz for you

grats viper but i can better than very easy just dont have xp but maybe i install it

[systemviper]

grats viper but i can better than very easy just dont have xp but maybe i install it

I always love that "easy" stuff....

if it was easy it would already be posted!

guess you better find an xp load....

I used a BenchZoner load for xp that i downloaded from here...

Getting better ever time, keep it up.

Thanks Bro, I just got to find the best Ram for the job,

i need to break out of the 9's to even get close to
Jor3llBR/Elano's 8sec 850ms

That is gonna take some work