after the prime we ran an 06 and it held fine
after the prime we ran an 06 and it held fine
Last edited by bazx; 03-16-2009 at 12:47 PM.
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
Bazx congrats!!
I bet this feels awesome !!!
Never empower an idiot with a response....
http://en.wikipedia.org/wiki/Troll_%28Internet%29
Seller/Buyer Reputation:
Heatware: http://www.heatware.com/eval.php?id=50905
Ebay: {Family Account} Kasyg3 http://myworld.ebay.com/kasyg3/
Ebay: {My personal Account} Sdumper http://myworld.ebay.com/sdumper/
iTrader: http://www.blazingpc.com/forum/itrader.php?u=28
man you have no idea how many times i have almost given up on this refrigerantOriginally Posted by sdumper
it has been a real challenge
but you are bang on i am very pleased
thanks
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
here is a suicide shot from tonight not an oc just off the multi
http://valid.canardpc.com/show_oc.php?id=528459
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
Holy smoke, bazx. This is a real accomplishment!
Hats off to you, sir!
EK Water Blocks R&D
ekwb.com
Hobby: Rotary SS bench unit (LPG/R-507) | -75°C Auto-cascade (R-600/R-290/R-744) | Plate HX water chiller (1kW cooling power) | My 2nd cascade MP14FB R-507/R-1150 | Mini cascade R-507/R-1150 | GPU single-stage | Mach I restoration mod -> -38°C @ 230W
Milestones: 7.12GHz P4 | 6.84GHz K10.5 | 6.45GHz Ci5 | 3.31GHz K7
3DMark2001SE -> Favourite Game!
Thats awesome I want a Phenom II so bad right now but the wife is already having fits about my tool purchaseshere is a suicide shot from tonight not an oc just off the multi
http://valid.canardpc.com/show_oc.php?id=528459
Never empower an idiot with a response....
http://en.wikipedia.org/wiki/Troll_%28Internet%29
Seller/Buyer Reputation:
Heatware: http://www.heatware.com/eval.php?id=50905
Ebay: {Family Account} Kasyg3 http://myworld.ebay.com/kasyg3/
Ebay: {My personal Account} Sdumper http://myworld.ebay.com/sdumper/
iTrader: http://www.blazingpc.com/forum/itrader.php?u=28
I guess CPEV do it's work, am I right ?
Nice numbers.
Can You compare how many *C You gain after swap from modded tev to cpev (idle/load) ?
Does CPEV used with R14 needs frequent tuning ?
Regards
Peter
http://WWW.PIOTRES.COM
My productions (phase-change and containers) : Click here to see links...
Phase-change units, cascades, chillers and Ln2/DI containers builder - contact : piotres@piotres.com
i must say peter the cpev solution to my R14 problems is by far the bestI guess CPEV do it's work, am I right ?
Nice numbers
Can You compare how many *C You gain after swap from modded tev to cpev (idle/load) ?
Does CPEV used with R14 needs frequent tuning ?
Regards
Peter
and i do have a working cascade now @-122
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
Great job bazx!!You are an inspiration.
I'm guessing you used tes2 with 02 orifice on first stage and a tes2 with 00 (future change to 01) orifice on second with a cpev on third.
Was second stage a tes2? I know you said tev for r23, which a tes2 isn't.
hi ron
tevs used
TES 2 danfoss (02 orifice) R404,TEB2 danfoss (01 orifice) R23 (from Cold_ice), cpev R14(from piotres)
data on TEB 2
http://hr.refrignet.danfoss.com/RA/P...selectedTab=IN
cold_ice shop
http://www.kaeltetechnik-shop.at/Exp...-55C-Danfoss_1
i put the 01 in the TEB2 last night so will be vacuuming down today and testing
will let ya know how that went
Last edited by bazx; 03-21-2009 at 11:53 PM.
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
Any news on 01 orifice results for the TEB2?
Would you have still used the 02 orifice in the TES2 if you were using r507
Would you have still used the 02 orifice in the TES2 if you were using r507
yes i think i would ron
with the 02 orifice whist i have lost some temps with this one it has given me an us-shakeable 1st stage @ -37
the 01 is in the 2nd stage now which has lead to a rise in temp also -73 but again this is now very stable
the knock on effect of this has been an increase in high pressure in the 3rd stage to 15 bar @ full load with a temp of -125
the unit is now full stable at this temp @ around 250w
i would add that if i looked back i can see some things i would change
1. i would go for cpev on all stages tevs are good but have restricted my refrigerant choices
2.refrigerants: i would use/tryed the following instead of the one i have used
R402 or R507/R170/R14
imo opinion the above would have given me some slack on each stage
and would more then lightly held load on each stage @ lower temp
Last edited by bazx; 03-25-2009 at 10:56 AM.
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
Posting Permissions
Reply With Quote
is the remedy
Bookmarks