KOOLANCE FTW!! Im being serious.

**twwen2** · 03-24-2008, 10:53 PM

Loving these compression fittings, good to see them becoming more popular. Malik has the koolance ones in his build and they look HOT!
If i ever get enough $$$ to build a WC systems, it will most certainly have these in it

**otisthecat** · 03-24-2008, 10:59 PM

whats the part number for their sli brigde

**NaeKuh** · 03-24-2008, 11:15 PM

Originally Posted by otisthecat

whats the part number for their sli brigde

count your spacing inbetween

for 1 card spacing:
http://www.koolance.com/water-coolin...product_id=400

For 2 cards which i have:
http://www.koolance.com/water-coolin...product_id=434

and heavens forbid if you need three card spacing:
http://www.koolance.com/water-coolin...product_id=401

they got it all!

Ummm my X38 didnt have any problems reporting it. Why are they suposed to?

Originally Posted by Waterlogged

This "source" wouldn't be Victor....would it? Poor guy has taken quite a beating every time he shows up in here...regardless of what the OC's are. I feel bad for the guy but he does bring it on himself using the "bad" Koolance.

ahahahahahahha poor victor. i also remember all the bashing done in by the mob squad. :X But it looks like it payed off. They have a very interesting non alu south bridge block with swing nozzles in 45 degree arcs. Iany and i was eyeing it thinkn it might be interesting.

however they still havent ditched the stupid alu radiator, so i wouldnt recomend anything from them besides the fittings and maybe the 5 1/4reservoir/pump housing if your willing to shell out that much cash. :X

**LogAn'sRun** · 03-25-2008, 01:15 AM

Yeah the koolance are nice, but I like that BP's take the thicker wall, and that's comfort that I like.

**MrWizard6600** · 03-25-2008, 01:49 AM

great, the boards generally approve of these things, I was just about to post asking if their decent. Expect to see these guys on a nice totally parallel loop... in a few months

**DarthBeavis** · 03-25-2008, 07:13 AM

Originally Posted by Waterlogged

This "source" wouldn't be Victor....would it? Poor guy has taken quite a beating every time he shows up in here...regardless of what the OC's are. I feel bad for the guy but he does bring it on himself using the "bad" Koolance.

Man, I hope not.....I'll have to change my sig then.

If given a choice between Koolance or Bitspower compression fittings, I'd take the Koolance every time. I've got a pair of G1/4" 3/8"x1/2"(came with their DDC top) and a pair of 12mm 3/8"x1/2" (came with their flow meter) here that I'm not sure I'll ever use, but they are nice to have around in any event.

not Victor . . . .

**DarthBeavis** · 03-25-2008, 07:14 AM

Originally Posted by NaeKuh

however they still havent ditched the stupid alu radiator

Be patient. I can't say more . . .

**NaeKuh** · 03-25-2008, 08:27 AM

Originally Posted by DarthBeavis

Be patient. I can't say more . . .

oh dear lord.

the sky is falling

koolance definitely will get a

if they change that radiator.

**Waterlogged** · 03-25-2008, 09:01 AM

Originally Posted by NaeKuh

koolance definitely will get a

if they change that radiator.

While it would be a very good step forward for Koolance and liquid cooling, I'll reserve my

until I see numbers.

**smee** · 03-25-2008, 09:05 AM

Haha!!! I saw this thread and was like "ooooh dear" and then I said "NaeKuh posted this???!?!?!?" lol!!!!

for koolance compression fittings!!! They look hot!

Does anybody know if two of these will fit on an MCW30?

P.s. Naekuh..... wheres the worklog?????

**Maxx103** · 03-25-2008, 09:16 AM

So now that Koolance is getting away from our pal AL, and nickel plating the brass, does that mean the Koolance bashing is going to end?

**nikhsub1** · 03-25-2008, 09:19 AM

Originally Posted by NaeKuh

koolance definitely will get a

if they change that radiator.

Haha, but didn't they say it was WAY better than copper/brass rads?

My prediction is they do the 'Apple' type spin. I do like those fittings though... are they really $9.99 for ONE or is it a pair?

**Waterlogged** · 03-25-2008, 09:26 AM

Originally Posted by nikhsub1

Haha, but didn't they say it was WAY better than copper/brass rads?

My prediction is they do the 'Apple' type spin. I do like those fittings though... are they really $9.99 for ONE or is it a pair?

That's for a pair nik.

**NaeKuh** · 03-25-2008, 09:53 AM

LOL... i give them a thumbs up for the migratation effort. Never said anything about dropping it in my rig.

Of course im very into numbers. But its glad to see some companys are learning from there mistakes.

@ smee, i broke my bitspower T and right angles so the WIP is on hold until i get new koolance replacements. Dont get those acrylic things. Stick with the derlin DD's.

@ Scott, yeah its pretty cheap. If you consider the price for bitspower for 1, vs these guys, its not bad.

If you guys want any better pictures let me know. I took those at night under a florescent light. I'll try to take some in the sun if you want.

**dnb#** · 03-25-2008, 10:49 AM

I still hope the koolance factory explodes... Everything they make is just looking kinda cheap. And besides that, bitspower is more expensive so it's automaticly more pimp to have.

but afterall nice thread, will help many peeps I'm sure about that.

**Sparky** · 03-25-2008, 12:30 PM

uh...uhh......!!

all this sudden pro-koolance talk makes my head feel like it is going to explode!!

**~~Marvin_The_Martian~~** · 03-25-2008, 12:50 PM

Originally Posted by SparkyJJO

uh...uhh......!!

all this sudden pro-koolance talk makes my head feel like it is going to explode!!

I just feeling allot better about having bought a koolance case in the first place

**Eddie3dfx** · 03-25-2008, 12:52 PM

Koolance IT techs must ban this site on their companies computers

Not everything koolances makes is worthless, for example their

is really good

**~~Marvin_The_Martian~~** · 03-25-2008, 01:17 PM

Originally Posted by Eddie3dfx

Koolance IT techs must ban this site on their companies computers

Not everything koolances makes is worthless, for example their

is really good

Hey I bought a new pc3-720 about a year ago for €200, I needed a new case to so I think I got a reasonable deal all together. Though seeing air coolers have lower temps then me does hurt abit

**Zaskar** · 03-25-2008, 02:15 PM

Aww, they don't make 3/8" ID 5/8" OD fittings like Bitspower, that kinda bites (But hey, they got a wide selection of M12 thread compression fittings instead!)

Ahh well, their SLI bridge (that Bitspower doesn't make) connectors will work don't matter what size tubing you use, so thats still a bonus.

**NaeKuh** · 03-25-2008, 04:02 PM

Originally Posted by Zaskar

Aww, they don't make 3/8" ID 5/8" OD fittings like Bitspower, that kinda bites (But hey, they got a wide selection of M12 thread compression fittings instead!)

Ahh well, their SLI bridge (that Bitspower doesn't make) connectors will work don't matter what size tubing you use, so thats still a bonus.

Yeah your kinda stuck on that department.

The closest is 3/8ID 1/2OD.
http://www.koolance.com/water-coolin...product_id=397

Man, i just spent another 100 on koolance fittings. Gonna play with some more of there fittings. I'll post pics this friday when they arive. I even ordered some compression fittings to play around with. I dont like the CPC QuickDisconnects.

There big and super ugly. Id rather not have quick disconnects period.

Anyhow i think im gonna get uber flamed on friday.

**Zaskar** · 03-25-2008, 04:16 PM

Id really like to know how those coolance compression elbows are (their Swivel ones, think the only they make)

If you have to use an elbow in a tight spot (like on the bottom vid card in a tri SLI setup) I guess swivel would be useful, not to mention built in compression fitting.

Pub_Randy** · 03-25-2008, 08:56 PM

that SLI bridge looks a little restrictive? why did they give it such a thin neck?
I think Koolance FTW, wont be supported till they release some decent blocks, that perform as well as they look and aren't alu.

Fittings isn't exactly a huge achievement lol.

**Waterlogged** · 03-25-2008, 09:15 PM

Originally Posted by Pub_Randy**

that SLI bridge looks a little restrictive? why did they give it such a thin neck?
I think Koolance FTW, wont be supported till they release some decent blocks, that perform as well as they look and aren't alu.

Fittings isn't exactly a huge achievement lol.

It is however, a very large step in the right direction for them given their history, so they get a big

from me for this step. Mind you, the majority of the rest of their stuff is still crap though.

**iandh** · 03-25-2008, 09:46 PM

Originally Posted by Martinm210

Nice!

I like thier o-rings too, they are some sort of silicone and much more flexible. Even though I'm not a compression guy, it's nice to see some options. They make nice stuff once it's made in brass..

Yep.

Red O-ring = Silicone = No cracks for a long long time = no leaks = WIN.

I supplied Silicone O-rings with the short-lived "iandh" barbs. Unfortunately they are a bit touchy for non-captive fittings as they are considerably softer than the Buna-N type usually included with most commercial fittings. Silicone O-rings would squirt right out the side in the hands of some of the LC wrench monkeys I've encountered here and there.

Originally Posted by DarthBeavis

I bought one of their new pimpy USB HDD dohickeys . . .looks sweet with a Raptor X . . .now just need to get it air-brushed

These things are SWEET. I got one to replace the Tape backup at work (uuuughhh) and it has made life a joy.

Thread: KOOLANCE FTW!! Im being serious.

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions