KOOLANCE FTW!! Im being serious.

[NaeKuh]

WOAH!! b4 you guys start flaming me!!! Check out there new nozzles!

Koolance fittings is where im directing the FTW comment. The newer nozzles are pretty darn sweet, expecially there sli bridge and compression nozzle 13mm.

There not alu, its nickle platted brass. I guess koolance is finally learning. And there doing it pretty darn sweet.

These will fit 7/16ID 5/8OD tubing like masterkleer, or tygon.

Anyhow Bitspower, Eat your heart out:










The inside seems pretty darn good as well. The nozzle shortens as it hits the thread. Kinda like a real nozzle, not a straight pass.






Hehe... i actually can say that they made a pretty darn good product.

[afX]

I totally agree, the new koolance stuff isn't bad at all, I'm getting the ram-35 coolers, very sleek, no aluminum contact.

about these fittings are they sort of chamfered, so there is a smooth transition between diameters instead of a 90 degree wall?

edit: just read the post between the pics

[RAID]

nice! looks like they are painted black. does the color chip easily?

[NaeKuh]

nice! looks like they are painted black. does the color chip easily?

nickle plated.

And i wouldnt use a wrench too tight on them. But then again you dont ever want to overtighten a barb like that expecially on acrylic.

oh btw that motherboard shot is a sneak peak at my rebuild WIP. :T Under that Supreme is an insane QX. :T

Windows Stable, not Prime Stable. Look at Vcore

[Meatpuppet]

These will fit 7/16ID 5/8OD tubing like masterkleer, or tygon.

Is this speaking from experience or just by the numbers? I have been looking for compression fittings that fit this bill.

[Martinm210]

Nice!

I like thier o-rings too, they are some sort of silicone and much more flexible. Even though I'm not a compression guy, it's nice to see some options. They make nice stuff once it's made in brass..

[Snyxxx]

Can the SLI bridge be installed in situ (both cards already installed) or one-half put on each side of the card before installing onto the mobo?

I was just about to order a few to try out.

[Pedalmonkey]

im gona say the voltage on the CPU is insane for that clock Nae.

[RAID]

i doubt cpuz is reporting the vcore correctly with a 4GHz OC

[IanY]

Hehehehe Koolance

[NaeKuh]

@ meatpuppet: The product says 5/8OD, i did try and slip a masterkleer over it and it does indeed fit.

http://www.koolance.com/water-coolin...product_id=399

@Synxx: yes you can install the cards insitu. The bottom part swivles so to speak.

@Raid: i double checked it with CPU-Z 1.42 and it reported the same voltage. If its a voltage error its usually 1.1### bios settings confirmed it was booting at that voltage cuz i set it at 1.3V on my DFI. RAID you have any pics to your torcher rack? I need to rebuild mine, and andy's is too complicated. :X

@Iany: HEH yeah i did it.

[Kayin]

I agree, the Koolance compressions are great, I've got some I'm putting in Mithril...

[NaeKuh]

I agree, the Koolance compressions are great, I've got some I'm putting in Mithril...

your artwork is simply amazing on that thing.

[Kayin]

I know everyone's dying to see what I do next. I promise I won't disappont.

/end threadjack. remember bro, I've had those compressions a long time. Nobody had to convert me about how good they are. I had them a year ago. Course, I run 3/8" 1/2"-compressions are a natural fit for that. I've always preferred them, it's just I can't use them throughout this time because of "special" problems-but you'll see why soon enough...

[Canadmos]

They look great.

Is your first video card bending?

[tiro_uspsss]

"KOOLANCE FTW!! Im being serious."

mod sees title:

* 'oh - there is gonna be SO much flaming in here..' /click *

*aahhh, pheeeeeeeww*

[dinos22]

lol love the title

hency why you're going to get flamed now





sorry had to post this one

[tiro_uspsss]

lol love the title

hency why you're going to get flamed now





sorry had to post this one

[DarthBeavis]

I have a source close to Koolance who says they are massively moving away from aluminum . . .in ALL areas This person advises them on what we (meaning you and I) want . . .looks like my nagging him about aluminum may have paid off

[yonton228]

I have a source close to Koolance who says they are massively moving away from aluminum . . .in ALL areas This person advises them on what we (meaning you and I) want . . .looks like my nagging him about aluminum may have paid off

-yonton228/timmy

[NaeKuh]

I have a source close to Koolance who says they are massively moving away from aluminum . . .in ALL areas This person advises them on what we (meaning you and I) want . . .looks like my nagging him about aluminum may have paid off

LOL i have nothing against bling when your performance area i met!

These fittings sure look like they fit both catigories. And i dont discriminate against companys just bad parts! :P

If koolance makes good stuff, hell, its going in my system.

XSPC is showing there migration also. There making some sound products. Koolance has some nice chipset blocks. Ive been talking them over with iany.

Whose next Thermaltake??

They look great.

Is your first video card bending?

Blocks dont sit right with the pads. And if i remove the bads, some of the memory doesnt sit flat on the blocks. :shurg:

You know of a way to fix this? im all ears if you do.

[DarthBeavis]

Whose next Thermaltake??
.

I bought one of their new pimpy USB HDD dohickeys . . .looks sweet with a Raptor X . . .now just need to get it air-brushed

[Kayin]

sheet of glass and sandpaper? I'm not sure, pics would help me tell you...

This coming from a man who's seriously not afraid of Dremel block surgery, though...

[Waterlogged]

I have a source close to Koolance who says they are massively moving away from aluminum . . .in ALL areas This person advises them on what we (meaning you and I) want . . .looks like my nagging him about aluminum may have paid off

This "source" wouldn't be Victor....would it? Poor guy has taken quite a beating every time he shows up in here...regardless of what the OC's are. I feel bad for the guy but he does bring it on himself using the "bad" Koolance.

LOL i have nothing against bling when your performance area i met!

These fittings sure look like they fit both catigories. And i dont discriminate against companys just bad parts! :P

If koolance makes good stuff, hell, its going in my system.

XSPC is showing there migration also. There making some sound products. Koolance has some nice chipset blocks. Ive been talking them over with iany.

Whose next Thermaltake??



Blocks dont sit right with the pads. And if i remove the bads, some of the memory doesnt sit flat on the blocks. :shurg:

You know of a way to fix this? im all ears if you do.

Man, I hope not.....I'll have to change my sig then.

If given a choice between Koolance or Bitspower compression fittings, I'd take the Koolance every time. I've got a pair of G1/4" 3/8"x1/2"(came with their DDC top) and a pair of 12mm 3/8"x1/2" (came with their flow meter) here that I'm not sure I'll ever use, but they are nice to have around in any event.

[ColonelCain]

It is about time. Seriously about time. Hmm... that might come in handy to know actually...

[THREADJACK] Real quaick NaeKuh, does your x38 report to CPU-Z the CPU frequencey incorrectly?
[/ENDTHREADJACK]