E6600 L647g425

[Boogotop]

just got E6600 L647G425

first time i see a G stepping

Orthos stable 3600Mhz @1.45v
FSB wall around 505

I'll do more test and keep you updated....seen to be a nice candidate for the next dryice run

[Nmbr1Ballr]

Nice, how are the temperatures?

[Boogotop]

Nice, how are the temperatures?

TAT give me around 50celcius and Asus Probe around 58celcius both @ full load

can't test coretemp....i run on Vista...tommorow i will install XP SP2 to make some test

[Supertim0r]

nice chip

core temp 0.95 work on Vista

[cadaveca]

SL9ZL?

60.1°C
1.187V-1.325V

[MarlboroMan]

SL9ZL?

60.1°C
1.187V-1.325V

yeah, its a higher voltage CPU... don't know, lets see if this CPU can overclock aswell as SL9S8 witch is 0.850V-1.3525V


http://processorfinder.intel.com/det...px?sSpec=SL9ZL

[Boogotop]

3600mhz @ 1.45v Idle and full load....little bit confuse about the real temp

[cadaveca]

I tihnk that it seems right. seem like they have done something to cpu so that it only draws maximum power rating @ voltage designated in COreTemp. A listing of Vdroop using digimeter to PWM might be usefull...

[mascaras]

Not BAD , i think !!




my E6600 L628B runs Orthos at 3600mhz @ 1.33v (watercooled)








and boot form bios 540 fsb 1:1 (didnt try more)










but with aircooling its a litle HOT .



But your Chips looks nice , we are waiting for dry ice results then




regards

[911us]

@Boogotop :

any blend test stable pic ?...I have the same spec with you but I can't get blend test stable >3hr.

@mascaras: can you show me your core temp ?...

[Boogotop]

@Boogotop :

any blend test stable pic ?...I have the same spec with you but I can't get blend test stable >3hr.

no...just tried small...next night i will do blend and post screen

[mascaras]

@Boogotop :

any blend test stable pic ?...I have the same spec with you but I can't get blend test stable >3hr.

@mascaras: can you show me your core temp ?...

the temps with coretemp are a litle lower than with TAT







regards

[Solarfall]

the temps with coretemp are a litle lower than with TAT







regards

dude what are u using for that chip, those temps are pretty cool ....TEC mayby ?

[Boogotop]

@Boogotop :

any blend test stable pic ?...I have the same spec with you but I can't get blend test stable >3hr.

[mascaras]

dude what are u using for that chip, those temps are pretty cool ....TEC mayby ?

150€ watercooling Kit


- CPU: NexXxos XP Silver
- Radiator :Airplex Evo 240mm ou Black Ice Stealth
- Pump :Eheim S1000 Station
- Fans : 2x Enermax Double Ball Beraing 120mm

[Solarfall]

well it's cpu only kind of loop so that explanes the low temps, i watercool my 8800gtx too, and it's in the same loop with my cpu.

let me guess you live in europe, very german kind of loop, not saying it's a bad thing, just an observation i've made over the years while i've been into computers. small diameter tubing, restrictive rads.. etc

btw have the same block( retired) and rad (second rad in my rig)

[mascaras]

yep i live in portugal

i prefer small diameter tubes like 8/6 than 10/8 or higher

when i had C2D E6400 and X1950XT with same wc kit on same loop i had pretty much same temps









Now im only watercooling the CPU beecause 8800GTS stokcooler dont make much noise and its eficient (45c Idle)









regards

[PanteraGSTK]

This is a newer e6600 right? I'm considering getting one, but have read the newer chips don't clock all that well. What do you guys think?

[Solarfall]

This is a newer e6600 right? I'm considering getting one, but have read the newer chips don't clock all that well. What do you guys think?

yes this really seems to be the case with these newer C2D chips.

[mascaras]

This is a newer e6600 right? I'm considering getting one, but have read the newer chips don't clock all that well. What do you guys think?

well the first E6600 CHips ( week 24 & week 25) were A LOT WORSE , some of them dont even run 3400mhz (no matter what voltage used) , for what i see here at least this new ones run 3600mzh@1.45v Orthos stable , i think its not so bad !!

[911us]

the temps with coretemp are a litle lower than with TAT







regards

your VID is really good,just 1.23v.I think that is why you can go high without using a lot of voltage.

[911us]

Nice !...I can't even do it for 4 hr+.Can you tell me your bios voltage settings ?..

Mine is:


_Vcore : 1.4725v (1.44 v real) 6600 week 37A@3600Mhz (400*9) on watercool
_VFSB : 1.35v
_VNB : 1.35v
_VDIMM : 2v (OCZ Flex @800 4-4-4-12 4 30 10 10 10 11)
_All VDEF DDRII : AUTO
_VSB (SATA,PCI-E) : 1.6v
_VSB : 1.075v



I thought it is cause of the board.Something wrong with my commando.

[Solarfall]

911us my guess is that you have found the limits of your cpu and thats why you are not able to make your system stable.

[911us]

911us my guess is that you have found the limits of your cpu and thats why you are not able to make your system stable.

The limit stability is about 37xx Mhz on watercool. I am doing fine with orthos large test at 3600Mhz but not the blend test.

[Boogotop]

i can run 3dmark 2k1 @3925mhz 1.6v and sreen @ 4GHZ on this new 6600 L647G....not bad....o/c more than my L637A and approx same as my L629B