Liquid Cooling Case Gallery

[xFEARx3]

[coolhandluke41]

@xFEARx3 can you please post some load temps .
I'm very curious what kind of temps are you getting from your LT
Thanks

[xFEARx3]

@xFEARx3 can you please post some load temps .
I'm very curious what kind of temps are you getting from your LT
Thanks

Temps are:

3x GTX 580 between 47°C and 41°C (max. 43°C @ COD4).

i7 980X @ 4,2 Ghz under 50°

Rads: Phobya 420 @ 800rpm + Mora 3 @ 780rpm

[felix_w]

Temps are:

3x GTX 580 between 47°C and 41°C (max. 43°C @ COD4).

i7 980X @ 4,2 Ghz under 50°

Rads: Phobya 420 @ 800rpm + Mora 3 @ 780rpm

Very nice

I'm thinking of doing the same with my next w/c setup...external rad, but moving it outside the room...

How do you power the 4 fans of you rad ?

[SkItZo]

My old STC-T01 dual loop system was almost 29kg, THAT sucked to try to move.
Now im down to a single loop in it and it still weighs damned near 27kg

[felix_w]

We like it (except the colour of the hold-down plate of your cpu-block and your blocks top, seems to have some colour mismatch with the rest)

but rules say about 4 pics maximum per user...so i think you have to edit your post mate...choose the best...

EDIT : nice res...

[theseeker]

We like it (except the colour of the hold-down plate of your cpu-block and your blocks top, seems to have some colour mismatch with the rest)

but rules say about 4 pics maximum per user...so i think you have to edit your post mate...choose the best...

EDIT : nice res...

Well put.

[coolhandluke41]

Thanks xFEARx3,very clean and great temps,didn't know you wore running Phobya 420 as well
very nice rig

[xFEARx3]

Very nice

I'm thinking of doing the same with my next w/c setup...external rad, but moving it outside the room...

How do you power the 4 fans of you rad ?

I made a extra long fan cable. Here it is:





The fans are powered by an Aquacomputer Poweradjust 2.

Thanks xFEARx3,very clean and great temps,didn't know you wore running Phobya 420 as well
very nice rig

Yes, but i will replace it with a 280 to have more space for HDD etc.

[bleucharm28]

I just added new stuff to my existing WC PC. I took these pictures from my camera phone.

GTX 580 HC2
XSPC 240 at bottom of the case. (no pictures, too lazy)
Fesser Black tubing 3/4 inch
EK Supreme Nickel

[Irocing]

Hi,

Alot of real nice looking setups here.

Mine on the cheap and almost done. Sheetmetal cut out for the top Rad
and the Senic Cruiser look last to do.

Ivy going in here when its released along with single 6990 on water.
No mo CF

Pics

Later

[Barr3l Rid3r]

Hi,

Alot of real nice looking setups here.

Mine on the cheap and almost done. Sheetmetal cut out for the top Rad
and the Senic Cruiser look last to do.

Ivy going in here when its released along with single 6990 on water.
No mo CF

Pics

Later

nice CM Rulez

here goes mine:

[Irocing]

nice CM Rulez

here goes mine:

http://i53.tinypic.com/e7zayo.jpg

Like what you did with the stock side panel.

Heineken

Old Twister here.
Only way can afford this stuff.

Later

[Barr3l Rid3r]

Like what you did with the stock side panel.

Heineken

Old Twister here.
Only way can afford this stuff.

Later

Heineken is good, about US$ 1,10 at local market, I thing I haven't tried Old Twister. I did have lots of draft in NZ

Project: ReKae

Pretty pero inefficient.

[coolhandluke41]

@Irocing..nice woodwork

[Irocing]

@Irocing..nice woodwork

Hi,

Agree, Shoddy

Just bought new home and new computer room.

Is this better

Later
Pics

[coolhandluke41]

@xFEARx3 i was wondering what kind of temps you would get from running just LT with that set up

[xFEARx3]

LT... hmmm??

[coolhandluke41]

LT... hmmm??

this is what you have right?
Watercool MO-RA3 4x180 LT ?

[xFEARx3]

Ahhh.. I have the pro Edition. But without the 420, there would be ~2° difference.

[coolhandluke41]

Ahhh.. I have the pro Edition. But without the 420, there would be ~2° difference.

nice , i know it's a great RAD it just doesn't get much respect here in the states
Thanks

[H2lium]

xFEARx3, awesome setup,

could you just tell us what liquid you are using?

the blue color is awesome !

also what kind of tygon tubing you are using?

Thanks..

[coolmiester]

System Spec:
Coolermaster ATCs 840 Chassis x2
Intel X5650's
EVGA SR-2 Motherboard
EVGA GTX480 Hydro Copper FTW (4 way Sli)
12GB Crucial RAM
Kingston 64GB SSD's
Coolermaster Silent Pro Gold 1200w PSU

Watercooling Spec:
MIPS MB and RAM Freezer Blocks
Watercool HK3 CPU Blocks
Bitspower Carbon Black fittings
Phobya Radiators (2x 480 & 2x 240)
Koolance RP-450X2 Bay-Res x2
Laing D5 Pumps x3

[Lu(ky]

coolmiester I think this one is far your best work... Outstanding mod skills you have, I just wish you were my next door neighbor so I can watch your mad skills in person..

[NaeKuh]

coolmiester I think this one is far your best work... Outstanding mod skills you have, I just wish you were my next door neighbor so I can watch your mad skills in person..

his yamaha one was also speechless..

@jun i love those ties and how u arranged it... i think i might do something simular to that in my corners.
at any rate u gave me some ideas in how to clean up my mess i have.