Workstation
P5E3 Deluxe
Q9650 @4.0GHz (L826A974)
Intel X25-M 80Gb(Win7 x64)-Samsung MLC64 -WD500
8Gb Crucial Value D9JNM
GTX 260& Eizo L768
CobaNitrox 600w
WC (Laing DDC1T-Enzotech cpublock-B/Ice Stealth 360)
TT Armor
Gaming Rig: i7-5930k @ 4.5Ghz, EVGA x99 Classified, 32GB DDR4 2400Mhz, x2 PNY C1311 256GB SSD, x2 840EVO 1TB SSD, x6 2TB WD Blacks, EVGA GTX1080 CS, Corsair AX860, X3 Dell 27" Monitors
Car: 2008 Ford Crown Victoria Police Interceptor.
Car 2: 2018 Ford Edge Titanium V6.
This 5 GHz q9650 club.. the efforts in taming the heat this thing spits out at load.. very nice.
I have an interesting time air-cooling this chip's 4 Ghz prime95 runs.
I suppose real overclocking begins with real cooling, hunh?
XmX
As i said before I run my Q9650 at 4428mhz now (492x9) @ 1.4v on a 620w PSU which is only doing 12.03v on the 12v rail
On a rampage extreme too
Just bumped it one nudge to 1.4v from spec in sig
EDIT: From what everyone is saying in this thread it sounds like I am EXTREMELY lucky to have this clock, on this mobo, with this PSU![]()
Last edited by PaulyD; 04-23-2009 at 07:16 AM.
i5-2500k @ 4.6ghz | Z68X-UD3H-Gen3 | 8GB Ram | EVGA HD GTX570
After a lot of effort I got my system stable @ 4000 (445*9)
PLL = 1.50
VTT = 1.34
VCore = 1.40 (LLC disabled, load = 1.28V).
Mem @ 1068 5-5-5-18 2.1V
Rest on AUTO.
- System is prime blend 8h stable
- Linpack 50 runs stable
- Memtest 8 hour stable
However, 3Dmark06 gives an instant crash and also 3Dmark01 crashes after 2 runs.
How to overcome these errors, more MCH? MCH at auto = 1.20
Anyone have any templates I can use for getting past 3.0Ghz on my EVGA 750i FTW?
I can post at 3.6Ghz, but I keep BSOD'ing or getting core errors on OCCT.
I set my BIOS to 1600FSB and Vcore to 1.28, trying 1.3v now. Everything else on the BIOS Voltages are set to AUTO and I have my RAM synced to my FSB.
System specs:
Motherboard: EVGA 750i FTW
CPU Cooler: ZEROtherm Nirvana NV120
RAM: 4GB OCZ ReaperX
Video Cards: Nvidia GTX 260's in SLI
Monitor: Acer P243W 24"
Power Supply: Ultra X3 1000w
^ get an ep45 if you want to really oc your q9650
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
and watercooled.. thats lucky ?
if you guys want lucky.. heres lucky: http://www.xtremesystems.org/forums/...d.php?t=206237 4.8ghz - all air cooled
if id want to watercool.. 4.8ghz fully stable easy peasy![]()
Last edited by NapalmV5; 04-23-2009 at 02:31 PM.
Gaming Rig: i7-5930k @ 4.5Ghz, EVGA x99 Classified, 32GB DDR4 2400Mhz, x2 PNY C1311 256GB SSD, x2 840EVO 1TB SSD, x6 2TB WD Blacks, EVGA GTX1080 CS, Corsair AX860, X3 Dell 27" Monitors
Car: 2008 Ford Crown Victoria Police Interceptor.
Car 2: 2018 Ford Edge Titanium V6.
I like SLI, it does generate too much heat, but resale value of my GTX 260's are too low now.
I would get that board in a heartbeat if I didn't run SLI' but I went the gaming power route I guess.
I've upped my Vcore all the way up to 1.3125 which will be the furthest I will go, and it still fails OCCT. This makes no sense at all! I'm peaking the 70C mark too.
I just want to hit the magical 3.6Ghz.
I was able to go from 2.4Ghz to 3.0Ghz on my old Q6600 w/ upping the Vcore a notch and ran rock stable. I do the same here I Blue Screen... wtf.
Nice nice nice !!!
I2I3 Impacta OC Team
http://hard1xtreme.wordpress.com/
My Hwbot Points
i7 860 @ 4.4Ghz - TRUE COPPER - Evga Classified 200 - 4GB Mushkin 1.7Ghz cas6 - 2x SSD WD Silicom 128GB Raid0 - GTX 580 0.95Ghz - Rec Cougar 1000W - CM ACTS 840
i7 2600K @ 4.6Ghz - H70 @ 150CFM - Gigabyte P67A - UD7 - 16GB RipjawsX 2133Mhz Cas9 - 2TB Raid1 - 1.25TB - XFX 8400GS - Corsair HX 1000W - G15 - Razer 2000DPI - Philips HT3365X - TT Armor Modded
Not sure what to tell you with that 750i there. and why is 1.31 your limit. that is stupid. When Intel says the limit for vcore is 1.36 and that is just them being EXTRA Cautious. when really we can run these Q9650's at 1.4v all day!
Also nas, I think part of your problem is that ghetto Nirvana cooler, you have one of the best s775 CPU's on the market. that was a pretty penny to buy, yet you have a $25.99 cooler on it. I'd suggest you get a TRUE, or a S-1283, or a Cooler Master V8 on that thing. and then you'll be better. OCCT fails with anything over 62c. (That was OCCT's Default when I installed it on my system). so that could be why.
my 750i was only able to take my Q6700 to 3.66 Ghz. but my 750i got my Q9650 to 3.8 Ghz my FIRST time. and 4.0 Ghz was just a few voltage clicks higher. I've done 3DMark06 runs at 4.3 Ghz also. but not stable. but then I've never went over 1.38 on vcore either.. but that is because I live in a desert and didn't have water. but now I'm running water, and I change my voltage all the time.![]()
Project HAF 932 Water-Cooled
__________________
New OC Validation
- Q9650 4.0 Ghz For Now -
- GTZ, Feser 360, D5 Vario, EK Multi-Option -
- eVGA 750i FTW! -
- eVGA GTX 480 H20 & GTX 295 -
- 2x2GB Dominators PC2-8500C5D -
- WDCaviar Black 640GB AALS x2 (Raid0) -
- FreeAgent Pro 500GB Ext x2 -
- Enermax Revolution 85+ 1050w PSU -
- X-Fi XtremeGamer -
- CM HAF 932 H20 -
- Dell U2410 IPS LCD-
- Logitech G11 & MX-518 /G9 -
- Sony 24x Optical w/ LightScribe -
- BOSE Companion 3 -
- ATH-AD900 Cans & UE Triple.Fi 10 Custom IEM's -
- Nikon D40 w/18-105mm & 55-200mm VR's -
Also, I was wondering if everyone here on this thread would post there current 24/7 vcore for there Q9650's. Also post your Max vcore if you'd like. but what I'm looking for is a list of 24/7 vcore's that people have run, and possibly for how long. I think these Q9650's have a vcore limit close to 1.5v just like the Q6600's and just like Nehalem, since i7 recommended vcore limit is 1.5v and they are made using the same 45nm High-K chips as Yorkfield and other 45nm chips.
So ya, can you guys post your 24/7 vcore on your Q9650's please. I'll go first.
I've been running 1.33 in BIOS, 1.312v CPU-Z at 4.0 Ghz for about 7 months now.
Sorry for Double post!
Project HAF 932 Water-Cooled
__________________
New OC Validation
- Q9650 4.0 Ghz For Now -
- GTZ, Feser 360, D5 Vario, EK Multi-Option -
- eVGA 750i FTW! -
- eVGA GTX 480 H20 & GTX 295 -
- 2x2GB Dominators PC2-8500C5D -
- WDCaviar Black 640GB AALS x2 (Raid0) -
- FreeAgent Pro 500GB Ext x2 -
- Enermax Revolution 85+ 1050w PSU -
- X-Fi XtremeGamer -
- CM HAF 932 H20 -
- Dell U2410 IPS LCD-
- Logitech G11 & MX-518 /G9 -
- Sony 24x Optical w/ LightScribe -
- BOSE Companion 3 -
- ATH-AD900 Cans & UE Triple.Fi 10 Custom IEM's -
- Nikon D40 w/18-105mm & 55-200mm VR's -
^ 24/7: believe it or not 4.6ghz on air/thermalright ifx14/ep45-extreme
and no such thing as 1.5vcore limit![]()
heres how fast q9650 is @ 4.6
![]()
I'm not saying 1.5v is the limit.. I'm saying that is Intel's recommended limit. These chips have NO limit. it's as high as the user wants or dares.
what is the highest 24/7 vcore you used Napalm for longer than a month or 2.. Your saying your 24/7 is 4.6 Ghz... awesome. at what vcore??
oh and nice to see you around here again. I owe my 4.3 Ghz clocks to you for ur help and good info.. Thanks Man!
Project HAF 932 Water-Cooled
__________________
New OC Validation
- Q9650 4.0 Ghz For Now -
- GTZ, Feser 360, D5 Vario, EK Multi-Option -
- eVGA 750i FTW! -
- eVGA GTX 480 H20 & GTX 295 -
- 2x2GB Dominators PC2-8500C5D -
- WDCaviar Black 640GB AALS x2 (Raid0) -
- FreeAgent Pro 500GB Ext x2 -
- Enermax Revolution 85+ 1050w PSU -
- X-Fi XtremeGamer -
- CM HAF 932 H20 -
- Dell U2410 IPS LCD-
- Logitech G11 & MX-518 /G9 -
- Sony 24x Optical w/ LightScribe -
- BOSE Companion 3 -
- ATH-AD900 Cans & UE Triple.Fi 10 Custom IEM's -
- Nikon D40 w/18-105mm & 55-200mm VR's -
ive been running these voltages since last year
the 1.2125vider @ 1.58vcore @ bios
the 1.2500vider @ 1.60vcore @ bios
whos got the balls to run that?
so many inquire about vcore yet only so few got the balls!![]()
Last edited by NapalmV5; 04-23-2009 at 11:39 PM.
@ idle/@ bios ^
![]()
Last edited by NapalmV5; 04-23-2009 at 11:37 PM.
and heres why i got to run it ~1.6vcore
video - this beast draws a whole lot of juice
sound - this beast draws a whole lot of juice
+ areca raid/2x ssd
if it wouldnt be for all that ^ no need for 1.6vcore.. 1.5 would do
Last edited by NapalmV5; 04-23-2009 at 11:37 PM.
Absolute maximum for Core and FSB termination voltage - 1.45v. From Intel® Core™2 Extreme Processor QX9000¹ Series and Intel® Core™2 Quad Processor Q9000¹, Q9000S¹, Q8000¹ and Q8000S¹ Series Datasheet
My Q9450 worked at 1.525v very well for a few months![]()
MB: Gigabyte EP45-UD3P
CPU: Q9650
RAM: G.Skill 4GB Kit F2-8000CL5D-4GBPQ and 2x1GB Crucial (1200MHz/2.22v)
PSU: Antec TPQ-850
Storage: 2x250GB Seagate SATA (RAID1 on ICH10R), 200GB Seagate SATA, 320GB WD SATA, 4x147GB 15k Hitachi SAS (RAID5 on LSI MegaRAID SAS 8888ELP aka Intel SRCSASJV)
Case: Cooler Master Stacker STC-T01 (with two 4-in-3 Device Module)
VGA: Zotac GTX260^2 (216 core, ZT-X26E3KB-FSP)
Liquid Cooling System:
CPU: Enzotech Water Block SCW-1 Rev.A Sapphire
Pump: Laing DDC-1T with top XSPC Laing DDC reservoir
Radiator: XSPC RX480 + 4xZalman F3
[SIGPIC][/SIGPIC]
my q9650s have been running @ 1.55-1.60vcore/1.60-1.66vtt on air since last year
benched my 1.2125vider @ 1.8vtt/534fsb for quite some time.. still runs it
Last edited by NapalmV5; 04-23-2009 at 11:45 PM.
On my mobo VTT limit is 1.7v
I feel i can do more than 5004Hz, but VTT prevents me from it![]()
MB: Gigabyte EP45-UD3P
CPU: Q9650
RAM: G.Skill 4GB Kit F2-8000CL5D-4GBPQ and 2x1GB Crucial (1200MHz/2.22v)
PSU: Antec TPQ-850
Storage: 2x250GB Seagate SATA (RAID1 on ICH10R), 200GB Seagate SATA, 320GB WD SATA, 4x147GB 15k Hitachi SAS (RAID5 on LSI MegaRAID SAS 8888ELP aka Intel SRCSASJV)
Case: Cooler Master Stacker STC-T01 (with two 4-in-3 Device Module)
VGA: Zotac GTX260^2 (216 core, ZT-X26E3KB-FSP)
Liquid Cooling System:
CPU: Enzotech Water Block SCW-1 Rev.A Sapphire
Pump: Laing DDC-1T with top XSPC Laing DDC reservoir
Radiator: XSPC RX480 + 4xZalman F3
[SIGPIC][/SIGPIC]
i5 2500K @ 4.9GHz+ 8GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 6 Asus P8P67 Pro CrossFire 6970's @ 950/1450
Xeon X5677 @ 4.5Ghz 6GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 7 Gigabyte EX58-UD5 4870x2
i7-880 @ 4.2Ghz+ (still playing) 4GB G-Skill RipJaws DDR3-2000 @2300Mhz CAS 9 Asus Maximus III Formula MSI Hawk 5770
Bookmarks