[Test Report] Powercolor HD4870X2

[mascaras]

i was thinking about temps too low while running atitool (very strange)

so i decided run AMDGPUTool which report temps while playing and with the right 3d clocks & Voltages !

i found that temps are higher compared with temps running Atitool (because atitool are running with 2D clocks & Voltages )




Temps with AMDGPUTool



Automatic FAN (27%)
Playing Cod 4


ASIC Temperature via internal TSS [0] (C) = 93.5º (core0)
ASIC Temperature via internal TSS [1] (C) = 73.5º (core1)


MCLK(MHz)[0] = 900, SCLK(MHz)[0] = 750 ( memory/core 0 clocks )
MCLK(MHz)[1] = 900, SCLK(MHz)[1] = 750 ( memory/core 1 clocks )



----------------------------



Manual Fan Speed = 40%
Playing Grid


00:41:17

ASIC Temperature via internal TSS [0] (C) = 72º (core 0)
ASIC Temperature via internal TSS [1] (C) = 61.5º (core 1)

MCLK(MHz)[0] = 900,SCLK(MHz)[0] = 750 ( memory/core 0 clocks )
MCLK(MHz)[1] = 900 , SCLK(MHz)[1] = 750 ( memory/core 1 clocks )

[cakofony]

Do you know if there is any microstuttering? I read a few reviews early on that said it was eliminated, then a friend (who is stuck in the step up program, thus biased) linked me to one that said it stutters. I realize it's almost impossible to completely eliminate micro-stuttering, it can be drastically minimized to an extent that the human eye cannot tell the difference. Does anybody know if they have they fixed it?

[mascaras]

Do you know if there is any microstuttering? I read a few reviews early on that said it was eliminated, then a friend (who is stuck in the step up program, thus biased) linked me to one that said it stutters. I realize it's almost impossible to completely eliminate micro-stuttering, it can be drastically minimized to an extent that the human eye cannot tell the difference. Does anybody know if they have they fixed it?

only the usual mini breaks in crysis when Saving Game , Big explosions , etc , there is no stutering like 3870X2 @ Big FPS drops !


Grid runs OK

Cod4 runs OK



added Grid SS "in game"


regards