Results 1 to 25 of 6110

Thread: "ASUS P5Q Deluxe discussion".

Threaded View

  1. #10
    Registered User
    Join Date
    Aug 2008
    Location
    Canada
    Posts
    61

    My Bios Settings

    Processor Q9450
    RAM Corsair Dominator 8500 4x2GB
    Asus P5Q Deluxe
    Vista x64

    My original core vis is 1.15 and 1.25 at x6 and x8, according to Everest/CPUz

    Rather than clog up the board, I'll edit this post for my current overclock settings. I had some problems trying lower settings and bioses, and this is what I came up with

    BIOS 803
    (tested stable prime95 6hrs large & then 8hrs small, no issues)


    *Edited 15th OCtober for 1406 bios and new settings gleaned from the thread - thanks all!

    *now using 2201, no problems

    AI TWEAKER:
    AI Tweaker:
    Ai overclock: manual
    CPU ratio setting: auto
    FSB frequency: 450
    PCIE freq: 100
    FSB strap to NB: Auto
    DRAM freq: Auto
    everything Auto then
    DRAM timing, Manual 5-5-5-15
    DRAM static : Auto
    DRAM read training: Auto
    MEM OC charger: Auto
    Ai Clock Twister: Auto
    Ai Transaction booster: Auto
    Common Performance level: Auto
    Pull ins all set: disabled

    CPU Voltage: 1.35 (This is high relative to other users but my chip need it)

    CPU GTL Voltage Reference (0/2): 0.63
    CPU GTL (1/3): 0.63
    CPU PLL: 1.54
    FSB Termination: 1.22
    DRAM: 2.02
    NB Voltage: 1.28
    NB GTL Reference: Auto
    SB Voltage: 1.20
    PCIE Sata voltage: 1.50

    Load line Calibration: Enabled
    CPU spread: disabled
    PCIE spread: disabled
    CPU clock Skew: Auto
    NB clock skew: Auto
    CPU Margin Enhancement: Performance mode

    Next page: Advanced: CPU Configuration
    CPU Ratio Setting: Auto
    C1E Support: Enabled
    Max CPUID Value Limit: Disabled
    Intel Virtualization: Disabled
    CPU TM: Disabled
    Execute Disable bit: Disabled
    Intel Speed Step: Enabled

    and that's it, 3.6 stable

    Air cooling, thermalright IFX-14 (without the backplate cooler as it was shorting on the P182 case). I a Noctua on IFX and inplace of case fans

    Real temp under prime showing ~61deg C on one core rest ~56deg C

    When I tried >3.6 it gets unstable and so after reading around, happy with settling for 3.6 with speedstep for 24/7
    Stability is important to me - I upped the vcore from 1.33 to keep stable. Temps are okay.

    Thanks to Luicis et al with the Q9450/P5Q combination on this thread and the other under Q9450
    Last edited by mac_69; 07-29-2009 at 03:09 AM. Reason: Updated settings 14th August
    P5QDeluxe Q9450 @3.6 8GB Corsair Dominator 8500
    Current AI settings: http://www.xtremesystems.org/forums/...postcount=2459

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •