DFI Lanparty LT X48-T2R
Intel Q6600 L737B242 ~ VID 1.2125 ~ 4000mhZ @ 1.48 vcore {lapped}
eVGA 8800GTS (G92) 512MB {stock}
Crucial Ballistix PC8500 Tracer ~ 1200mhZ 5-5-5-12 @ 2.05v
Lian Li PC-V1000 {modded}
Corsair HX 620W
Creative X-FI ExtremeMusic
Western Digital Raptor X 150GB
Thermalright-Ultra120 Xtreme {lapped} ft. Scythe S-Flex SFF21F S-FDB ~ Push & Pull
Enable = enables the circuitry that controls the Intel specification vdroop, so you will get vdroop.
Disable = opposite to above.
If it ain't watercooled, I don't wanna know.
Why does this thread have four stars? Six pages and nothing of relevance so far pertaining to the board. Most of the posts need to be deleted and the thread brought back on topic as to what the title suggests.
QX 9650 5ghz with 1.55v 4.8ghz with 1.5v 24/7 in a VAPOLI V-2000B+ Single stage phase cooling.
DFI LP LT X-38 T2R
2X HD4850's water cooled , volt modded
Thermaltake 1KW Psu
4x Seagate 250GB in RAID 0
8GB crucial ballistix ram
Just got my board in yesterday.
Setup:
Q6600 G0
Patriot PC5300 LLK (2x1GB)
2 x HIS 2900Pro
Corsair 620HX
What I've found so far:
- This board has 2 floppy connectors to give extra voltage to the board vs. the one my P965-S had. Connecting only one of them made the board get stuck with a C1 error but no beep even with no RAM. Connecting both or none let me get past that.
- This board doesn't like my Patriot PC5300 LLK's any more than my P965-S
So I still have to boot with one stick, up the voltages, set timings, etc before putting in the second stick. 4 sticks errors on memtest at stock whereas I could get my P965-S to use them with a little work.
- There's a difference in what you set the RAM voltage to to what the BIOS reports it's set at. E.G. 1.904 in BIOS reads 1.84 in Hardware Monitor.
- Long video cards make it hard to change the RAM
- Upping the CPU voltage so far makes my computer go through a attempt-to-post - reboot - attempt-to-post loop.
- The 8-pin power cable is in the upper left corner, so don't put it in an Antec P180 unless you don't mind messy cables
So far I can only run the CPU at stock since I can't up the voltage or overclock much at all. Hopefully there will be some other Q6600 users with this board that can help me out.
EDIT: Figured out my problem. I'm currently at the same overclock I had with my P965-s with less voltage all around. Haven't tried for more, but will soon
Last edited by Dark79; 12-08-2007 at 02:34 PM.
Gigabyte H55N-USB3 (F5)
Intel Core i5 750 @ 3.80GHz
2x4GB G.Skill RipjawsX @ DDR3-1448 (8-8-8-25)
MSI R6950 Twin Frozr II @ 880/1375
1 x Samsung 250GB SATA HD
1 x Samsung 500GB SATA HD
Silverstone SG05 Case w/ ST45SF 450w PSU
did you find max fsb lazy?
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
Yea wants some results
DFI Lanparty LT X48-T2R
Intel Q6600 L737B242 ~ VID 1.2125 ~ 4000mhZ @ 1.48 vcore {lapped}
eVGA 8800GTS (G92) 512MB {stock}
Crucial Ballistix PC8500 Tracer ~ 1200mhZ 5-5-5-12 @ 2.05v
Lian Li PC-V1000 {modded}
Corsair HX 620W
Creative X-FI ExtremeMusic
Western Digital Raptor X 150GB
Thermalright-Ultra120 Xtreme {lapped} ft. Scythe S-Flex SFF21F S-FDB ~ Push & Pull
if i had my board i wouldnt be sleeping or havin sex for a few days lol
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
Im currently only testing on Air
Currently my max is 510 fsb, 510x7
Havent tried with a 6 multi
Will not boot at 520 even with voltage set at 1.6
Gonna have to see how far i can push this on water,
on my ip35pro max i have been able to push my cpu is 520fsb on water
so it may just be a limit on my cpu
Nikon User
Nikon D200 (Gone =( )/D300
Nikkor 18-105mm(Gone) // Nikkor 50mm 1.8 // Nikkor 55-200VR(Gone)
Tokina 12-24 // Tamron 90mm //
Manfrotto & Benro Legs // Benro Ballhead.
Current Lust = 80-200 Or 70-200VR1 <--Pending
No more computer parts for me... Well for now until I
really REALLY need to upgrade.
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
this thread so quiet its makin me nervous goin to x38 instead of p35 lol
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
Consider how many ppl actually got the board and how immature the BIOS is, I don't know what some are expecting...
Main: i7 2700k @ 5.0Ghz, ASUS Maximus V Formula Z77
16GB Corsair Vengeance 1600, ASUS GeForce GTX680
2x240GB SanDisk Extreme RAID0, Seasonic Platinum 1000, Corsair H100
Server: i7 2700k, ASROCK Z68 Extreme7 Gen3
16GB Patriot 1600, 120GB SanDisk Extreme
5TB JBOD, Corsair 850TX, Corsair H100
Media: Phenom II X4 940BE, Biostar TA790GX XE
4GB Corsair XMS2 1066, VisionTek HD4850 512MB
60GB OCZ Agility 3, SilverStone ST400
the shipping is soooo slow, ive had everything ready to test mine for a week now, but no board
Yea its almost as common as the DFI 790FX-M2R
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
Does this board have working ECC?
Got my board in today, and I've made another order from newegg for some parts. (ie. cpu and ram)
To give this thread some legitimacy, I guess I'll post the specs of the system I will be testing on first.
Hard Stuff:
Q6600
G.SKILL 4GB(2 x 2GB) DDR2 1000
DFI LP LT-x38 T2R
2 x Sapphire 3850 256mb (still waiting on my 3870 XXX edition)
WD Raptor 150
2x 74gb Raptors in Raid 0 for page file
Cooling:
D-Tek Fuzion w/ 3/8" (all is on 3/8)
MCR-320
MCP-355
3 Yate loon D12-SM12
Still testing but so far so good, my Q6600 is needing alot less Vcore than it did on my P5K-Deluxe. GSKILL 2x2GB modules are also running fine at 5:6 divider. I sorta copied the general settings from ppl in the LanParty P35 thread since I have no experience with the new DFI BIOS. The PWM area gets a bit toasty during small FFT prime, and some of the NB heat is contributing to higher CPU temp than my P5K. Gonna get a fan for the NB and see how much difference it makes.
Main: i7 2700k @ 5.0Ghz, ASUS Maximus V Formula Z77
16GB Corsair Vengeance 1600, ASUS GeForce GTX680
2x240GB SanDisk Extreme RAID0, Seasonic Platinum 1000, Corsair H100
Server: i7 2700k, ASROCK Z68 Extreme7 Gen3
16GB Patriot 1600, 120GB SanDisk Extreme
5TB JBOD, Corsair 850TX, Corsair H100
Media: Phenom II X4 940BE, Biostar TA790GX XE
4GB Corsair XMS2 1066, VisionTek HD4850 512MB
60GB OCZ Agility 3, SilverStone ST400
Some more.
Main: i7 2700k @ 5.0Ghz, ASUS Maximus V Formula Z77
16GB Corsair Vengeance 1600, ASUS GeForce GTX680
2x240GB SanDisk Extreme RAID0, Seasonic Platinum 1000, Corsair H100
Server: i7 2700k, ASROCK Z68 Extreme7 Gen3
16GB Patriot 1600, 120GB SanDisk Extreme
5TB JBOD, Corsair 850TX, Corsair H100
Media: Phenom II X4 940BE, Biostar TA790GX XE
4GB Corsair XMS2 1066, VisionTek HD4850 512MB
60GB OCZ Agility 3, SilverStone ST400
Really nice mobo, any sub zero results?
Regards
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LN˛ Pots, LD GFX-R1 Dice/LN˛ Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
Hows the shipping Bios Please? If stable and good can you please back up a copy of the Bin File and send it to me?
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
do we need to fix the northbridge on our own? will dfi give us a thermal paste or something? btw that northbridge seems to blocking TRUE facing to ram slot..btw how cool is this northbridge is with stock cooling?
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
Bookmarks