I present to you our last single stage unit
MCT IV "The mother of all singles"
Saludos
I present to you our last single stage unit
MCT IV "The mother of all singles"
Saludos
Very, very nice Just curious have you tried lowering that desuperheater coil down so that it gets the exhaust from the condensor fan? May make a positive difference may not
Regards
John.
"Thermodynamics is a funny subject. The first time you go through it, you don't understand it at all. The second time you go through it, you think you understand it, except for one or two points. The third time you go through it, you know you don't understand it, but by that time you are so used to that subject, it doesn't bother you anymore".
Very pretty How come there is no "ass" shot? :P
BTW, one thing I noticed, who in here DOESN'T smoke? (for those who builds this single stage stuff) I have yet to see one who doesn't, and thats counting 4 people I personally met, and bunch others who always post one with marboro for size comparison... :P (I smoke myself... hehe.... Just got curious)
Desuperheater... looks good. There just doesn't seem enough space for getting air cooling on that box (I sure will have plenty on my lian-li case since it is EATX case.... and might try cooling it with left over airflow...)
utterly beautiful
i hope mine can look 1/4 as good as yours does
CATV Tech for Comcast, Cox Communications, and Time Warner CableOriginally Posted by FUGGER
Thank you John!
Well, there is not much space to move the desuperheater, but, as you can see, there are 3 120mm fansdoing circulation inside the case, so, it is not a problem for the desuperheater to get air.
Jinu, the "ass" 120mm fan is a Panaflo "H" all 3 fans are regulated by the G-Froster X, they only work at 100% speed in the start, after -30c they slow down to 70% speed (pwm) so it is plenty airflow inside, and the rear fans is positioned to get good flow, so, is a silent unit.
BTW, here you have "my ass" shot
carbon "ass"
Very nice, what are the temps like?
That thing is beautiful!!!
Dell 2405FPW
Lian Li PC-75B
PCP&C 510 ASL
DFI LP UT NF4 SLI-DR Expert
Opteron 180
Chilly1 SS Phase Change
2x512MB Mushkin Redline XP4000
BFG 7800 GTX 256MB PCI-E
2xWD 740GD RAID 0
Maxtor 6B300S0
Plextor PX-716SA
Audigy 2 ZS
Klipsch Promedia Ultra 5.1
Originally Posted by jinu117
I DON'T NEVER have NEVER will!!
My Rig:
Q6600 2.4Ghz@2.9Ghz Custom Liquid Cooling
ATI X1950XTX 512mb DDR4
MSI 975X Platinum PowerUp Edition
2gb Kingston Hyper-X DDR2 667
Sound Blaster Audigy2
2 IDE HDD, 2 SATA HDD
LG DL16XDVD Writer,52X CDROM
OCZ 520Watt PSU 33Amp +12v
Thermaltake Xaser III case
Logitech Z560 4.1 400watt Surround Sound
3Dmark03-21112
3Dmark05-12154
3Dmark06-8054
Very nice work. Top notch finish
C-BuZz
I love the ass LoL. Such a clean nice look of carbon... Guessing computer power is passed through this unit? (so that it can manually shut off computer if power button doesn't work? :P)
Manually? what´s that?, the froster controls start up and shut downOriginally Posted by jinu117
No no no... what I meant was that if temp reaches too high, there must be a logic to shut unit down (by sending power button signal) and than after the set time has expired and temperature is getting dangerous, maybe it shuts down the system forcebly by taking the power off from PSU through back... (maybe I am going bit far.... It could be just simple splitter to the PSU :P).Originally Posted by Ssilencer
Used to have relay and control setup like that I made while back when I first got into peltier water cooling... (think about 2 years or 3 now)
the flex hose (thing coming out of the top... is that the right term?) looks awfully short.
other than that, beautiful
That is what the froster controllers do for emergency shut down.Originally Posted by jinu117
Bloody sorcerer, I will take a pic with my computer installed, is not short, it is just perfect.
Last edited by Ssilencer; 09-03-2005 at 09:54 PM.
nice build, but the evap line is a little short IMHO.
just thought i'd add, tobacco smokes YOU
I actually don't like too long of suction line. Makes it hard to close the lid of case. (which is the case with vapo LS, Mach I, Mach II)
shiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiit... *chokes on his cornflakes*
.:MeltedDuron:.
Aurora - i5 7600K@4.2GHz- Zotac GTX1070 Mini - 16gb Corsair Vengeance DDR3-3000 - Asus Prime Z270M - Fusion ioDrive Duo 1.2TB - 2x512GB Samsung Evo 970 Plus - Seagate FireCuda 2TB - HGST 4TB - Fractal Design Define Mini - Win7 and OSX 10.12
Lenore - Xeon L5430 - Gigabyte G33M-DS2R - 2x2GB HyperX 6400 - Sapphire Radeon HD5450 - M-Audio Delta 1010 - Adaptec SCSI - 256GB Firestorm SSD - 1TB Samsung F1 - 2U rack mounted - WinXP and OSX 10.6
Delilah - Pentium E5800 @ 4.2GHZ (VID mod) - Asrock Conroe865PE - Radeon 9800 Pro - 2x512MB GeiL Blue PC3200 - 30GB OCZ Vertex - 160GB Seagate - 2U rack mounted - Win98SE and Win2k
Jezabel - Athlon XP 2800+ Barton @ 2100 (200*10.5) - ATi FireGL X1 256MB - Asus A7N8X-E Dlx - 2x512MB OCZ EL PC3200 - OG Antec Case - Win98SE and Win2k
Mysti (WIP) - Pentium II 350MHz - Abit BX6 Rev2 - 4x256MB PC100 SDRAM - ATi Rage Fury Maxx - Diamond Monster 3D Voodoo2 8MB - 20GB IBM DeathStar - Still looking for the right case...
he sells those units to other people
Back in the phase change world
From the first time i saw it . I love it
Nice work. It is so beauty :P
Saludos y suerte
I want 1 just like that.get on MSN today when u have time and ill trade some of the stuff i have and u want for 1 of them
Beautifull unit there... Cheers!
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
Thank you guys
Hey BB, contact me by msn bro.
Bookmarks