Asus A8N-sli high htt records? and overclocking

[c7775]

well this is the best i have managed so far , suicide shot screeny only at 377 but the cpu died before i could take screenshot

[c7775]

highest stable in 3d and super pi / prime is a bit dodgy thou!

highest stable (cold air) clock
http://valid.x86-secret.com/show_oc?id=3255


spec:
A64+ 3000 *handpicked*
A8N SLI deluxe
2X256 Vitesta PC4000 cas3
Gigabyte GT6600 (575/1230)

[c7775]

some quick results :
no comparos im afraid as the machine has no internet connection

With lod tweaks
3D mark 2001 : 25300
3D mark 2003 : 9969
3D mark 2005 : 4280
Aquamark : 67000
Sandra 7480/7490
sandra bench at 8X279 ram at 1:1 HTT at 5X , 2-5-3-3-0
and tweaked with A64 tweaker of course !

super pi 31s

[Cyrus The Virus]

Some of my records on boxed air cooler (room temp 8°) XP-120 is coming next week

[c7775]

some more results

suicide cpu clock + suicide HTT clock

[c7775]

really nice stuff cyrus m8, your definitely beating me on clocks
but see if you can chase me down on the HTT results

[Cyrus The Virus]

I have done that one and I erased all my data, so no thanks

[xtrempinoy]

how come your Asus baord is hitting high HTT?? i heard that board can't hit HIGH htt at all.. that way i didn't want it. but now that i saw your results i might consider the board again.

[eva2000]

best for me is

[Rogosh]

hey cyrus what bios you running right now and have u modded your board for a higher vcore? /do you havea guide that i can find to do that as i cant get over 1.52vcore.

[eva2000]

i used 1004.01 beta bios 1.55v in bios = 1.6v in windows for me

[Cyrus The Virus]

http://www.xtremesystems.org/forums/...ad.php?t=55909 for my own made vcore mod up to 1.85V.

I am running 1007-002

[c7775]

hi everyone , what if i said that the northbridge revision was different to the
one you can get in the shops :banana4: would that be sufficient enough..
To put it another way, this is what asus produced to cure the problem of low HTT clocks.

We got 5X of these motherboards 12 days ago in the office to test a competitors PCB design and i thought i would take one home for the weekend.


There are no mods on the mobo *obviously considering ill get my head chopped off it there were*, and the WinXP install is from my non-deluxe board
so its not very good for benchies but nevertheless it is reporting high numbers!

it can post up to 3.6Ghz (400X9, 200% over speck) but doesnt do much else

[c7775]

how come your Asus baord is hitting high HTT?? i heard that board can't hit HIGH htt at all.. that way i didn't want it. but now that i saw your results i might consider the board again.

read post above, if you are considering buying this board, please wait until the 22nd of march for the new revision to come out officially ! take care

[Cyrus The Virus]

What does your Mem speed on 1T ???

[c7775]

What does your Mem speed on 1T ???

as in whats the highest 1:1 on 1T ?

280fsb 1:1 cause my mem is PC4000 after all

but i run at 333/268 with 1T all day long

[DazzXP]

I have had my DFI board do 350MHz 1:1 CMD T2, 700MHz 3/5/5/8 bandwith was lower then 300 1:1 @ T1 2.5/4/4/8 was thats what i am sticking too that and i get an extra 350MHz coreclock speed so go figues. From what i have seen the DFI boards can hit 500MHz 1:2 the extra voltage options are great.

[DazzXP]

how come your Asus baord is hitting high HTT?? i heard that board can't hit HIGH htt at all.. that way i didn't want it. but now that i saw your results i might consider the board again.

The ASUS boards are great overclockers just that their T1 overclocking settings are very poor, they crap out about 260MHz the DFI boards can hit 318MHz @ T1 well thats what my board can do.

[Cyrus The Virus]

as in whats the highest 1:1 on 1T ?

280fsb 1:1 cause my mem is PC4000 after all

but i run at 333/268 with 1T all day long

is that 280 1T ?? or 2T it seems that you don't have much problemens running higer speed my max on 1T is 248 with 2-2-2-5-1T

And what bios do you have ??

[c7775]

is that 280 1T ?? or 2T it seems that you don't have much problemens running higer speed my max on 1T is 248 with 2-2-2-5-1T

And what bios do you have ??

mate i can run 280 at 2.5-3-3-0-1T-16IDLE timer !
1T is absolutely no problem with the board all the way up to 300 in fact
and with 4XHTT, but for that i need to put the PC4800 twister, and i dont have access to it anymore i use bios 1006.002 with it, but i tried 1003 and it works just fine

[adz]

seems like the 1t problem isn't a bios problem...just the ones with the new revision are going to have a good OC. i'm not happy about it since I'll not change motherboard..

[Cyrus The Virus]

If it is a Hardware problem I am p*****off on ASUS.

But what says CPU-Z about the Rev. because your bord version is 1.02, I also have 1.02 but A3 ?

And what is your best score in SuperPi with best timings speeds etc

[c7775]

If it is a Hardware problem I am p*****off on ASUS.

But what says CPU-Z about the Rev. because your board version is 1.02, I also have 1.02 but A3 ?

And what is your best score in SuperPi with best timings speeds etc

beats me m8, i lent this motherboard but when we got it i was told that it was the latest revision PCB anyways ! so i thought id investgate it and it reall is MUCH MUCH better than my non-deluxe which i purchased 3 months ago !

anyways tweaked 1m super pi in windows 2003 server

at 2688 (336FSB/Mem at 333 devider so around 269Mhz
2.5-3-3-0-1T -1.96u)
i get 30seconds

[Cyrus The Virus]

So you don't know which reversion it is ?

I hope asus is still coming with a fix.

I you still have the board can you check what the value of the caps are near the dimms

[c7775]

So you don't know which reversion it is ?

I hope asus is still coming with a fix.

I you still have the board can you check what the value of the caps are near the dimms

hi mate , i can check when i go back to work on tuesday ! there was something about a revision A3A of the actual northbridge, but i cant verify
this since its not my board !

but ill poke around and tell you