Before
After,
Before
After,
Last edited by USFORCES; 11-20-2009 at 04:24 AM.
On water
E8600@ 5GHz http://img204.imageshack.us/img204/6...fwprimeau4.jpg
Q9650@ 4GHz 24/7 1.27V http://valid.canardpc.com/show_oc.php?id=1356475
980x@ 4.2GHz 24/7 1.32V http://valid.canardpc.com/show_oc.php?id=1378573
980x@ 5GHz 1.50V http://valid.canardpc.com/show_oc.php?id=1534617
very nice! it will quite a sight i feel when completed. the obvious downside is moving the machine about but if your not bothered then i guess its a non issue!
Thank you
Yeah I probably won't move it much, It will kind of be like a tech station the motherboard will be seprate from everything else so when I upgrade all I have to do is drain the loops from below remove the top glass pull the board out.
On water
E8600@ 5GHz http://img204.imageshack.us/img204/6...fwprimeau4.jpg
Q9650@ 4GHz 24/7 1.27V http://valid.canardpc.com/show_oc.php?id=1356475
980x@ 4.2GHz 24/7 1.32V http://valid.canardpc.com/show_oc.php?id=1378573
980x@ 5GHz 1.50V http://valid.canardpc.com/show_oc.php?id=1534617
do you plan on making the reservoir the size of your sketchup? That would have to be the biggest PC reservoir ever. I plan on also making a desk case but am thinking of putting the components inside the top portion of the desk and putting it on some hinges so I can life the cover up to get to the PC. Good luck, can't wait to see how this build ends up.
If you make a reservoir that big, maybe you should consider making it a waterfall/bong style cooler.
That's a waterfall and that's my next project maybe...
Last edited by USFORCES; 11-10-2009 at 11:53 AM.
On water
E8600@ 5GHz http://img204.imageshack.us/img204/6...fwprimeau4.jpg
Q9650@ 4GHz 24/7 1.27V http://valid.canardpc.com/show_oc.php?id=1356475
980x@ 4.2GHz 24/7 1.32V http://valid.canardpc.com/show_oc.php?id=1378573
980x@ 5GHz 1.50V http://valid.canardpc.com/show_oc.php?id=1534617
looks really really nice! cant wait to see this one finished!
Project: HeadShot
Intel i7 3770k | Corsair H100
EVGA GTX-590 Classified | XSPC GTX 590 Waterblock
Gigabyte G1.Sniper 2 MotherBoard | Swiftech MCR-320 Res/Rad/Pump
16GB Corsair Vengeance Low Profile Ram
Crucial M4 128GB / Intel X25-M 160GB / WD 1TB Black
Corsair AX850W PSU
27" Apple Cinema Display (2560x1440)
Corsair 600t White
Picture
You best be Crunching and Folding/GPUgrid'ing!
USFORCES, you know that with reservoir of that size you would not need any radiator with noisy fans?
On water
E8600@ 5GHz http://img204.imageshack.us/img204/6...fwprimeau4.jpg
Q9650@ 4GHz 24/7 1.27V http://valid.canardpc.com/show_oc.php?id=1356475
980x@ 4.2GHz 24/7 1.32V http://valid.canardpc.com/show_oc.php?id=1378573
980x@ 5GHz 1.50V http://valid.canardpc.com/show_oc.php?id=1534617
Great design concept. Can't wait to see your finished product.
Intel Xeon X5650
ASUS Sabertooth X58
3 x 2 Gb G.Skill PC3-12800
MSI GTX 780Ti Gaming 3 Gb
Seasonic X850
Corsair 750D
Heatkiller 3.0/D5 & EK Top/Alphacool UT60 240
cooool
I think its "too fixed", because you can't move the reservoir nor the table... but it will probably perform very well, specially if you make at least one side of the reservoir with aluminum or copper sheet.
Sony Vaio VPCSA35GX while 7Mm away from home... Back at home:
C2Q QX6850 3Ghz@3.4Ghz - P35C-DS3R
XFX GT220 - 2x2Gb OCZ PC9200@1004 5-5-5-15
3X500Gb + 64Gb - Case Thermaltake V-3 Black Edition
AC F7 Pro + TR HR-05
is that bottom tube on the lower gfx card in its final place? it looks like it's not very far up the barb?
ah - haha, that might be it
I was just dry fitting everything to make sure it works,
Last edited by USFORCES; 11-10-2009 at 11:54 AM.
On water
E8600@ 5GHz http://img204.imageshack.us/img204/6...fwprimeau4.jpg
Q9650@ 4GHz 24/7 1.27V http://valid.canardpc.com/show_oc.php?id=1356475
980x@ 4.2GHz 24/7 1.32V http://valid.canardpc.com/show_oc.php?id=1378573
980x@ 5GHz 1.50V http://valid.canardpc.com/show_oc.php?id=1534617
Niiiiice. Sub'ed.
__________________
Crunching XS:WCG+GpuGrid Car RadsThe Hole-Geothermal Bong! Bong! Bong! Chill, man, chill HVC PlateHX Conversion
Very nice mod.With some leds it would be more awesome!!
May i ask something quite off-topic...(?)
Wich program you used to design your project?
I'm in the mood of making a mod too .
Thanks and for one more time EXCELLENT mod!
Runnin on nVidia and Intel
GG - GREEK GAMER
Thanks,
google sketchup
Didn't get any leds yet I did get 12" green and 12" purple cold cathode I'm going to see how well they do first.
On water
E8600@ 5GHz http://img204.imageshack.us/img204/6...fwprimeau4.jpg
Q9650@ 4GHz 24/7 1.27V http://valid.canardpc.com/show_oc.php?id=1356475
980x@ 4.2GHz 24/7 1.32V http://valid.canardpc.com/show_oc.php?id=1378573
980x@ 5GHz 1.50V http://valid.canardpc.com/show_oc.php?id=1534617
Thanks a lot !!
When you get some leds ,post some pics
Runnin on nVidia and Intel
GG - GREEK GAMER
On water
E8600@ 5GHz http://img204.imageshack.us/img204/6...fwprimeau4.jpg
Q9650@ 4GHz 24/7 1.27V http://valid.canardpc.com/show_oc.php?id=1356475
980x@ 4.2GHz 24/7 1.32V http://valid.canardpc.com/show_oc.php?id=1378573
980x@ 5GHz 1.50V http://valid.canardpc.com/show_oc.php?id=1534617
ww! Very cool. Very Cool. Thanx for sharing....
__________________
Crunching XS:WCG+GpuGrid Car RadsThe Hole-Geothermal Bong! Bong! Bong! Chill, man, chill HVC PlateHX Conversion
I thought about doing something like this before as well. You did a outstanding job man. Looks really good. One thing that I would probly change or modify is to have sliding glass above the board.
Intel I7 920 (4.2ghz)
EVGA x58 Classified 760
Asus 580 DC2
Corsair Dominator GT 6gb
256gb SSD
Bookmarks