Hi guys I tried my heatkiller water block on my 5870 and at first everything lined up except 2 screw holes on outside of card. I decided to give it another try and I managed to get one of the outside screws in. The bottom card is running at 18c at idle.I am about to install block on top card.
Xigmatek Elysium Case
Intel I7-3770K
Asus Sabertooth Z77
16 Gigs Ripjaws 2133mhz Ram
Mushkin 240 SSD
Lightscribe Dvd Burners
EVGA GTX 680
Aquacomputer Gpu Block
Cooler Master Hybrid 1050 Watt Pws
EK Supremacy Cpu Block
Xspc RX360 Rad
Xspc XS360 Rad
Phobya 250 Balancer Res
2 x Mcp 350 Pumps
The thread title is a little misleading - this isn't a 5870 FC block installed, this is a HK-4870/90 block installed on a 5870 card.
Can we have some closeups of the misaligned screws?
Rig specs
CPU: i7 5960X Mobo: Asus X99 Deluxe RAM: 4x4GB G.Skill DDR4-2400 CAS-15 VGA: 2x eVGA GTX680 Superclock PSU: Corsair AX1200
Foundational Falsehoods of Creationism
Peak temps would be nice too. I hope the screw didn't get cross threaded.
Project Millertime: The Core I5 build
Crunching/folding box on air: AMD Athlon X2 7750 Black Edition; Sapphire Radeon HD 4830; Gigabyte MA78GM-US2H; Lian Li PC-V351; Windows 7 RC
I just installed the heatkiller 4890 water block on my 2 5870,s. I didnt mean to mislead anyway in last post by the title. This block is from a 4890 and the 4 holes around gpu line up fine. Take a look for yourself and tell me what you think.
Xigmatek Elysium Case
Intel I7-3770K
Asus Sabertooth Z77
16 Gigs Ripjaws 2133mhz Ram
Mushkin 240 SSD
Lightscribe Dvd Burners
EVGA GTX 680
Aquacomputer Gpu Block
Cooler Master Hybrid 1050 Watt Pws
EK Supremacy Cpu Block
Xspc RX360 Rad
Xspc XS360 Rad
Phobya 250 Balancer Res
2 x Mcp 350 Pumps
very nice!!
Wow, 21 and 25 celsius not bad AT ALL
ASUS Sabertooth P67B3ˇ nVidia GTX580 1536MB PhysX ˇ Intel Core i7 2600K 4.5GHz ˇ Corsair TX850W ˇ Creative X-Fi Titanium Fatal1ty
8GB GSKill Sniper PC3-16000 7-8-7 ˇ OCZ Agility3 SSD 240GB + Intel 320 SSD 160GB + Samsung F3 2TB + WD 640AAKS 640GB ˇ Corsair 650D ˇ DELL U2711 27"
The screw did not cross thread I made sure of that.Will try to get Peak temps soon. I just finished with install of 2nd block you can see the blocks and idle temp in the other thread I posted.
Xigmatek Elysium Case
Intel I7-3770K
Asus Sabertooth Z77
16 Gigs Ripjaws 2133mhz Ram
Mushkin 240 SSD
Lightscribe Dvd Burners
EVGA GTX 680
Aquacomputer Gpu Block
Cooler Master Hybrid 1050 Watt Pws
EK Supremacy Cpu Block
Xspc RX360 Rad
Xspc XS360 Rad
Phobya 250 Balancer Res
2 x Mcp 350 Pumps
I deleted the other thread and merged the posts into this one to give you one thread to respond to and minimize confusion.
Nice temps.
Nice job, looking forward to this dataOriginally Posted by rmorse27
(when you run @ load, can you have four gpu-z windows showing all sensors on both cards?)
[SIGPIC][/SIGPIC]Bring... bring the amber lamps.
It's not cooling this guy here, though:
ASUS Sabertooth P67B3ˇ nVidia GTX580 1536MB PhysX ˇ Intel Core i7 2600K 4.5GHz ˇ Corsair TX850W ˇ Creative X-Fi Titanium Fatal1ty
8GB GSKill Sniper PC3-16000 7-8-7 ˇ OCZ Agility3 SSD 240GB + Intel 320 SSD 160GB + Samsung F3 2TB + WD 640AAKS 640GB ˇ Corsair 650D ˇ DELL U2711 27"
Now that makes you think what else apart from the GPU core is not in contact with the block...
Is that a ram chip broken off?
no it is not
Here are some peak temps when playing cod waw. I check the other temps and there is nothing that jumps at me.
Xigmatek Elysium Case
Intel I7-3770K
Asus Sabertooth Z77
16 Gigs Ripjaws 2133mhz Ram
Mushkin 240 SSD
Lightscribe Dvd Burners
EVGA GTX 680
Aquacomputer Gpu Block
Cooler Master Hybrid 1050 Watt Pws
EK Supremacy Cpu Block
Xspc RX360 Rad
Xspc XS360 Rad
Phobya 250 Balancer Res
2 x Mcp 350 Pumps
rmorse27, MVDDC Phase Temp #1?
[SIGPIC][/SIGPIC]Bring... bring the amber lamps.
Those are some pretty massive disparities between the first and second card. Temps, clocks, power-draw - is Crossfire enabled?
Rig specs
CPU: i7 5960X Mobo: Asus X99 Deluxe RAM: 4x4GB G.Skill DDR4-2400 CAS-15 VGA: 2x eVGA GTX680 Superclock PSU: Corsair AX1200
Foundational Falsehoods of Creationism
There where disparities on air and yes xfire is enabled. I am ordering some heat sinks for that area that,s not covered. Everybodys a critic.
Xigmatek Elysium Case
Intel I7-3770K
Asus Sabertooth Z77
16 Gigs Ripjaws 2133mhz Ram
Mushkin 240 SSD
Lightscribe Dvd Burners
EVGA GTX 680
Aquacomputer Gpu Block
Cooler Master Hybrid 1050 Watt Pws
EK Supremacy Cpu Block
Xspc RX360 Rad
Xspc XS360 Rad
Phobya 250 Balancer Res
2 x Mcp 350 Pumps
He's just asking because your second gpuz is showing idle clocks of 157/300 while your first card is in 3d. And, 34C / 22C implies your only running 1 card in 3d. Try different Cat AI settings.
[SIGPIC][/SIGPIC]Bring... bring the amber lamps.
Hey, I'm not criticising anything - but if I was you, I'd be very concerned about my second 5870 running at a core clock of 157MHz and a mem clock of 300MHz, when the first is running at 890/1225. Either GPU-Z is reading wrong, which is unlikely given that it's picking the first card up just fine, or the second card is stuck in 2D mode.
Rig specs
CPU: i7 5960X Mobo: Asus X99 Deluxe RAM: 4x4GB G.Skill DDR4-2400 CAS-15 VGA: 2x eVGA GTX680 Superclock PSU: Corsair AX1200
Foundational Falsehoods of Creationism
sorry about critic remark,if its stuck in 2d does that mean cards is bad or maybe just the driver?
Xigmatek Elysium Case
Intel I7-3770K
Asus Sabertooth Z77
16 Gigs Ripjaws 2133mhz Ram
Mushkin 240 SSD
Lightscribe Dvd Burners
EVGA GTX 680
Aquacomputer Gpu Block
Cooler Master Hybrid 1050 Watt Pws
EK Supremacy Cpu Block
Xspc RX360 Rad
Xspc XS360 Rad
Phobya 250 Balancer Res
2 x Mcp 350 Pumps
If that chip is not cooled the card is sure to DIE. SOON.
Seconded. I'm guessing something in excess of 100ēC.
Last edited by largon; 10-08-2009 at 10:42 AM.
You were not supposed to see this.
ATI drivers disable the second card when the game is not using cfx? also i have seen that occur in various situations. Try a benchmark program instead furmark for example. but i would get some cooling on those chips uncooled before you get to the benches.
yes. try it and (possibly) fry it.
Nope, looks like a MOSFET, which probably is.
Yeah i'd take care of cooling it. Watch out for it @ OP, might kill the card
ASUS Sabertooth P67B3ˇ nVidia GTX580 1536MB PhysX ˇ Intel Core i7 2600K 4.5GHz ˇ Corsair TX850W ˇ Creative X-Fi Titanium Fatal1ty
8GB GSKill Sniper PC3-16000 7-8-7 ˇ OCZ Agility3 SSD 240GB + Intel 320 SSD 160GB + Samsung F3 2TB + WD 640AAKS 640GB ˇ Corsair 650D ˇ DELL U2711 27"
that part is the mosfet for the ram power, it needs a heatsink but anything works from the looks of it even the little enzo ones
Last edited by zanzabar; 10-09-2009 at 12:54 AM.
5930k, R5E, samsung 8GBx4 d-die, vega 56, wd gold 8TB, wd 4TB red, 2TB raid1 wd blue 5400
samsung 840 evo 500GB, HP EX 1TB NVME , CM690II, swiftech h220, corsair 750hxi
Posting Permissions
Reply With Quote
Bookmarks