DDR3-2000 / DDR3-1800 - Corsair Dominator 4GB intro results on Striker II Extreme

[bachus_anonym]

Hi guys!

I just wanted to share some introductory results (more on Monday) for 2 x 2GB parts on Striker II Extreme. I think 0704 is definitely the best BIOS so far. I've been testing few of our new products since Tuesday, and it really looks good! No corruption at this moment, various tests done, including creating and testing large WinRAR archives, OS installations, looping 3DMark06, multiple restarts, etc. So far so good!

Setup:
Corsair Dominator TW3X4G1800C8DF, TW3X4G2000C9DF
Asus Striker II Extreme, BIOS 0704
Core 2 Duo E8400, Core 2 Extreme QX9770
eVGA 8800GTS
Corsair HX620

Some screenshots below:

New 4GB kit - 400FSB / DDR3-2000 CL9 @ 1.90v - Memtest For Windows
This is TW3X4G2000C9DFNV that we're launching at Computex 2008 next week.

For 2 x 2GB kits:

P1 – [Enabled]
P2 – [Enabled]
-------
CPU PLL Voltage - [Auto]
CPU VTT Voltage -[1.30V]
Memory Voltage - [1.90V] or 1.80V for 1800C8
NB Core Voltage - [1.54V] or 1.44V for 1800C8
SB Core Voltage - [Auto]
CPU GTL_REF0 Ratio - [Auto]
CPU GTL_REF1 Ratio - [Auto]
CPU GTL_REF2 Ratio - [Auto]
CPU GTL_REF3 Ratio - [Auto]
NB GTL_REF Ratio - [Auto]
DDR3 CHA1 Ref Voltage - [Auto]
DDR3 CHB1 Ref Voltage - [Auto]
DDR3 CHA2 Ref Voltage - [Auto]
DDR3 CHB2 Ref Voltage - [Auto]

--- Click image for larger version ---

New 4GB kit - 400FSB / DDR3-2000 CL9 @ 1.90v - Prime95

--- Click image for larger version ---

4GB 1800C8 kit - 400FSB / DDR3-1800 CL8 @ 1.80v - Memtest For Windows
This is with 0601 BIOS, even that BIOS was very good for DDR3-1800. I copied wrong files onto my USB key...

--- Click image for larger version ---


4GB 1800C8 kit - 400FSB / DDR3-1800 CL8 @ 1.80v - Prime95 For Windows
This is with 0601 BIOS, even that BIOS was very good for DDR3-1800. I copied wrong files onto my USB key...

--- Click image for larger version ---



Oh, I also checked out our 2133C9 ES kit from my previous thread and got some initial results in.

2GB kit in development - 529FSB / DDR3-2116 CL9 @ 2.00v - DualSpi32M

P1 – [Enabled]
P2 – [Enabled]
-------
CPU PLL Voltage - [1.70V]
CPU VTT Voltage -[1.30V]
Memory Voltage - [2.00V]
NB Core Voltage - [1.70V]
SB Core Voltage - [1.55V]
CPU GTL_REF0 Ratio - [Auto]
CPU GTL_REF1 Ratio - [Auto]
CPU GTL_REF2 Ratio - [Auto]
CPU GTL_REF3 Ratio - [Auto]
NB GTL_REF Ratio - [Auto]
DDR3 CHA1 Ref Voltage - [Auto]
DDR3 CHB1 Ref Voltage - [Auto]
DDR3 CHA2 Ref Voltage - [Auto]
DDR3 CHB2 Ref Voltage - [Auto]

--- Click image for larger version ---



Notes:
- setting up 4GB kit with a quad-core @ 450FSB, and RAM @ 1800C8 or around 2000C9 required (for me at least) only a bump of NB Voltage to 1.60V;
- I also have some older screenshots of our 2 x 2GB done on E8400 @ 510FSB/2040DDR3 but I don't think I want to post those - they may not seem very typical