E8400 squeezing

[VoRtAn_MaDgE]

Well...i know this is not xtreme but not a bad cpu clocking for the cooling that i'm able to give to this little bastard top10 E8400 cpu-z hwbot

Stock mhz and volts bios shows -70...dunno loaded, smartguardian shows +200ºC



http://valid.x86-secret.com/show_oc.php?id=317036

real vcore and system pic


Next step...find max benchable pi and 3dmark

These dfi's mobos rocks hard

cpu or mobo limited??? going to test with lower multi to find out

[Superfrag]

theres just one question i have..
which one is better.. the dfi lp p35 or the x38 ?
and amazing OC.. these boards do rock hard

[Oliver]

Does not look bad, but would like to see more system information.

Superfrag: You gotta take the dfi ut or lt t2r @ p35 if you want a p35 based board, that clocks 45nm wolfs really good.

Use 109 beta bios and gtl ref x tweaks.

[tiborrr]

DFI lies by about 20°C if not more. Check this thread - http://www.xtremesystems.org/forums/...&postcount=103 - i got QX9650 to show -77°C on my 3/8HP 12ccm Electrolux singlestage cooler

[Superfrag]

so the dfi p35 is better then the dfi x38 overall?
unless ofcourse u want to crossfire.. which i dont want to do.. confused between the two..

[Tofu Guy]

I am looking into the DFI P35 for my new e8400. Or if i can get ahold of a Gigabyte G33M-DS2R, then I would get that, merely since it is cheaper and I don't plan on doing anything more than air on this chip. (Will become my backup pc)

[sTeco]

These dfi's mobos rocks hard

Nice score guy

please tell me your bios voltage settings, i reached 581FSB on air, i will try to improve it :p

[Tsurphr]

Nice score guy

please tell me your bios voltage settings, i reached 581FSB on air, i will try to improve it :p

What kind of air cooling are you using? Some specs and screenies of your rig would be sweet

I'm using a Thermalright IFX-14 (without back cooler) with 2x 120mm fans @ 2000rpm and CoreTemp reports my load temps peaking at 72C under load doing 4.2GHz (467 fsb), which seems a bit high and I dont want to push it beyond that.

[sTeco]

What kind of air cooling are you using? Some specs and screenies of your rig would be sweet

I'm using a Thermalright IFX-14 (without back cooler) with 2x 120mm fans @ 2000rpm and CoreTemp reports my load temps peaking at 72C under load doing 4.2GHz (467 fsb), which seems a bit high and I dont want to push it beyond that.

here is a Vali of the 581FSB, I´m using a Zalman 9700NT. I opened my window while benching the E8400



in 1-2 weeks i will get my Dice/LN2-Pot, so i will bench again especially superpi

[WeStSiDePLaYa]

What speed can you get stable?

Notice any degradation from the 1.8vcore?