Minsk XTReme mkII (-13*C @ 605W)

[piotres]

Hello

That's chiller for mine good friend PMP . He want to cool using it whole config like :QX CPU (QX6850ES now), 2* 8800 ULTRA, Asus Striker mobo - as You can see quite hot stuff . That's second edition of his chiller, first was build on smaller aspera compressor, and small condensor and just can't cope with so huge load :-/ . So I decided to built it completelly new.

Name of chiller is taken from legendary (in Poland) russian refrigerator .

Specs :

compressor: Rotary 6826 BTU
heat exchanger: plate HX 12 plates
XV: Danfoss TS2 + Frigomec 0.88l receiver
condensor: 1.9kW cooled by orginal 230V fan
refrigerant : R134a (finally)
case: metal case 46 x 46 x 46 cm, black powder coating
others: electronic controller Dixell XR20C, one 230V fan 250mm on the back of case, Laing D5 pump, Swiftech small reservoir.



Laing D5 + Swiftech res. .













Around -30*C with no-load on pure R507 .



Power consumption when chiller is cooling liquid , as You can see on pic rotary musn't be so hungy .







-13*C liquid on 605W heater . Pure R507.



Finish .





Chiller has been on one polish ocer meeting in Gdansk . There is had been cooling Asus Striker mobo, liquid was around -25*C all the time .



But condensation with R507 was too big, liquid was just WAY too cold . So decision to try R507 and 134a blend. Temp on 605W load with that blend.



But for owner...it was too cold still . So finally I put pure R134a, temperatures are like +2*C@605W .

I hope that owner will post some pics here in future .

Regards
Peter

[knightwolf654]

that is beautiful!

[afireinside]

Um is that a board with a chilled SB and mosfets? :|

[TopherTony]

ya know piotres, i dont think i have ever seen your ts2 and plate hx naked. you always cover it up to take photos...are you hiding some secret weapon?

[piotres]

@afireinside : yes, sb,nb,mosfets = all chilled water

@TopherTony :



from Magoa's cascade topic

Thanks
Peter

[Charles Wirth]

Minsk, register again.

I saw you had multiple registers and deleted them all. Now that I see who you are I will be sure I get yours through.

[piotres]

Sorry Fugger, I don't understand what do You mean ... ?