New Memory Tweaker for Intel Chipsets

[FELIX]

=>Vincent: Could you make a registers dump (with cpuz->last table->Save report (.TXT))
and send it at memset@hotmail.fr .

[Vincent]

done

[geogan]

I just tried CPU-tweaker 1.5 and every time i run it after a few seconds I get a "divide by zero" error (Exception EDivByZero in module CPU-Tweaker.exe at 000D9AA1) and program exits. Is this a known problem?


Also when I run Memset 4.1 the "Apply" button is disabled... does it not work on Rampage II board?

[Brama]

Also when I run Memset 4.1 the "Apply" button is disabled... does it not work on Rampage II board?

Unfortunately no.
Asus locked the memory space where are stored the memory latencies, so no way.

[donmarkoni]

I just tried CPU-tweaker 1.5 and every time i run it after a few seconds I get a "divide by zero" error (Exception EDivByZero in module CPU-Tweaker.exe at 000D9AA1) and program exits. Is this a known problem?

I had/have same problem and it looked like fixed once, but actually wasn't. Didn't want to bother FELIX any more about it, as it looked like I was the only one.
Anyway, program works (for me at least) even when error is displayed, I just move the window to the side and continue tweaking.

[wiener007]

I just tried CPU-tweaker 1.5 and every time i run it after a few seconds I get a "divide by zero" error (Exception EDivByZero in module CPU-Tweaker.exe at 000D9AA1) and program exits. Is this a known problem?


Also when I run Memset 4.1 the "Apply" button is disabled... does it not work on Rampage II board?

I have also exactly the same problem.

[eclipseaudio4]

Felix seems that the clocks are reading incorrect on the new 95W 1055T's at least in my case.
Running Asus CH4 E , 1055T 95W, F3-16000CL7D flares

Nice app BTW!

[zalbard]

Felix seems that the clocks are reading incorrect on the new 95W 1055T's at least in my case.
Running Asus CH4 E , 1055T 95W, F3-16000CL7D flares

Nice app BTW!

Um, this is Memory Tweaker for Intel Chipsets...

[C-N]

Been using this for a while now & its been excellent so Felix

On a non important side note ... the EIST box is always checked/ticked when I have EIST disabled in the BIOS.

http://i106.photobucket.com/albums/m...R1960CL81T.png

Edit.... Think its something to do with the BIOS fooling the chip to run on Turbo mode all the time so dont think its an issue.
.

[int0x13]

Hi to all extrem systems overclockers! I often felt into your website when doing overclocking search with google, and often the answers were very interesting.
Now I explain briefly my situation:
Recently i had to do a clearCMOS with my Asus P5K Premium Wifi-AP, and so i lost my overclocking settings and i did not save it anywhere. (actually i did save it into OC profiles, but i was unable to restore it, the values were not the good ones). All i have saved before clear CMOS is a CPU-Z full dump (registers report). I'd like to restore the old timings i had at the time of this dump, but for this i'd need to parse the MCHBAR dump into cpu-z report. I'm unable to do this myself, but i think that somebody here could do. I was thinking about something that would be really cool: What if we could just open an MCHBAR dump (hex byte format from cpu-z or mchbaredit) into memset and then just read the parsed timings from it? Actually something that may be useful would be a SAVE/OPEN feature into memset, so that we could import/export the mchbar dump corresponding to the displayed timings. What do you think Felix?

Cfg:
Asus P5K Premium Blackpearl Edition (Intel P35)
Q6600@3.5Ghz
2x1GB Corsair DDR2@400 4-4-4-12 Perf Level7
Windows XP PRO SP3 32 BITS
MemSet 4.1

[Formula350]

Felix: Great program, thank you for it and MemSet!

For AMD's UnCore, you do not have to restart for it to apply, so you could edit that part out for them. Also maybe a rename to CPU-NB?

Then is there perhaps a way to enable (un-gray out) the options to change the: tWR, HyperTransport multi/voltage, Driver Weak Mode and Power Down Mode? While the latter 2 aren't too much of interest, the tWR and HT would be really nice to have as it would mean I'd not need AMD OverDrive anymore!

As for an option that isn't in the program: There any way to add the ability to change the memory divider? A64Info for the S939 had that option and that was almost my favorite feature, as it let me do just about every bit of overclocking from Windows except for HT multiplier. I miss being able to change that on the fly for the option of changing timings lower if a program happens to be more responsive to them as apposed to clock speed

Anyways, thanks again!

Um, this is Memory Tweaker for Intel Chipsets...

It might be in the Intel section, but it's always supported Phenoms too...

[GamerBR]

Great software. I've own a laptop for more than a year that the limiting factor for overclock was obviously the memory, and only today I had this idea to search if there was a software able to change timings on windows.

While I'm able to change tRCD, tRP and tRAS I can't change CL, I can choose some other number, but it just ignores and return to the default, I don't even have to apply the settings for that to happen. Does that mean that only CL is locked?

Edit: Nevermind, tried SPDTool but apparently my memory doesn't support CAS over 6, at least the only options there are 4, 5 and 6.

[Formula350]

Great software. I've own a laptop for more than a year that the limiting factor for overclock was obviously the memory, and only today I had this idea to search if there was a software able to change timings on windows.

While I'm able to change tRCD, tRP and tRAS I can't change CL, I can choose some other number, but it just ignores and return to the default, I don't even have to apply the settings for that to happen. Does that mean that only CL is locked?

Edit: Nevermind, tried SPDTool but apparently my memory doesn't support CAS over 6, at least the only options there are 4, 5 and 6.

Well it might be that (lack of supported CAS), in my experience with other program, the programmers often lock that option out due to almost certain chance of locking the system if you try to change it.

Give Taiphoon (spelled as such) a go, it's like SPDTool, though sadly it has to be registered to program the SPD Tables

[C-N]

Felix, where the sandy/P67 version at...... im in pain here without it!!

You dont realise how good something is untill its gone/not working.

[BulldogPO]

Same here!

[Hyperhorn]

Maybe we should ask which data he needs for Sandy-Bridge-support and show we would like to help and provide these data and do some beta-testing if necessary.

[C-N]

Think hes good for data i sent him a cpu-z dump he just needs some time.

And ye im up for testing

[zalbard]

I agree, dinos22.
Perhaps FELIX is currently busy, or needs a SB setup to work on his software. Whatever it is, it is understandable, and I am sure he will let us know sooner or later.

[FELIX]

...yes I'm very busy at this time (and probably for a long time )
but I try to take some time for make a SD update, simply the
Intel datasheet report nothing about memory timings and other setting.
and I can't do nothing without it.

[Formula350]

...yes I'm very busy at this time (and probably for a long time )
but I try to take some time for make a SD update, simply the
Intel datasheet report nothing about memory timings and other setting.
and I can't do nothing without it.

Since we all know how it is to be busy, and we all appreciate the what you've provided us (regardless of if they express it)!!

I think this is the Datasheet you want (fullll of registers info!):
http://download.intel.com/design/pro...hts/324642.pdf (~4.8mb, 290 pages)
EDIT: Found an update as well which might be of relevance... One change in the update PDF states for one of the many Erratas listed: "Changing the Memory Type for an In-Use Page Translation May Lead to Memory-
Ordering Violations"
ftp://download.intel.com/design/proc...pdt/324643.pdf

I found this one from google, and I assume it is the same one you looked at:
http://download.intel.com/design/pro...hts/324641.pdf

THEN I found ftp://download.intel.com and went to the "datashts" directory, sorted by date, and checked out the first one. It had a ton of info, but was for different chip So I checked the one below it, which was ONE PDF number different, and it had to do with the same CPU... So I figured "why not, I'll see what "324642.pdf" comes up with in the link. Sure enough!

2nd Generation Intel® Core™
Processor Family Desktop
Datasheet – Volume 2
Supporting Intel® Core™ i7, i5 and i3 Desktop Processor Series

I don't have a Sandy Bridge, and no current plans for one, but maybe my dreams for AMD changes will come true

So yea, hopefully that's the one you're after!

[Artanis]

I dont know if this has ben asked before, I've searched in the last pages and found nothing:

Is there any plans for atom support?

I'm planning in purchasing a D510MO from intel and would love to be able to tweak and play arround with it.

[Sauron_Vie]

...yes I'm very busy at this time (and probably for a long time )
but I try to take some time for make a SD update, simply the
Intel datasheet report nothing about memory timings and other setting.
and I can't do nothing without it.

Not yet.. He is currently very busy

[bro20000]

Is memset out for sandybridge yet does anyone know!

[KURTZ]

hey guys, is there any update for the cpu tweaker that supports SNB?

[some_one]

I don't know about the other boards but on ASUS P8P67 EVO the timing registers appear locked by BIOS so that having access to them isn't going to help.