Quad Core OC Database

[Viss]

Any news on L731Bxxx yet? Cannot find anything meself...

[CraptacularOne]

Any news on L731Bxxx yet? Cannot find anything meself...

I haven't personally seen that stepping yet. So if you've got one crank it up and see what it will do

[billdavis]

Q6600 G0 - L723A795 - 4Ghz P stable - PC jinu117 - 1.485v - ASUS P5K Prem - by --------------billdavis

[CraptacularOne]

Updated again

@ billdavis, thanks for making it easy, a simple copy and paste is always appreciated

@ no_n|ck, I'm going by voltage needed. If you guys disagree, I'll move him up, but 4009Mhz is pretty much 4Ghz and he needed more voltage to get it stable than the others did

[no_n|ck]

@ no_n|ck, I'm going by voltage needed. If you guys disagree, I'll move him up, but 4009Mhz is pretty much 4Ghz and he needed more voltage to get it stable than the others did

At least put his chip infront of turtletrax & tintin resualts, as 8h vs 30min of Prime95 ... i bet his chip can do 30min of Prime95 @ 4ghz under 1.6v ...

[ThePrutser]

At least put his chip infront of turtletrax & tintin resualts, as 8h vs 30min of Prime95 ... i bet his chip can do 30min of Prime95 @ 4ghz under 1.6v ...

I thought this was an Q6600 OC database and not a ranking list

[CraptacularOne]

I thought this was an Q6600 OC database and not a ranking list

It is and that is why his result is staying where it is This is not a bragging rights thread just a data base of overclocks and voltages needed to get there his needed more voltage and thus is placed where it is at

[no_n|ck]

I thought this was an Q6600 OC database and not a ranking list

exactly, so thats why should the resualts be trasparent for someone whos looking for the right stepping ... i realy dont care as i have what i want, but from this point of view the turtletrax & tintin chips seams better on the table than are in reality ... nevermind, at least we have something here

[GripS]

Update:

I'll post an updated screen if i make it 8 hours. So far so good.

Special thanks to Dark79 for sharing his settings(that apparently work quite well!)

1.48v in BIOS. 1.43v load. What i like most is running @ 4:5 ratio on a P965 with a quad. Very cool.

Still using Air cooling (Scythe Infinity).

[CraptacularOne]

@ GripS, if you want me to add you to the list I'm going to need your FPO batch #

[GripS]

@ GripS, if you want me to add you to the list I'm going to need your FPO batch #

Heh.... You already have it bro. Just update my entry towards the bottom of the list.

[CraptacularOne]

Heh.... You already have it bro. Just update my entry towards the bottom of the list.

lol...sorry

[road-runner]

Q6600 GO @ 3402 Ghz
L726A855
TT Ultra 120 Extreme
1.55 bios set, 1.488 load
Gigabyte GA P35 DS3R

[ThePrutser]

@ GripS, if you want me to add you to the list I'm going to need your FPO batch #

Don't wanna be a nag, but don't ya need an 8 hour prime screenshot also? This screenshot shows 30 minutes only. I have seen entries denied with more details

[GripS]

Don't wanna be a nag, but don't ya need an 8 hour prime screenshot also? This screenshot shows 30 minutes only. I have seen entries denied with more details

Well... for this one 'technically' it doesn't need to be 8 hours. But i get your point. I actually killed that run after 4 hours and was shooting for 3.6ghz. I made it through 2 hours @ 3.6 before it rebooted on me . Gonna see if i can get away with upping the voltage a touch.

Updated screenshot with the prime95 run @ 4 hours(right before i killed it). Priming right now @ 3.6 with 1.5v in bios. So far @ 20 minutes.

[Fosco]

Q6600 GO @ 3708
L723A917
Water / Storm G4
1.48v load
PK5 Premium
1 hour smallFFT
OS = Vista 32bit

[CraptacularOne]

updated

[Supershanks]

1) Q6600 GO
2) FPO: L730B292
3) Cpu-Z Validation
4) 9x400 @4:5 1000

5) Water - D-Tek Fuzion
6) 1.375v (bios)
7) Asus P5k Deluxe

[pumbertot]

QX6850 G0 - L723A658 - 3.6Ghz P stable - D-Tek Fuzion WC- 1.36v - DFI LP P35 TR

[Evil]

1) Intel Core 2 Quad Q6600 G0
2)L734A
3)http://valid.x86-secret.com/show_oc.php?id=255411

5)Watercooling- Swiftech Apogee
6)Vcore 1,475v in Bios
7) Asus P5K-E
Haven´t seen any results with this week but doesn´t look too bad. 24/7 is average but with 10c ambient and 1,625v vcore used ja managed to run 3dmark06 at 4052mhz which is a lot better than my old E6700.

[Viss]

1) Q6600 G0
2) L731B163
3) Tuniq Tower
4) Maximus Formula SE
5) Vcore bios 1.525 >> 1.42 windows load (load calibration doesnt work with this bios)

Wil update with validation, forgot to upload the file. Only one hour but for me thats more then stable



Idle:

[ThePrutser]

Nice oc! Do you also use it on 3.8, or was it only for the OC sake?

[CERO]

• Q6600 "g0"
• L726A951
• VID: 1.2875v
• P5K Deluxe [bios 0311]
• 3600mhz @ 1.408vcore prime stable Small FFTs 12h 40min
• Thermalright Ultra-120 Extreme [52-54c during load]
• Crucial Ballistix Pc6400 800mhz 4-4-4-12 [1:1 divider]

[Snake_Eyes]

I see many posts thats get 3,6 Ghz with a Q6600 and a P5K motherboard.
I have the Asus P5W DH Deluxe and i dont get the 3,4Ghz.
So does the P5K better overclock the Q6600 G0 than the P5W DH Deluxe ?
I got the same VID as you mc2k i have 1.2875v to..

[CERO]

I see many posts thats get 3,6 Ghz with a Q6600 and a P5K motherboard.
I have the Asus P5W DH Deluxe and i dont get the 3,4Ghz.
So does the P5K better overclock the Q6600 G0 than the P5W DH Deluxe ?
I got the same VID as you mc2k i have 1.2875v to..

I do think personally think the P35 would help for sure overclocking Quads. Altho I never owned a p965/975/i680, but I saw many people improved their O/c by going to p35, another thing all cpu are unique in their way of overclocking, and it seems there is no correlation with low VIDs and better O/c with the Q6600 g0, unlike those old famouse low vids E6600