Xtreme Twinmos Memory!

[largon]

argh u guys are killing me with this ch5 bh5.This mem worst i ever bought,but for the money hey ok.I ate this stuff and its bh5.My freind proved it to me as we put them together.IN my opinion, wich is whatever.spend like 10 more euros or 15$ more and get some mem that runs.This is the second and last time i buy this mem.Sry to disapoint u guys getting low timingns and high fsb from this stuff.I have had no luk with this stuff
--

2,958+ replies, 129,300 views - all for nothing!
Oh well.

1AA4t <---------::{ GOD ihate u ;-)

1A4T is the BH-UTT. (...or was that a misstype?)

[slunge]

given the choice, and ive had both now (CH5/BH5 UTT) i would stick with the ch5 i have now every time

[gundamit]

Well I tried putting in both the TMSP CH and the BH UTT and it actually seems to to be showing a bit of promise. Set everything to auto except
CAS = 2
DRAM Bank Interleave = Enabled
DRAM Drive Strength = Level 8
DRAM Data Drive Strength = Level 4
Max Async Latency = 8ns
Read Preamble Time = 6ns
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(8burst)

I guess I will be playing with it over the weekend. I might have to go with this instead of a 2x1024 set-up. I'm liking the 3v but just like the Geil 2x1024 pair I tried I can't use a divider lower than 3:4.

[mitgsx]

I must be lucky, SP BH-5 3200 2 x 512 @ 245 3.25v. They will go higher, just cpu memory controller won't.

[Garrett]

I must be lucky, SP BH-5 3200 2 x 512 @ 245 3.25v. They will go higher, just cpu memory controller won't.

Mine top out @ 265 @ 3.45v
Running @ 260 24/7 is no problem, a 12cm Enermax fan pointed at them @ 2 inch distance, 1500rpm... very quiet but still good airflow

Best bang for the buck

[gundamit]

I must be lucky, SP BH-5 3200 2 x 512 @ 245 3.25v. They will go higher, just cpu memory controller won't.

Drop the multi down on the CPU and see if you can crack 250@3.3v.

Mine top out @ 265 @ 3.45v

Right up there with the premium OCZ and Mushkin CH UTT. Could you share your bios timing?

Wont the vencie let u do 1t with 4 dimms?

Before they came out, it was hoped the E revisions CPUs (San Diego and Venice) would do just that. Although they won't kick down to DDR333 speed when 4 dimms are used like the Winnies, I believe they still run 2T with four sticks. Memory controllers are improved on them, allowing for higher OC's overall, but you lose a bit of bandwidth clock for clock because of looser latencies on the new memory controller.

[nugzo]

Well I tried putting in both the TMSP CH and the BH UTT and it actually seems to to be showing a bit of promise. Set everything to auto except
CAS = 2
DRAM Bank Interleave = Enabled
DRAM Drive Strength = Level 8
DRAM Data Drive Strength = Level 4
Max Async Latency = 8ns
Read Preamble Time = 6ns
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(8burst)

I guess I will be playing with it over the weekend. I might have to go with this instead of a 2x1024 set-up. I liking the 3v but just like the Geil 2x1024 pair I tried I can't use a divider lower than 3:4.

v
Wont the vencie let u do 1t with 4 dimms? i noticed your poor old winnie will only let u do 2t.