So are we going to see E-core FX-55 this month or not?
So are we going to see E-core FX-55 this month or not?
Asus P5N-T Deluxe (JUNK)
EVGA 8800GTX
Core 2 Duo E6600
4 gig Gskill 6400PHU2-2GBHZ
Creative X-fi gamer
Corsair HX620 power supply
Thanks for the heads up look...
I think 32" sounds pretty good for a bone stock cpu/mem ... this should be spot on with fx55 performance then shouldn't it?
Last edited by isp; 03-06-2005 at 04:56 PM.
steven, he knows that! hes the author of CBIDOriginally Posted by STEvil
he was referring to the HT related instructions in SSE3 wich have been speculated to get adopted by amd to regulate/control the two physical cores like intel controls the two virtual cores in ht with them.
if you wait a week you should knowOriginally Posted by Gitsum
SAE just got a confirmation that the fx55 he ordered in a german shop finally arrived and was sent out to him, i hope its an e3 core, very likely though as i dont think that shop ordered old 130nm stocks from somewhere.
Well since there have been ppl getting like 0507 130nm FX-55's I'd say the chance of getting a 90nm now are rather slim.
- i7 5820K | Asus X99 Deluxe | 16GB Corsair Vengeance LPX | eVGA GTX 970 SC SLI | Asus PB278Q | 250GB Samsung 840 | 11TB HDD Storage | Steel Series Rival & QcK+ | Razer Orbweaver & Black Widow Ultimate '14 | Corsair RM1000W | Win 8.1 -
- Ek Supremacy Nickel | Alphacool NexXxos UT60 360MM | Coolgate UHE 360MM | Bitspower Water Tank Z-Multi 150 | EK D5 CSQ Top | Alphacool VPP D5 | Corsair SP120 HP's | Corsair 900D | Xbox One & PS4 | Sharp Aquos Q 60" | Astro A50 -
~ Gone but never forgotten: Xtreme Legend - Hallowed Point - Enthusiast - Bencher - Friend ~
FX-55 = 130nmOriginally Posted by saaya
90nm = FX-57 = 90nm E0
Oh, woops :POriginally Posted by saaya
Thats funny.. donnie and saratoga couldnt stop telling me that doing something similar (ie: the exact same, in hardware) is wrong..he was referring to the HT related instructions in SSE3 wich have been speculated to get adopted by amd to regulate/control the two physical cores like intel controls the two virtual cores in ht with them.
That'd be niceif you wait a week you should know
SAE just got a confirmation that the fx55 he ordered in a german shop finally arrived and was sent out to him, i hope its an e3 core, very likely though as i dont think that shop ordered old 130nm stocks from somewhere.
Last edited by STEvil; 03-07-2005 at 01:47 AM.
All along the watchtower the watchmen watch the eternal return.
if that the heatspreader?Originally Posted by sxs112
looks a lot different
Got a fan over those memory sticks? No? Well get to it before you kill them
nifty. i like the new box.
Got a fan over those memory sticks? No? Well get to it before you kill them
Excuse me... I need to go change... umm, seems like a release is imminent just a matter of how many weeks.Originally Posted by sxs112
thats just awesome, thanks very much sxs, are those both 4200+'s?
Looks great. Any overclocking results yet?
NZXT Tempest | Corsair 1000W
Creative X-FI Titanium Fatal1ty Pro
Intel i7 2500K Corsair H100
PNY GTX 470 SLi (700 / 1400 / 1731 / 950mv)
Asus P8Z68-V Pro
Kingston HyperX PC3-10700 (4x4096MB)(9-9-9-28 @ 1600mhz @ 1.5v)
Heatware: 13-0-0
Originally Posted by c627627
No, the 4200+ is not a Q4 product. It was shown on older roadmaps as an early Q3 product. Moved forward perhaps due to success with Rev E 90nm parts.
Nah... that's the packaging AMD gives out to employee's and testers for their "beta" chips.Originally Posted by ozzimark
I used to know a guy who'd get a trunk load from of them from AMD and give them out to people as kind of a promotion.
That was way back when though... it appears the package them the same though.
GigaByte EP45-DS3R
Intel Q9650 @ ???ghz 9 x ??? 1.35v ~ 1x120mm W/C
2 x 2gb Patriot EP PC2-6400EL @ 1:1 2t 5/5/5/12 2v
Evga 9800Gx2
2 x 74GB Raptor Raid 0
PPC&C 750W SSI
Dell 2005FPW
Cooler Master 590
Will this cpu have a newer, improved revision of the memory controller? that is better then whats with the winnies?
Rig 1: AMD 64 3700+ SD DFI nForce4 LanParty Ultra D | OCZ 2x1GB PC4000 GOLD | OCZ Modstream 520w | Albatron 7800GTX
Rig 2: AMD 64 X2 4400+ - Asus A8n-SLI - 2GB OCZ Value VX - Antec Phantom 500w - eVGA 6600GT
Heres fx57 which will be available from this Canadian retailer next week (only 6 pcs.) Price still TBD...
That is of course, what we are all hoping for. I'm fairly certain they will, but you never know.Originally Posted by Orker
off-topic, what's with 400+ veiwers on this board, I've never seen it that high.
other sites are probably linking to this thread.. i know there's one on the forums at [H], but that probably accounts for like 2 of those people
either way, i'm getting really anxious to see overclocking results of this and the turion
Got a fan over those memory sticks? No? Well get to it before you kill them
How much do you think the FX57 will retail for? Or will it retail around 899 and the price of 55s will drop? I'm anxious to buy, but not anxious to pay well above 1k for it...
I'm willing to bet it will play out like when the FX-55 came out. The FX-55 will be rebadged the 4200+, but with locked multi, and the FX-57 will be the lone FX chip in production. (This is assuming the FX-55 comes out in 90nm form before the FX-57 release, I doubt the 4200+ will be clawhammer)Originally Posted by quicksilverXP
That retailer has the "FSB" (i.e. Hypertransport) speed wrong. FX parts have been 1GHz since 939 launched, and the FX-57 will be no exception.Originally Posted by Dumo
We got linked by theINQ: http://www.theinquirer.net/?article=21646Originally Posted by Orthogonal
Sorry, I couldn't help making this thread recursive... enjoy reading an article that is a summary of this thread!
there are also 90nm fx55 chips afaik, am i wrong?
Originally Posted by computersmsa
Bookmarks