Here a small update:
MSI NEO4 ULTRA 1.2B
2700MHz @1.55v @BOXED AIR.
Under Prometeia MACH 1 R507 (DISPLAY= -43)
This is prime stable, but my HTT is crap at that speed. Sometimes I get BSOD.
Here a small update:
MSI NEO4 ULTRA 1.2B
2700MHz @1.55v @BOXED AIR.
Under Prometeia MACH 1 R507 (DISPLAY= -43)
This is prime stable, but my HTT is crap at that speed. Sometimes I get BSOD.
i have it 1 day[1.36b] only man still searchingOriginally Posted by vlad
. . .
I need good memory to push my winnie above 2.8ghz@ 1.6vcore
my memory is noname 512*2 dual . at 210 craps , and 323htt hits the wall , no divider works ,,,....
at 2.9~ with my horrible sticks is only printscr stable
my winnie map is
undervolted[from bios] till 2.6ghz [1.37vcore 1.40]
default vcore[from bios] [1.44~] does 2.7ghz
and above 310*9 2790 ask to much [the memory i think ]
Last edited by Athens[2004]; 02-12-2005 at 04:14 PM.
Lots of great overclocks here. It's so intersting how much these chips can vary even on same week.
- i7 5820K | Asus X99 Deluxe | 16GB Corsair Vengeance LPX | eVGA GTX 970 SC SLI | Asus PB278Q | 250GB Samsung 840 | 11TB HDD Storage | Steel Series Rival & QcK+ | Razer Orbweaver & Black Widow Ultimate '14 | Corsair RM1000W | Win 8.1 -
- Ek Supremacy Nickel | Alphacool NexXxos UT60 360MM | Coolgate UHE 360MM | Bitspower Water Tank Z-Multi 150 | EK D5 CSQ Top | Alphacool VPP D5 | Corsair SP120 HP's | Corsair 900D | Xbox One & PS4 | Sharp Aquos Q 60" | Astro A50 -
~ Gone but never forgotten: Xtreme Legend - Hallowed Point - Enthusiast - Bencher - Friend ~
Yeah, burn in is nice! Mine stopped at 258*9 1,4, now its up to 268*9 1,4 Prime95 stable. Hell, those 9 hours of prime every day help
d@rkn1k0 - I hate you
I don't know I hate sandra
Xeon 3060 L631B115 max 4680 superpi SS 10.904
Asus P5B deluxe + vdrop vcore vddr2 vmch mods
2x1go crucial ballistix pc8000
2x1go crucial ballistix pc6400
8800 gts 320 // x800xl // 9250 pci
corsair hx 620 // seasonic s12 500
DOD chilly1 R402a
watercooling // zalman9700
Yesterday i have buyed a new winchester. The stepping is 0448 rpmw. 2300 1.4v is prime stable more mhz is dosen´t stable. 2400Mhz 1.5v i become a error message after 15mins.
My friend has buyed a 0448 spaw and the cpu runs over 2,8ghz with 1.53v on prime. I hat this guy ^^
Another from my week 48 SPAW on the DFI
After hours of stress at 2.7 1.44vcore , my winnie now does 2.8 at 1.57~ vcore
[1.575 from bios]
the only part i miss is ocz el rev2
Glad to hear it bro!
any faster winnie out there ?
Thanx mateGlad to hear it bro!
a few answers now from your question about 1.36b.
1. I flash it from win [because im not trust my floppy] with no prob with winflash 1.0.0.1 [award]
2. 1.36b is more stable at high fsb .
3. It has new choises in vcore section . +13% +15% +18% !!!!
4. The bug from previous bios 1.4 we have that when you press enter 2 change multiplier the bios freezes [the only way was with pup pdown] is desapear .
and searching.
Outstanding
the vcore at cpuz is rightor shows slower ?
whats your memory ?
for air , or water you was previous whats the number of mhz bonus of the -60?
Cpu conditioning (burn in) works with a64 winchesters?After hours of stress at 2.7 1.44vcore , my winnie now does 2.8 at 1.57~ vcore
[1.575 from bios]
the only part i miss is ocz el rev2
this just arrived!
ADA3200DIK4BI
CBBID 0501DPFW
1182947A50613
i hope its a decent one!
ASROCK 970 Extreme 3 // FX-6200 @ 4.65 (245x? 64bit os) 1.45v,2200 nb/HT //8GB Mushkin DDR3 @833 8-8-8-24 cmd1 1.55v // HD7850// Silverstone 650w // ~32inch portal // WDgreen and blue // Kingston v300 120GB SSD // watercooled with Swiftech storm rev2, Fez 240 , 655 pump not packed into a Corsair Obsidian 650D///
CBBID suXXXXX
i2600K / P67A-UD5 rev 1.00
not sure so far 2.6 seems to be my ceiling testing now @ 277 x 9.5 1:1 4x HTT
CBI reports the chip to be .09 SOI?
ASROCK 970 Extreme 3 // FX-6200 @ 4.65 (245x? 64bit os) 1.45v,2200 nb/HT //8GB Mushkin DDR3 @833 8-8-8-24 cmd1 1.55v // HD7850// Silverstone 650w // ~32inch portal // WDgreen and blue // Kingston v300 120GB SSD // watercooled with Swiftech storm rev2, Fez 240 , 655 pump not packed into a Corsair Obsidian 650D
Sorry, I haven't read the whole Thread
Is there anywhere information about the best steppings for Winnies?
Thx!
Interesting.. very interesting this burn in thing..Yes i do. A week ago i couldnt boot any higher then 9x317 and it wasnt stable at all now i can work in windows but cant bench at 9x323.
...
how do i burn in a winchester with msi k8n neo2 platinum and xp-120??
Venice 3000+
MSI K8N Neo2 Platinum
2x512 OCZ EL Platinum Rev.2
Powercolor x800 pro ViVo @ XT PE 16 Pipes
OCZ 520W PSU
high-end watercooling
2.7GHz Stable on Air... 1.6VCore
256MB of Corsair XMS3700 (2.5-3-3-10, DDR333)
yeah so far 2.6 seems to be TOPS even with me cooling @ 18-20c. my max vcore is 1.7 with this board. at least it doesnt mind very high FSB's
ASROCK 970 Extreme 3 // FX-6200 @ 4.65 (245x? 64bit os) 1.45v,2200 nb/HT //8GB Mushkin DDR3 @833 8-8-8-24 cmd1 1.55v // HD7850// Silverstone 650w // ~32inch portal // WDgreen and blue // Kingston v300 120GB SSD // watercooled with Swiftech storm rev2, Fez 240 , 655 pump not packed into a Corsair Obsidian 650D
What can be expected with an XP-90 with Tornado and a winnie 3500+ on an K8N Neo2?
My 3500+ is doing 2.62 GHz with 1.7v stable, is that nice?
Athlon 64 3500+ at 2.6 GHz
with Thermalright XP-90 + Tornado
ELSA Radeon X800 Pro at XT
with Arctic Cooling Ati Silencer 4
MSI K8N Neo2 Platinum
1 GB Corsair TwinX 3200XL Pro
at 1:1 248 MHz 2.5-3-3-10-1T
Audigy 2 ZS Platinum Pro
Xaser III V2000A with Enermax
UC-A8FATR4 & Vantec Nexus 205-SL
PC Power & Cooling Turbocool 510 Dlx
so today i get my new 3000+ 0443mpm
Ã:banana:´m very lucky with this little cpu
No Overlocking Today
New top SuperPi Scores. Beaten old scores by using longhorn!!!
Enjoy!
Alec
Posting Permissions
Reply With Quote
Bookmarks