The stuff is being send to a german roommate of mine, to save some shippingcosts. The mem will probably arrive there this week (i ordered friday), so i'll have it mondayOriginally Posted by TEDY
@Eljefe62, overclockers.de is having a good time selling twinmos right now
they had 2 shipments of 1gig speed premium aa4t and 44D chips and 2 shipments of single 512mb modules aa4t and 44D chips.
so you'll be hearing more from european users
Last edited by Jack; 01-18-2005 at 08:03 AM.
oh jack that's almost a week :P
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
Pïcked up mine today (they arrived at my aunt's place on friday, but didn't have the time to pick them up.)
Waiting for my Booster to arrive, hopefully tomorrow.
Here's some pics :
Rig #1
Gigabyte P67A-UD4 trying to figure out this POS board
2600k @ ?????
2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
ATI 5850
Coba Nitrox 750W
Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top
Rig #2
DFI UT P35-T2R (0317 bios)
E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
2x2Gb Chaintech Apogee GT PC2-8500
Powercolor 4870
Corsair 520HX
Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump
I've got Supermicro boards that lasted longer than one of my marriages!
i know
haven't got time to test them this week tho'
have to study, have exams to pass...
looking good
lets us know what the mem does
Last edited by Jack; 01-18-2005 at 08:09 AM.
I tried seeing how much it would be from Akiba (I think?) and it would have been $260, plus shipping (from Japan?)... =outrageous for some normally $160 memory here...
PII x4 970 (watercooled w/DTek Fuzion custom setup), ASRock 890fx deluxe4, adata extreme 1600X 2x2gb, 4870x2.
e8600 @3.6GHz, gigabyte ep45t-extreme, and H50 cooler for media machine.
akiba asks a high price for their twinmos because they're pretested.
they all do 240+ MHz
and you're right about the price: $260, w/o shipping from finland.
At cheap stores in europe the twinmos is still 160 euro = $208 w/o shipping
TEDY, Jupiler bought his twinmos from overclockers.de,
just like i did
Last edited by Jack; 01-18-2005 at 08:35 AM.
jupiler where did you get them ?
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
Like Jack said, http://www.overclockers.de
Rig #1
Gigabyte P67A-UD4 trying to figure out this POS board
2600k @ ?????
2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
ATI 5850
Coba Nitrox 750W
Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top
Rig #2
DFI UT P35-T2R (0317 bios)
E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
2x2Gb Chaintech Apogee GT PC2-8500
Powercolor 4870
Corsair 520HX
Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump
I've got Supermicro boards that lasted longer than one of my marriages!
excellent!!
gonna order 10x dual packs...so 20 sticks
LOL
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
TEDY, you are overcompensating. You might want to upgrade the rest of your system to get IT out of these sticks...
You were not supposed to see this.
Nice sticks Jupiler
for the dutch people:
they are available in Belgium!!
i found 2 sticks of 256mb and 1 of 512mb @ loveno, i bought their last ones ( the 256 sticks ) and they are mtec 50D's
3200 winchester / 2*256 winbond UTT Mtec 50D - 2*256 Twinmos BH-5 - 1*256mb Corsair XMS 3500v1.1 BH-5 / EP-9NDA3+ Vdimm modded / R9800NP
i agree i think your BH-5 would do even better.TEDY, you are overcompensating. You might want to upgrade the rest of your system to get IT out of these sticks...
so UTT not good for NF2 ? well i'm not dying to get 250 out of them ...just some 230 2-2-2-x 2*512 will be enough till i switch to NF4 soon
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
gimme 1 pair would you
tictac, give me a uber 1337 an7 bios! :P (not that enduracell is doing a bad job... but u could help him! :banana4: )
TEDY , UTT is fine at NF2. if u want to buy it only to get 2x512 i think u do well. if u are just looking for performance... damn u got BH-5 urself mate.
Last edited by enok; 01-18-2005 at 02:08 PM.
AMD M 2500+ AC # 3523+ @ 1.75v «» Abit AN7 v1.0 fully AC # 242mhz @ 1.75v «»
TwinMOS UTT 2x512MB PC3200 # 2-2-2-11 @ 3.10v «» Chaintech GeForce 4 Ti4200 @ stock & w8ting for lapping
i know what that i have BH-5 but only 2*256....really want 2*512 but want some cheap UTT
Cause 512MB used BH-5 is still 110-130$ ...too much.
enok : you got twinmosutt ?
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
i just got my speed premium yesterday .... i put them in , set on 3,3v and started testing with 250 11-2-2-2 @ a DFI Infinity with some dirty XP-M .... :banana4: now it runs nearly 2days @ Load without any error .. @ weekend its time to burnso UTT not good for NF2 ? well i'm not dying to get 250 out of them ...just some 230 2-2-2-x 2*512 will be enough till i switch to NF4 soon
edit: i just paid 127€ for 2x512mb selected Speed premium with UTT chipsdirectly from twinmos germany :p
Last edited by $ilver; 01-18-2005 at 02:31 PM.
AMD 3700+ KAB3E 0546 GPMW @ 300*10 | DFI nF4 Ultra-D | 2x512 TwinMOS Speed Premium 400 - UTT|MSI 7800GT @ 515/1200| Antec Phantom 350 | Alphacool NexXxos XP | Mora 2 | Innovatek HPPS
Nice clocks.
Are those 2*256 or 2*512MB sticks?
Good to see ya around, $ilver.
Rig #1
Gigabyte P67A-UD4 trying to figure out this POS board
2600k @ ?????
2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
ATI 5850
Coba Nitrox 750W
Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top
Rig #2
DFI UT P35-T2R (0317 bios)
E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
2x2Gb Chaintech Apogee GT PC2-8500
Powercolor 4870
Corsair 520HX
Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump
I've got Supermicro boards that lasted longer than one of my marriages!
OK
i just got my speed premium yesterday .... i put them in , set on 3,3v and started testing with 250 11-2-2-2 @ a DFI Infinity with some dirty XP-M .... :banana4: now it runs nearly 2days @ Load without any error .. @ weekend its time to burn
edit: i just paid 127€ for 2x512mb selected Speed premium with UTT chips
CPC off i assume?
Will those that already have UTT please post their experiences in my thread here:
VX/UTT Voltage Scaling, please contribute...
Cheers
VX/UTT Voltage Scaling, please contribute...
10x260 _ 1T-2-2-2-8-7-15 _ 3.3vDIMM _ 1.75vCORE
Mobile 3400+ CG 0437XDPW
DFI LanParty UT
XP120 w/ 120mm Thermaltake Thunderblade
2x512MB OCZ VX
BBATI 9800np w/Infineon
PC Power & Cooling 510w Deluxe
wow auto notified at 6 am on newegg, checked at 6pm, all gone. next eta 1-22. Well, at least the chances are better now. Who the hell is buying all the sticks from newegg? No one here's gotten any :P
Last edited by fareastgq; 01-18-2005 at 05:39 PM.
ALIENS are bringing my next kentsfield based rig in a UFO case!
everything new (from newegg) is suposed to be AA4T, or... atleast that is the theory, correct?
hmmm, the 22nd is a saturday... guess i'll be getting up early.
got mine today (2x512) and they were aa4t's.everything new (from newegg) is suposed to be AA4T, or... atleast that is the theory, correct?
hmmm, the 22nd is a saturday... guess i'll be getting up early.
Posting Permissions
Reply With Quote
Bookmarks