Anyone use an Ultra X-Connect PSU?

[Waisztarroz]

i eagerly await your results, im considering one in the future possibly. btw, if you look at that +12v rating, it's 34 amps right? 12x34 = 408 watts...that's not gonna happen, it's overrated. the psu is 500 overall, and that's the total of all the rails, there's no way that unit will hold up with a 34 amp draw on the 12v line

Will do, then. It may be a little while... if you see my thread in the AMD forum, you'll see that I'm awaiting nforce 4 before I put my phase change system together. Still, I could test the X-Connect in my current system, presently powered by a 430W Enermax.

Even my Enermax lists its power rating at lower than the sum of all the rails. I believe this may be standard practice... the Amperage ratings are the maximum possible draws, right? So if it had 34A it would have very little left for the +5V and +3.3V rails? I agree, it seems very unlikely that a power supply at that cost could handle so much +12v load. I am rather skeptic. I suppose I shall see when I put it to the test.