It was a good run but looks like XS is a dead forum.
It was a good run but looks like XS is a dead forum.
Seasonic Prime TX-850 Platinum | MSI X570 MEG Unify | Ryzen 5 5800X 2048SUS, TechN AM4 1/2" ID
32GB Viper Steel 4400, EK Monarch @3733/1866, 1.64v - 13-14-14-14-28-42-224-16-1T-56-0-0
WD SN850 1TB | Zotac Twin Edge 3070 @2055/1905, Alphacool Eisblock
2 x Aquacomputer D5 | Eisbecher Helix 250
EK-CoolStream XE 360 | Thermochill PA120.3 | 6 x Arctic P12
The one-eyed man rules the land of the blind people :p
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero
I've been a very long time lurker. For the longest while I couldn't reset my password properly so i went to a read only mode.
I miss all of the awesome technical info. this site had coming in new for more complex things like cascade cooling, or some of the advanced knowledge you'd find on ES overclocking (Yes I know - not great for the long term relationships with chip makers). Some day I'll build a cascade cooler, or at least a water chiller setup..
Perhaps an attempt with less forums and more concentrated info. might get something going with a smaller than historical group? Sites like RealworldTech or even Semiaccurate Forums bring some pretty deep technical people together without any large amount of activity daily.
Ok this my reason to join XS. I modded my first 9700pro and don't want to tell the result . 15 years... I am married for only 12 years. You are like my family... no you are actually a part of my family. I am here until site is completely down. And my only wish is to see one of you in real life...
Thank all of you who read this or not...
When i'm being paid i always do my job through.
Why i cant for screenshot
When i'm being paid i always do my job through.
Its kinda lika a town after some kind of apocalypse, not many people left. But the ones that are, are tough ;-)
Intel 5960X@4.2Ghz[Prime stable]@4.5 [XTU stable] 1.24v NB@3.6ghz Asrock X99 Extreme 3 4x8GB Corsair Vengeance@3200 16-17-17
Sapphire nitro+ VEGA 56 Samsung SSD 850 256GB Crucial MX100 512GB HDD:WD10TB WD:8TB Seagate8TB
XS till has a ton of search engine traffic with over 600 people online now.
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
just wanted to comment this place really has been a home for my inner warranty voider and the importance of communities like this can't be stressed enough. Thanks for all the great years and even though the site seems to have been slowing down I'm here until it 404's. Cheers to all of you
The Crunching community isn't what it used to be either...
World Community Grid http://www.xtremesystems.org/forums/...ity-Grid-(WCG)
All the different Distributed Computing projects http://www.xtremesystems.org/forums/...treme-DC-Vault
Some of us are still going strong, but we could always use more help. Come on, bring those bada$$ systems and help out!
https://stats.free-dc.org/teambycpid/XtremeSystems
24/7 Cruncher #1
Crosshair VII Hero, Ryzen 3900X, 4.0 GHz @ 1.225v, Arctic Liquid Freezer II 420 AIO, 4x8GB GSKILL 3600MHz C15, ASUS TUF 3090 OC
Samsung 980 1TB NVMe, Samsung 870 QVO 1TB, 2x10TB WD Red RAID1, Win 10 Pro, Enthoo Luxe TG, EVGA SuperNOVA 1200W P2
24/7 Cruncher #2
ASRock X470 Taichi, Ryzen 3900X, 4.0 GHz @ 1.225v, Arctic Liquid Freezer 280 AIO, 2x16GB GSKILL NEO 3600MHz C16, EVGA 3080ti FTW3 Ultra
Samsung 970 EVO 250GB NVMe, Samsung 870 EVO 500GBWin 10 Ent, Enthoo Pro, Seasonic FOCUS Plus 850W
24/7 Cruncher #3
GA-P67A-UD4-B3 BIOS F8 mod, 2600k (L051B138) @ 4.5 GHz, 1.260v full load, Arctic Liquid 120, (Boots Win @ 5.6 GHz per Massman binning)
Samsung Green 4x4GB @2133 C10, EVGA 2080ti FTW3 Hybrid, Samsung 870 EVO 500GB, 2x1TB WD Red RAID1, Win10 Ent, Rosewill Rise, EVGA SuperNOVA 1300W G2
24/7 Cruncher #4 ... Crucial M225 64GB SSD Donated to Endurance Testing (Died at 968 TB of writes...no that is not a typo!)
GA-EP45T-UD3LR BIOS F10 modded, Q6600 G0 VID 1.212 (L731B536), 3.6 GHz 9x400 @ 1.312v full load, Zerotherm Zen FZ120
OCZ 2x2GB DDR3-1600MHz C7, Gigabyte 7950 @1200/1250, Crucial MX100 128GB, 2x1TB WD Red RAID1, Win10 Ent, Centurion 590, XFX PRO650W
Music System
SB Server->SB Touch w/Android Tablet as a remote->Denon AVR-X3300W->JBL Studio Series Floorstanding Speakers, JBL LS Center, 2x SVS SB-2000 Subs
I do miss the hyper activity. And the watercooling projects. And just a bunch of nerds.
Even the petty arguments... Sometimes
The Cardboard Master Crunch with us, the XS WCG team
Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64
I know the news slowed down from Stym, but this post makes it sound like there was some sort of news of a shut down? I sure hope not... I learned a lot from here back in the day... and I still check this news forum frequently.
Only reason why I haven't been actively posting is because the site is no longer "https" certified, how come? Why isn't the connection secured anymore for our logins?
This forum is truly special... I recall back in the day... even felt horrible to hear that movieman had passed... it truly was like a family here.... a family of rather technical people, a family of technology enthusiasts who made the latest and greatest CPU's/GPU's/Chipsets/Ram even faster and more bleeding edge with overclocking... it was like a forum of "elites" in the genre, all hanging out and conversing. I came here from the anandtech forums back in the day, anandtech had too many people with high ego's yet clearly didn't know what they were talking about... yet whenever I came here, everyone was "on-point" or willing to learn, teach, and debate in a somewhat respectful and educating manner. The community got together to share and find solutions to their overclocking "needs".
I keep my sig the same for nostalgia, even though that machine isn't running anymore... back when DFI lanparty boards were all the rage.
Last edited by turbox997; 09-04-2018 at 03:56 PM.
-Cpu:Opteron 170 LCBQE 0722RPBW(2.87ghz @ 1.300v)
(retired)Opteron 146 (939) CAB2E 0540
-Heatsink: Thermalright XP-90
-Fan:120mm Yate Loon 1650 RPM @ 12V, 70.5 CFM, 33dB
-Motherboard: DFI Lanparty nF4 UT Ultra-D
-Ram: Mushkin High Performance blue, 2gigs(2X1gig kit) PC3200 991434
-Hard drive: Seagate 400GB Barracuda SATA HD 7200.10(AS noisey model)
-Video card: evga 6800GS @520/1170
-Case: P180
-PSU:Enermax 535Watt EG565P-VE FMA (24P)
I'm forced to lesser forums now for activity but I still come here daily...
7820X | Asrock X299 Taichi XE | Gigabyte 1080 Ti Xtreme | 32GB Memoriez | Corsair HXi1000 | 500GB 960 Evo
I love this forum even though I had some disagreements over my 12 years with a few far left types. I've gained much knowledge here and voided many warranties with it. I've donated all my used hardware over those 12 years to young people with bright futures and encourage others to do the same.
Thank you Mr Wirth for all your time and hard work as well as those who contribute to the forum. Lets make it 12 more years.
Still come here almost daily, just with the hope in my heart.
We are here, just kinda in that point in life where we have our toys, I am working on a project I will for sure add to watercooling and OC sections, still waiting on a few things though.
https://1drv.ms/u/s!AicSk7fcxgN8gdpxbq0SBBirO0DIbQ
Still trying to live up the xtreme, even at 48 years of age
[img] tags do not seem to be functioning for me
Last edited by linflas; 09-04-2018 at 08:07 PM.
Q6600 @ 3.6, cheap water cooling, and crunching 24/7
At last I managed to insert my sc . This was my first activity on XS.
When i'm being paid i always do my job through.
I still check out the site around once or twice a month..
Yeah it has been slowing down, it's not like it used to be.
I'll continue to lurk and post once in a great while.
Those time is less interesting hardware too. That can explain why.
Nice bro. The xp-120 was a beast. Haha, as for fitting a 120mm fan on an xp90, I used wire tie downs to "mount" it on to the xp90, had awesome results for it's time... I was running like 2.87ghz 72 hours stable on prime 95 on my opteron 64.
It's also nice to see a lot of familiar handles still on here from back in the day too, even if we didn't interact much directly, good to see familiar names still active. Charles (glad you're ok man, saw on the other board regarding your health issues) aka "fugger", madcho, dengyoung, sparky, BenchZowner, and many others... I recall a few others that I don't see anymore ( nn_step, synthetickiller, and a few more... I remember their avatars, haha... it's been a while.... and I've been through some things in life myself and I'm thankful to still be around...stay safe and well everyone!)
I remember when Charles would be doing events in Vegas and there would be threads on it, he'd invite the forum there basically, and some members would fly out there to attend.. man I really wish I could've gone out too.
-Cpu:Opteron 170 LCBQE 0722RPBW(2.87ghz @ 1.300v)
(retired)Opteron 146 (939) CAB2E 0540
-Heatsink: Thermalright XP-90
-Fan:120mm Yate Loon 1650 RPM @ 12V, 70.5 CFM, 33dB
-Motherboard: DFI Lanparty nF4 UT Ultra-D
-Ram: Mushkin High Performance blue, 2gigs(2X1gig kit) PC3200 991434
-Hard drive: Seagate 400GB Barracuda SATA HD 7200.10(AS noisey model)
-Video card: evga 6800GS @520/1170
-Case: P180
-PSU:Enermax 535Watt EG565P-VE FMA (24P)
Seasonic Prime TX-850 Platinum | MSI X570 MEG Unify | Ryzen 5 5800X 2048SUS, TechN AM4 1/2" ID
32GB Viper Steel 4400, EK Monarch @3733/1866, 1.64v - 13-14-14-14-28-42-224-16-1T-56-0-0
WD SN850 1TB | Zotac Twin Edge 3070 @2055/1905, Alphacool Eisblock
2 x Aquacomputer D5 | Eisbecher Helix 250
EK-CoolStream XE 360 | Thermochill PA120.3 | 6 x Arctic P12
Extreme OC isn't how and what it used to be anymore.
That's the main reason things are slowing down on any extreme overclocking focused website/forum.
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero
Seasonic Prime TX-850 Platinum | MSI X570 MEG Unify | Ryzen 5 5800X 2048SUS, TechN AM4 1/2" ID
32GB Viper Steel 4400, EK Monarch @3733/1866, 1.64v - 13-14-14-14-28-42-224-16-1T-56-0-0
WD SN850 1TB | Zotac Twin Edge 3070 @2055/1905, Alphacool Eisblock
2 x Aquacomputer D5 | Eisbecher Helix 250
EK-CoolStream XE 360 | Thermochill PA120.3 | 6 x Arctic P12
This was where I really learned how to overclock and not be scared to push cpus.
I always assumed the drop off was that there was less of a need to overclock these days. Stock CPUs keep pushing towards clocks that 5 years ago were only achievable with custom loops. I was hoping AMD's new chips were going to spur some hardcore overclocking to match Intel clock for clock, but it hasn't happened, yet.
When this forum had very high activity was one of my favorite times for overclocking. Every CPU that launched seemed an excited new adventure & I couldn't wait to see how far people pushed them. Overclocking now seems like more of a glamour trend to "justify" pretty loops. I miss those days.
Bookmarks