Quote Originally Posted by Hell Hound View Post
Those ti's are prob close to 800w clocked,cpu 350w plus drives,pump and fans.You prob push it hard for too long. I would plug the two 8pin connectors to the third card,The booster is good for 350w 24/7.Was that 1020 during furmark+prime,30 min test should tell us something,lets see what happens then.
I was only pulling high 900's and low 1000's watts at the wall. With the aux PS connected (two 6 pins so should be ~150w total load on the aux unit), it runs great but the measured wattage at the wall never goes near 1100 watts, much less 1200. It stays in the high 900's with peaks into the 1000's during the Heaven bench.

I used to max at around 1200-1213 overclock due to artifacts and crashing. Last night I was almost at 1300 core and watts still stayed well below 1100 at the wall.