My xbox heatsink mod...
And my Sappire X1950XT ghetto duct mod..
I actually got better temps with this... and way quiter fan. lol
My xbox heatsink mod...
And my Sappire X1950XT ghetto duct mod..
I actually got better temps with this... and way quiter fan. lol
Intel i7 960 @ 4.2GHz | EVGA X58 SLI | OCZ Z 850W | Prolimatech Mega Shadow HS | 18GB Kingston HyperX DDR3 | 2x MSI GTX570 SLI W/C | Kingston 64GB V+ SSD | CM Stacker 830
This isn't exactly custom.... I'm putting together a mini itx box for my new shop and couldn't decide on a cpu cooler for the E8600.
I wanted something better than the stock intel cooler but all the good ones (quiet) seemed a little too expensive for this cheap, recycle build.
I had an unused stock i7 920 heatsink on the shelf, so I removed the fan and mounted it with #8-32 machine screws, and made the wire loop at the top from electric fence wire.
It's kinda ghetto but I think it will work well with a quiet 120mm fan laying on top which will cover the NB heatsink as well.
The two heatsinks touch, but still sit flat and well centered on their chips.
I'll have to wait until tuesday, when the Silverstone SG-05-B arrives to test it.
IMG_1041.JPGIMG_1042.JPG
IMG_1043.JPGIMG_1044.JPG
Last edited by dengyong; 05-23-2010 at 05:27 PM.
Instead of using the frankly poor (although i could be incapable of mounting them perfectly) stock AC VRM's sinks, i took the stock cooler and a Wizzard (dremel) to make the below, possibly could of done a neater job if i didnt do it on my lap one handed.
1st attempt i re-used pads, there wasn't much difference (maybe some new pads would of been better, but i refuse to pay for postage that not much less them the item i want ) so ended up sanding down the stand-offs so i could use abit of paste
Before i was getting a average max temp around 112c (all being pretty even) and now its 90c (although VRM1 hits 91, 95, 84 so i'll have a look at them at some point, VRM0 hits 91, 90, 89) at Crysis/Vantage highs.
Gigabyte EX58-UD5 | Intel i7 920 @ 4.01GHz, HT (3913B213) | TRUE (lapped & washered) | Kingston HyperX 12GB | Gigabyte 7970 OC | Dell 3008WFP | C300, WD Black 1TB, Green 1TB, and a VR | X-FI Titanium | akasa Eclipse-62 or Dell XPS 720 (ATX Mod)
Great job with the wire. It's funny you should post this as I have been doing the same thing with the buttload of 920 heatsinks I have lying around . Some of the lower-end wolfdales don't even need a fan on top them, provided there is some sort of air flow in the case.
I wish I thought of the wire though, my mounting system was much harder to craft and consisted of a ring cut with hold saws. =/
-------------------------------
Not From Concentrate
All Projects
Previous Projects:
S3 Mini ITX Chassis
The ArK
Uriel
Israfel
Veritas
Eldritch
wth
Rig 1 Asus ROG Strix B550-F WiFi, R7 5800x, 64GB Vengeance LPX 4*16GB, Zotac GTX 1070Ti, X-Fi Titanium, Enermax Revolution D.F. 850w, SSDs 768GB, HDD 3TB, CM 912HAF, NH D-15 Black.cr
Rig 2 Asus Maximus VI Hero, i7 4770K@4000, 32GB Ballistix VLP 4*8GB, Gigabyte GTX 970, eVGA G3 850, SSD 512GB, HDD 2TB, TT Element-T, NH D-14.
6200SE
Was getting over 62c at idle with stock tiny hsf
Mounted a Pentium 2 hsf on it,now idles at 50
I got a SLK900 heatsink that i'm gonna try next,ill post some pics then.
The daily system
2500k @4.3 - P8P67 Pro - 4GB Corsair XMS3 C8 1600 - 460 cyclone 875/2050
Custom heatsinks on itx motherboard.
All setup mounted in box from Corsair PSU.
XFX GTX 460 + mod backplate XFX 7200GS in v.ram:
EVGA GTX760 ||| AMD Athlom II X3 450 @ Phenon II X4 B55 ||| Gigabyte 990FXA-UD3 ||| 2x4GB Samsung 1600mhz ||| XFX 650W XXX ||| Samsung 840 Evo 120GB ||| Sound Blaster Z
Thermaltake Meka G1 ||| Audio Technica ATH-AD700 ||| Logitech G400S ||| Steel Series Sensei ||| Cooler Master Spawn ||| Zowie G-RF ||| XFX War Pad
You must live in a dustbox
Distributed Computing: Making the world a better place, one work-unit at a time.
http://www.worldcommunitygrid.org/index.jsp
I dont know what to say !!!!!!!!!!!!!!!!!!
I'm surprised XS members haven't posted more to this thread. It's Xtreme, guys!!! Liked my pics in the above posts?
If any of you guys got some pics, please share!
--two awesome rigs, wildly customized with
5.1 Sony speakers, Stereo 3D, UV Tourmaline Confexia, Flame Bl00dr4g3 Fatal1ty
--SONY GDM-FW900 24" widescreen CRT, overclocked to:
2560x1600 resolution at 68Hz!(from 2304x1440@80Hz)
Updated List of Video Card GPU Voodoopower Ratings!!!!!
I'll have some pics to post in a week or so when I get my MVG... long time lurker here :p
Long time since the last post in here. Anyways, I've got a question for you guys. I want to put an old NB/SB heatsink on to the chip in my router. I currently hang the router on the wall. What would be the easiest way to attach it? I currently have some artic silver 5, but I'm not sure if that will hold it. Can I mix it with something? Any ideas?
STEvil -
Have you tested your custom heatsink yet? I'm curious if the two opposing fans cause the airflow to be reduced along with the angle of the one fan to the fins. The V-style heatsinks have never worked very well for the fin area they have.
tiny amount of superglue at each corner and as5 in center, or get the AS Adhesive http://www.arcticsilver.com/ta.htm
We see heatpipe based cooling everywhere... But who can tell me what in in the pipe?
My Biggest Fear Is When I die, My Wife Sells All My Stuff For What I Told Her I Paid For It.79 SB threads and 32 IB Threads across 4 rigs 111 threads Crunching!!
Before:
After:
Bookmarks