Quote Originally Posted by Raja@ASUS View Post
If its freezing in UEFI it's unstable. Are you loading XMP or configuring DRAM settings yourself? XMP should show 1.35V on auto when it is applied and the system has been reBOOTed.

Do the freezes occur when at complete defaults and memory is left at DDR4-2133 (auto) after clear CMOS as well?

If so check the DRAM is not faulty. Also check if the kit has been programmed properly by Corsair. There are some LPX kits in the wild with missing profiles etc. If that's the case you will need to RMA the memory kit.

If that checks out, check each DIMM individually and see if you can locate an issue.
No Im not loading xmp leaving it on manual. cpu voltage is on auto and dram voltage I set to 1.200v. I set memory to 2800 which is the default for this specific one. I've run several memtests without errors. Cleared CMOS a few times as well.