Should scale quite well if you're getting 4.5G on air there George. How much voltage did you need?
Should scale quite well if you're getting 4.5G on air there George. How much voltage did you need?
ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.
Rampage IV Extreme tweaking guide
ASUS Z77 UEFI Tuning Guide for overclocking
Maximus 5 Gene OC Guide
Maximus VI Series UEFI OC Guide
Mine will Prime/Handbrake here at 4.6G Uncore with 1.35V. I have not tried it cold..
ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.
Rampage IV Extreme tweaking guide
ASUS Z77 UEFI Tuning Guide for overclocking
Maximus 5 Gene OC Guide
Maximus VI Series UEFI OC Guide
Uh oh - my X99 Deluxe is refusing to boot. Was running XTU's inbuilt stress test at 4.5 core, 4.2 uncore, 1.3V CPU 1.3V cache and machine suddenly shut down. RAM not yet touched. Tried rebooting and machine flicks on for a microsecond before the an audible OCP 'click' from the PSU.
Tried pulling the PSU cable and letting caps discharge for about 15min, tried booting again and machine will power on and stay on but noone's home - none of the POST debug LEDs are lighting and the board is stuck on POST code '00'. Have tried clearing CMOS several times and removing everything but CPU, RAM and one GPU with no change.
Any ideas folks?
Rig specs
CPU: i7 5960X Mobo: Asus X99 Deluxe RAM: 4x4GB G.Skill DDR4-2400 CAS-15 VGA: 2x eVGA GTX680 Superclock PSU: Corsair AX1200
Foundational Falsehoods of Creationism
Nay, mobo and CPU represent a rather significant investment so no other X99 board or 2011-3 CPU here.
I sure as hell hope it isn't CPU, but according to the mobo manual if there's a problem with CPU init then the CPU POST LED should be lit and I should be getting an error code of something from '06' onwards - '00' is apparently not used.
Rig specs
CPU: i7 5960X Mobo: Asus X99 Deluxe RAM: 4x4GB G.Skill DDR4-2400 CAS-15 VGA: 2x eVGA GTX680 Superclock PSU: Corsair AX1200
Foundational Falsehoods of Creationism
LegitReviews - 'X99 motherboard goes up in smoke' - oh, dear - this is more or less exactly what's happened to me, with the exception being that I wasn't trying to push RAM at the time and can't smell magic smoke.
EDIT: Hmm. With the CPU removed mobo powers up and while still showing error code '00', the CPU POST LED lights up. With the CPU installed the board powers up and shows error code '00', but the CPU POST LED does not light up. The board therefore appears to be at least functional enough to know whether there's a CPU installed.
Raja, opinion? More likely to be dead CPU or motherboard? I can't see or smell any burnt components, but as I'm not a review site I don't want to go pulling off heatsinks and lose warranty.
Last edited by SoulsCollective; 09-19-2014 at 10:51 PM.
Rig specs
CPU: i7 5960X Mobo: Asus X99 Deluxe RAM: 4x4GB G.Skill DDR4-2400 CAS-15 VGA: 2x eVGA GTX680 Superclock PSU: Corsair AX1200
Foundational Falsehoods of Creationism
ROG Power PCs - Intel and AMD
CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread
Sounds like the PSU OCP tripped due to current demand. You were probably pulling over 30 amps from EPS12V Best case scenario is that its just your PSU. Worst is it took the board and CPU with it when the shutdown occured. Ordinarily that should not happen - if OCP trips the board should POST again and maybe issue an anti surge warning after the rail went out of spec (due to shutting down). The VRM can more than handle the full load XTU would have been generating at that point.
If the PSU is clicking off now I would not try to power up that rig any more. You'd be best advised to RMA all three items. If you are USA based send me a PM if you want to RMA directly with us. If you're getting 00 and the PSU is staying on then it could be dead CPU and not the other two. In these situations if one component in the chain fails, it can knock out all three.
Have one guy on ROG that killed his 5960X while running 1.47 Vcore and 2.2VCCIN on chilled water. Not sure what he was running yet. Board was fine.
Last edited by Raja@ASUS; 09-20-2014 at 10:42 PM.
ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.
Rampage IV Extreme tweaking guide
ASUS Z77 UEFI Tuning Guide for overclocking
Maximus 5 Gene OC Guide
Maximus VI Series UEFI OC Guide
No dice - with CPU pulled board powers up and hangs with the CPU debug LED lit and error code '00', with CPU installed board powers up and hangs with error code '00' but CPU debug LED unlit. From this I'm thinking the mobo is at least functional enough to work out there's no CPU installed, but with CPU installed it can't even progress to first stage of POST.
This is puzzling me a bit too - XTU testing at 4.5GHz at 1.3v should, to my mind, not have caused OCP to trip unless something's off. If I was pushing vCore 1.4+ or running IBT or equivalent then I could sort of understand it, but these were basically the settings AI Tuner suggested (with the exception of the uncore boost, dialled in manuallly) running the testing software Intel provides.
Board is powering on and staying on, OCP not tripping any more, but machine is dead as a dodo stuck on '00'. No change using another PSU, sadly.If the PSU is clicking off now I would not try to power up that rig any more...If you're getting 00 and the PSU is staying on then it could be dead CPU and not the other two. In these situations if one component in the chain fails, it can knock out all three.
In Australia Have applied for CPU RMA from retailer, which sucks as they're on the east coast, I'm on the west, and postage across the country takes about a week.You'd be best advised to RMA all three items. If you are USA based send me a PM if you want to RMA directly with us.
Fingers crossed my Deluxe will be OK then. RMA'ing that will be a gigantic pain given how bulky the box is.Have one guy on ROG that killed his 5960X while running 1.47 Vcore and 2.2VCCIN on chilled water. Not sure what he was running yet. Board was fine.
Thanks for the input folks. Ideally I'd have another board or CPU to test with to narrow things down, but with what I have on hand I can't troubleshoot any further.
Rig specs
CPU: i7 5960X Mobo: Asus X99 Deluxe RAM: 4x4GB G.Skill DDR4-2400 CAS-15 VGA: 2x eVGA GTX680 Superclock PSU: Corsair AX1200
Foundational Falsehoods of Creationism
ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.
Rampage IV Extreme tweaking guide
ASUS Z77 UEFI Tuning Guide for overclocking
Maximus 5 Gene OC Guide
Maximus VI Series UEFI OC Guide
Why on earth didn't ASUS use two 8 pin EPS connectors? I just bought an R5E and even that only has an 8 pin + 4 pin. I wouldn't really consider 4.5ghz on 1.3v Vcore extreme overclocking yet its pushing that 8 pin WAY beyond its specs (IIRC the spec is 300 watts, so 6.25A for each positive wire, 40 is pushing 10 on each). Even with the extra 4 pin on the R5E, 40A is beyond the spec of 37.5A across both connectors. I know most PSU's nowadays use thicker 14AWG-16AWG wires so they're good go a bit beyond the ATX\EPS specs and that AVX pushes these CPU's to ridiculous levels of power consumption, but it seems to me that ASUS kind of dropped the ball here.
Rig specs
CPU: i7 5960X Mobo: Asus X99 Deluxe RAM: 4x4GB G.Skill DDR4-2400 CAS-15 VGA: 2x eVGA GTX680 Superclock PSU: Corsair AX1200
Foundational Falsehoods of Creationism
ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.
Rampage IV Extreme tweaking guide
ASUS Z77 UEFI Tuning Guide for overclocking
Maximus 5 Gene OC Guide
Maximus VI Series UEFI OC Guide
Right, which is why I was a bit concerned that OCP obviously did trip.
Have done some more testing and PSU is fine, mobo+CPU combination exhibit same behaviour when powered by another PSU. Have been in touch with retailer who have asked me to RMA both mobo and CPU at the same time, so should hear back from them later this week.
The point raised above re the EPS connectors is an interesting one - I was surprised that given the amount of times overclocking was mentioned on the mobo box only one EPS connector was present, given that all of the high-end boards I saw on the X79 chipset seemed to feature two as a matter of course and power consumption (particularly with native 8-core parts) hasn't dropped hugely since Ivy Bridge.
Rig specs
CPU: i7 5960X Mobo: Asus X99 Deluxe RAM: 4x4GB G.Skill DDR4-2400 CAS-15 VGA: 2x eVGA GTX680 Superclock PSU: Corsair AX1200
Foundational Falsehoods of Creationism
Sorry to hear about your problems Souls, hope you get it all sorted soon.
Heard a rumour that the Rampage V Extreme is getting a whole new board revision soon, any truth in this Raja? possibly you wont be able to comment because of NDA if true, do seem to be more than the usual problems from a brand new board that maybe BIOS updates cant fix properly? sure have been a lot of BIOS updates since board was released.
For sure they are in short supply in UK, put in my order to Scan over a week ago, they keep telling me tomorrow and now its status is saying waiting for an ETA, same for X-99 Deluxe.
I just wish I knew when I will get my board I've paid for.
Seriously thinking of changing to MSI or something now?
I have heard no such thing. Same old rumor mill stuff. Pay no attention to it.
We always roll out a lot of UEFI updates for our boards around launch. The platform is new, microcode updates were still being provided close to launch. Ask anyone that has an R5E and other boards how our UEFI work compares to other vendor boards at this point.
As you are based in Scotland these questions should be directed at someone from ASUS UK really (try their FB page or see if they have a rep on the UK forums somewhere). I only cover North American users for queries and I get more than I can handle at new product launches.
Thanks!
Last edited by Raja@ASUS; 09-23-2014 at 04:02 AM.
ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.
Rampage IV Extreme tweaking guide
ASUS Z77 UEFI Tuning Guide for overclocking
Maximus 5 Gene OC Guide
Maximus VI Series UEFI OC Guide
Got notification from Scan my ASUS RAMPAGE V EXTREME is shipping now, so pleased.
You only look at American queries, are you serious? Whats the difference between the American boards and UK ones? Or are you passing the buck
Really worried now
You support only North American Asus customers here, is that what you are saying???
You know damn well Asus UK are a waste of time.
Not happy with Asus at all anymore.
Last edited by M31; 09-23-2014 at 05:29 AM.
You aren't alone my friend. I own the X99 Deluxe and Xonar Essence STX, no sound at all. Not with official drivers nor the hacked UNi Xonar. People suggested changing Gen version on the port, however that didn't help. I read about this issue quite a few times now, the fact that even the Asus representative sort-of shrugs it off worries me. Starting to think I should have gone with MSi after all, because the onboard sound is dreadful.
Worst GSTFY I've ever heard, all our motherboards came from far east ... shame on Global ASUS, never realised this was a North American support thread only
Bookmarks