ASUS Z97 Motherboards - Official Support Thread

[l0ud_sil3nc3]

Got ahold on an M7G the other day. Tested so far with BBSE and Samsung, PSC will follow.
Note that the board overvolts Vmem by 0.025-0.035V compared to the value set in the BIOS.

Sam what were RTL's for the Samsung runs?

Took me a minute on how to get them to 42, 43, 4, 4 but here's how I do it.

Boot into bios and set bclk to 96.3 then save and reboot back in to the bios. Now set MRC fast boot to disabled and then set initial RTL to 47 and save settings. Once again reboot in to the bios to confirm that RTL's are 42, 43, 4, 4 and then enable MRC fast boot so the it doesn't try to to retrain.

Then boot in to windows and raise bclk to 100 with Turbo V light, and bingo proper Samsung RTL's.

Hope this helps someone