SuperPi32m 5Ghz Ivy All Out Challenge!

[l0ud_sil3nc3]

problem here is you didnt get the exact right vdimm. no trolling, no jokes. those bbse are picky... once you dial in the right volts, they will comply. i have a similar issue with UP7. I have to fine tune it with the llc level to get it to play nice.

yes, i do know exactly what sticks you are talking about... both George and myself have been able to do numerous 2600 passes 8-11-7 air. allen, want the "better" kit? 2650 8-11-7 air by myself and dino...

now that ive talked all this smack... time to not bench as work continues to consume all my time. hell its been a while since ive even posted.

He is talking about the 6-9-7-28 @ 2654, not the BBSE Davis

I feel bad because I am pretty sure I gave him the wrong voltage (1.88v vs. 1.885), and I know it seems miniscule but that is just how that set acts.

Allen will have all of my good BBSE by tomorrow, so between him and I, I figure someone in the US will be able to get a decent run in with them on cold

BBSE has been so fail for me, but I am going to try the 2200 c9 Ripx under cold and it they suck I am done. Who needs BBSE when you have 6-9-7 PSC

[dinos22]

yeah BBSE very finnicky. BBSE might be the go if you can get them going at 1300 6-9-6. from memory 1250 was ok but 1300 was hard on my kit which is a lot crappier than zen's

[ZenEffect]

He is talking about the 6-9-7-28 @ 2654, not the BBSE Davis

I feel bad because I am pretty sure I gave him the wrong voltage (1.88v vs. 1.885), and I know it seems miniscule but that is just how that set acts.

Allen will have all of my good BBSE by tomorrow, so between him and I, I figure someone in the US will be able to get a decent run in with them on cold

BBSE has been so fail for me, but I am going to try the 2200 c9 Ripx under cold and it they suck I am done. Who needs BBSE when you have 6-9-7 PSC

oh my bad... guess you thought 6-9-7-28 @ 2654 was a hard thing to do (j/k) much props to Allen for trying to chase that down. i dont have the cash or time to even attempt it.
try some 4 slot bdbg action under cold.

dino, that kit has been collecting dust for a long time now no time to bench or try cold.

[Splave]

He is talking about the 6-9-7-28 @ 2654, not the BBSE Davis

I feel bad because I am pretty sure I gave him the wrong voltage (1.88v vs. 1.885), and I know it seems miniscule but that is just how that set acts.

Allen will have all of my good BBSE by tomorrow, so between him and I, I figure someone in the US will be able to get a decent run in with them on cold

BBSE has been so fail for me, but I am going to try the 2200 c9 Ripx under cold and it they suck I am done. Who needs BBSE when you have 6-9-7 PSC

Thanks man, good luck with the 30 some odd sticks I sent man! Between us should maybe have 1 or 2 good ones. I refuse to by more bbse, too much trash

[bullant]

I was able to get two loops to pass @ 1354 Mhz @6-10-6-28 tWCL6,will keep trying when refilled

[Splave]

Hey bull ant got any frosty pics? Love to see the 4 dimms frosty

[bullant]

Hey bull ant got any frosty pics? Love to see the 4 dimms frosty

Ahah,can't see them babies bro they to busy under ice all tuned up

[tool_462]

Do BBSE not play nice under 28 tRAS?

My chip IMC is real bad and chip can't hit 5GHz but I see you all running 28.

I haven't done any Pi tweaking since E8600 + D9 + REX or Biostar Tpower i45 days.

[Splave]

22 should be fine on good stuff

[dinos22]

dino, that kit has been collecting dust for a long time now no time to bench or try cold.

would happily collect it again off ya to borrow for a while LOL

[crustytheclown]

Oh yes BBSE's are tricky... my kit above 1.85-1.86v is no go on air...happy they do 1333 8-11-7-22 tight at those volts...
Also mine HATE vtddr... 0.75 nothing more nothing less... Good thing they have no coldbug which makes it really easy to bench with...
Also with them all memory related voltages(vsa-vsio etc) need fine tuning in order to run properly...
Imho in order to bin bbse first make sure your cpu is up to it and then try fine tuning all your voltages on air to get them at at least 1300 8-11-7-22 with tight thirds.
After that geting them cold won't be that tricky...

[bullant]

Did manage 2 loops of 32M as well @these timings the other day too,will try again with memory colder and upon refill

[l0ud_sil3nc3]

up all night again lol





thanks Sam for the BBSE, what made me decide to try these under cold is the extreme amount of heat they were emitting in comparison to other kits, turned out to be a good hunch

pics in a bit. . .

[TaPaKaH]

Would never have thought that these 2200C9 would clock so well under cold given results on air.
I can ship you the reason(s) why I sold these, if you're willing to give them a similar treat

[Splave]

l0ud show us the 7-8-6 aida lol crazy


trying those cas6 2000 flare right now

[hiwa]

l0ud show us the 7-8-6 aida lol crazy


trying those cas6 2000 flare right now

cas6 2000? or cas 7 Flares

[Splave]

2000 c6 flare no wazza and sloppy secondaries


Strange PSC, not stable 8-12-8-28 1.92v -95c..............

2600 7-10-7 pass -50c 1.92v
2650 7-10-7 fail -50c 1.92v
2650 7-10-7 fail -68c 1.92v
2650 7-10-7 fail -75c 1.92v
2650 7-10-7 fail -50c 1.94v
2650 7-10-7 pass -55c 1.94v

2700 not possible to get stable passed 1 loop tried every combination. over -58c is immediate fail.
2600 6-10-7 55
2600 7-9-7 55
2600 7-10-6 okay

Very weird....

[ZenEffect]

2000 c6 flare no wazza and sloppy secondaries


Strange PSC, not stable 8-12-8-28 1.92v -95c..............

2600 7-10-7 pass -50c 1.92v
2650 7-10-7 fail -50c 1.92v
2650 7-10-7 fail -68c 1.92v
2650 7-10-7 fail -75c 1.92v
2650 7-10-7 fail -50c 1.94v
2650 7-10-7 pass -55c 1.94v

2700 not possible to get stable passed 1 loop tried every combination. over -58c is immediate fail.
2600 6-10-7 55
2600 7-9-7 55
2600 7-10-6 okay

Very weird....

if those are the sticks i think they are.... 2nd's are a but can get pretty tight. and IF those are the same as I think they are, c7 2700 has been done on them already. watching this thread makes me want to run some 32m again... ive still got a few tricks and kits.

Allen, I noticed in another thread that you believe the 3rd letter of gskills naming convention is irrelevant? did I read that correctly? if so, ive got a few xdt and one xdz that i need to try out. I think the only one ive tried was the early gskill eco which are xdt (literally looked last night.) psc + up7 has been extremely difficult lately with f6c bios. gotta try me an asrocket.

George, PM me ive got an idea and a means.

[Splave]

Not sure bro, they are l0uds he bought from you you have some insight on the hating cold?

[S_A_V]

S_A_V - 6:17:219 - 104x48 - 1250.6MHz - 6-9-5-22-72-1 - ASUS Maximus V Extreme - G.Skill F3-16000CL6D-4GBPIS 2X2Gb/PSC - 2.15V - CPU LN2 -40C / RAM LN2 -170C

[ZenEffect]

Not sure bro, they are l0uds he bought from you you have some insight on the hating cold?

never benched the asrock so i couldnt tell you. they were running much colder than that on giga iirc.

[l0ud_sil3nc3]

booom!

















probably my favorite pic



epeen screenie lol

[andressergio]

booom!

awesome l0ud !!! gratssssssss great pics and results !!!

[Splave]

epeen fully erect, sorry didnt answer my phone l0ud ttyt broski

[Splave]

Splave - 6:16:563 - 47x106.4 - 1277MHz - 7-9-6-18-60-1 - ASROCK OCF - Avantium 2133mhz 2x2gb/BBSE - 2.1v - CPU -45c // MEM -125c

18 more of these sticks to try they fail 2450 8-11-7 on air